Materials Engineers For Hire

  • Materials Engineering
Suggestions:
more

Countries

Specific Location

Exams

Hourly Rate (USD)

Rating

Online

Showing 26 results
  • Hire     govindasamyjgces
Hire     govindasamyjgces

    govindasamyjgces govindasamyjgces

    India $20 USD / hour
    Freelancer
    India
    4.4
    7 reviews 7 reviews $20 USD per hour
    Here i have listed some of my area of expertise Metallurgy /Materials Science Quality Assurance /Quality Inspection Heat Treatment Six Sigma /Problem Solving Failure Analysis ISO 9001/IATF 16949 /ISO 14001/OHSAS18001/ISO 27001/ISO 10002 /CQI-9 Supplier Sourcing /Product Sourcing Lean Management /TQM Steel...
    Here i have listed some of my area of expertise Metallurgy /Materials Science Quality Assurance /Quality Inspection Heat Treatment Six Sigma /Problem Solving Failure Analysis ISO 9001/IATF 16949 /ISO 14001/OHSAS18001/ISO 27001/ISO 10002 /CQI-9 Supplier Sourcing /Product Sourcing Lean Management /TQM Steel /Aluminium /Cast Iron Forging /Casting /Welding/Powder Metallurgy PPAP/Control Plan /FMEA Material Science Legal Research/ Legal Drafting Legal Consulting Contracts Commercial Law Securities law Regulatory Compliance Financial Advisor Business Plans Fundamental And Technical analysis Customized Legal documents for USA. UK. EU , India and other countries for Intellectual Property Rights - Trademarks, Patents, and Copyright Terms of Service Privacy Policy - ( Compliance of GDPR , CCPA ) Non-Disclosure Agreement Shareholder Agreement Lease Agreement Note : 24/7 customer support and unlimited iterations free of cost less
  • Hire govindasamyjgces
  • Hire     assignsolver
Hire     assignsolver

    assignsolver assignsolver

    Pakistan $9 USD / hour
    ''Just try me once and get impressed forever''
    Pakistan
    1.5
    2 reviews 2 reviews $9 USD per hour
    اللَّهُمَّ عَلِّمْنِي الْكِتابَ وَالْحِكْمَة، وَفَقِّهْنِي فِي الدِّينِ (O Allah! Teach me the Book and wisdom, and grant me an understanding of the religion) I have more than 12 years of writing experience as I started my online writing career in 2007/8. In this duration, I have successfully served more than 12,000...
    اللَّهُمَّ عَلِّمْنِي الْكِتابَ وَالْحِكْمَة، وَفَقِّهْنِي فِي الدِّينِ (O Allah! Teach me the Book and wisdom, and grant me an understanding of the religion) I have more than 12 years of writing experience as I started my online writing career in 2007/8. In this duration, I have successfully served more than 12,000 clients with the full amount of satisfaction by providing them with supreme quality content. My specialties are ▶ ⭐Report, Research & Technical Writing ⭐Summaries, Critique & Peer Review ⭐Argumentative & Descriptive Essays ⭐Thesis & Dissertation ⭐STATA, SPSS and Matlab ⭐Electrical engineering & Matlab & Mechanical engineering ⭐Medical writing ⭐Proofreading & Editing ⭐Rephrase & Paraphrase ⭐Business & Marketing Plans ⭐Article, Blogs & Content Writing ⭐Resumes/CVs & Cover Letters ⭐ Physics/Chemistry/Math ⭐Accounting / Finance ▶ I provide a guarantee for; PLAGIARISM FREE work, Best Quality work in very Reasonable Prices and Unlimited Revisions until the client’s satisfaction. ▶ I am also familiar with different writing and referencing styles; Harvard, APA, Chicago & IEE. ▶ A person who is here to make you relax by his quality of work. Just place your order and feel RELAX. less
  • Hire assignsolver
  • Hire     ljayasooriya83
Hire     ljayasooriya83

    ljayasooriya83 ljayasooriya83

    Sri Lanka $12 USD / hour
    Team of talented and well experienced Engineers
    Sri Lanka
    4.0
    5 reviews 5 reviews $12 USD per hour
    LEDS - LISHAN ENGINEERING AND DESIGN SOLUTIONS I am Lishan, a mechanical engineer who is graduated from university of Moratuwa Sri Lanka. I also posses a Masters Degree (Research) in computational fluid dynamics and I have also worked as a visiting lecturer. With me there is a group of engineers, app developers,...
    LEDS - LISHAN ENGINEERING AND DESIGN SOLUTIONS I am Lishan, a mechanical engineer who is graduated from university of Moratuwa Sri Lanka. I also posses a Masters Degree (Research) in computational fluid dynamics and I have also worked as a visiting lecturer. With me there is a group of engineers, app developers, programmers and graphic designers who are innovative, creative, well experienced and skillful with good designing experiences. We can take projects which extend over a large area of engineering and design fields. You can find us in many freelancing platforms including Fiverr, upwork and Toptal and we have undertaken and completed many jobs over the years in those platforms. So it is your time to work with us and experience the quality and accuracy of our works. less
  • Hire ljayasooriya83
  • Hire     An2nett
Hire     An2nett

    An2nett An2nett

    Philippines $15 USD / hour
    Senior Quantity Surveyor, Construction Estimator
    Philippines
    2.5
    1 review 1 review $15 USD per hour
    I am a member of Philippine Institute of Certified Quantity Surveyors with 14 years working experience in Construction Industry as Quantity Surveyor, Estimator and Cost Engineer. I am highly competent in detailed quantity take-off, preparation of Bill of Quantities (NRM, POMI, SMM), and Valuation of Contractor's...
    I am a member of Philippine Institute of Certified Quantity Surveyors with 14 years working experience in Construction Industry as Quantity Surveyor, Estimator and Cost Engineer. I am highly competent in detailed quantity take-off, preparation of Bill of Quantities (NRM, POMI, SMM), and Valuation of Contractor's variation claims. I have excellent skills in CostX, Planswift, Blubeam, Mitek, PowerBI, Microstation, AutoCAD, Excel/Word and a fast learner for new software needed to fulfill the job. And I have handled projects almost around the globe. -- Project Sector’s Covered • Residential Commercial and Industrial Buildings • Hotel Towers • Oil & Gas facilities • Land Development and Infrastructures -- I am able to provide takeoff and markups of the following trades (Quantity Surveying): • Civil, Earthworks and Structural Works • Concrete, Formworks and Reinforcement • Structural Steel & Timber, Trusses and Roofing • Masonry, Bricks & Block Works and Precast • Plastering, Painting and Rendering • Ceiling, Drywall and Partition • Flooring Finishes, Tiling and Epoxy Coating • Thermal Insulation and Waterproofing • Doors, Windows and Glazing • Interior Finishes and External Cladding • Landscaping Works Will provide detailed BOQ in excel format or any required format & mark-up plans for your reference and checking. Turnaround Time : 3 to 4 days but can also prioritize urgent jobs. ALSO: I am in collaboration with my husband who is an Architect and expert in Revit, SketchUp, Lumion, Naviswork and AutoCAD and also with my Mechanical Engr friend who can handle the MEP Works, so we can provide total package of Design with Estimates. less
  • Hire An2nett
  • Hire     BOSIREX
Hire     BOSIREX

    BOSIREX BOSIREX

    Kenya $50 USD / hour
    mechatronics engineer
    Kenya
    2.3
    2 reviews 2 reviews $50 USD per hour
    i am a qualified professional mechatronics engineer .am an expert in both combined mechanical and electrical and electronics engineering and control system and automation.i will offer best services in the skills i highlighted above as am always ready to explore my skills
    i am a qualified professional mechatronics engineer .am an expert in both combined mechanical and electrical and electronics engineering and control system and automation.i will offer best services in the skills i highlighted above as am always ready to explore my skills less
  • Hire BOSIREX
  • Hire     KartikSheladiya
Hire     KartikSheladiya

    KartikSheladiya KartikSheladiya

    India $30 USD / hour
    A BLDC motor designer and CAD/CAM Engineer
    India
    2.0
    1 review 1 review $30 USD per hour
    By profession I am a passionate motor designer and have worked with BLDC(Brushless Direct Current), PMSM Radial(Inrunner and Outrunner) as well as Axial motors(dual stator/rotor) with IPM as well as SPM topology rotors. I have been using the concepts of Magnet Embraces, Halbach array and Reluctance torque in motor...
    By profession I am a passionate motor designer and have worked with BLDC(Brushless Direct Current), PMSM Radial(Inrunner and Outrunner) as well as Axial motors(dual stator/rotor) with IPM as well as SPM topology rotors. I have been using the concepts of Magnet Embraces, Halbach array and Reluctance torque in motor designing to have higher performance and efficiency. I am postgraduate CAD/CAM engineer with high proficiency in following: 1. Ansys Maxwell for Motor designing and electromagnetic optimizations and FEA 2. Matlab-Fuzzy Inference System and Adaptive Neuro-FIS. 3. Ansys Workbench, for fatigue, static structural, transient, explicit dynamics and CFD(Computational Fluid Dynamics) FEA predictions 4. Autodesk Inventor and Keyshot for 3D CAD modelling 5. Electronics, PCB design and Manufacturing. 6. Design Spark 7. Plagiarism free Literature Review and Literature Survey. 8. Technical report writing. Can also provide you with a 3D printing solutions for rapid prototyping. less
  • Hire KartikSheladiya
  • Hire     farizaneeq12
Hire     farizaneeq12

    farizaneeq12 farizaneeq12

    Pakistan $12 USD / hour
    Mechanical Design, SEO, Research Writer ...
    Pakistan
    1.3
    1 review 1 review $12 USD per hour
    I am a mechanical engineer. I am expert in 1) Research writing 2) Strong problem-solving skills for solving Mechanical design issues 3) Three dimensional CAD models and drawings for both parts and assemblies 4) CAD/CAM modeling using Solidworks and ANSYS. 5) FEA and CFD Analysis in ANSYS 6) Article and SEO...
    I am a mechanical engineer. I am expert in 1) Research writing 2) Strong problem-solving skills for solving Mechanical design issues 3) Three dimensional CAD models and drawings for both parts and assemblies 4) CAD/CAM modeling using Solidworks and ANSYS. 5) FEA and CFD Analysis in ANSYS 6) Article and SEO writing. 7) Thesis and Research Paper Writing 8) Supply Chain management less
  • Hire farizaneeq12
  • Hire     Hayat87
Hire     Hayat87

    Hayat87 Hayat87

    Pakistan $20 USD / hour
    CAD 2D & 3D Designer, Building, MEP
    Pakistan
    1.0
    1 review 1 review $20 USD per hour
    "بِسْمِ ٱللَّٰهِ ٱلرَّحْمَٰنِ ٱلرَّحِيمِ" Software expert, 1. Autocad 2. Revit 3. MS Office, Excel, Power Point 4. Primavera P6 5. Macquay Software (duct and pipe sizing) 6. HAP (HVAC Load Calculation) 7. Adobe Photoshop & Illustrator. Services offered- 1. Revit Conversion of 2D pdf/dwg file to 3D. 2. Estimation of...
    "بِسْمِ ٱللَّٰهِ ٱلرَّحْمَٰنِ ٱلرَّحِيمِ" Software expert, 1. Autocad 2. Revit 3. MS Office, Excel, Power Point 4. Primavera P6 5. Macquay Software (duct and pipe sizing) 6. HAP (HVAC Load Calculation) 7. Adobe Photoshop & Illustrator. Services offered- 1. Revit Conversion of 2D pdf/dwg file to 3D. 2. Estimation of MEP quantities, Takeoff for any MEP system, preparation of BOQ. 3. Preparation of tender drawing, shop drawing and As-built drawings in AutoCAD. 4. load calculation for HVAC system using HAP software. 5. Technical submittals preparation. 6. Plumbing system load calculation by calculation fixture units. 7. Pipe sizing using Mcquay software, Duct sizing using Mcquay Software and equipment selection. 8. Air devices selection, VCD, VAV, CAV,AHU, FCU, ESP calculation for ducts and pump head calculation. 9. Fire fighting system design as per NFPA 13, 14, 2, 25. 10. Project Scheduling using Primavera P6. 11. Product Designing Why hire me? -I have 09 years of experience in construction field. -Graduate and professional. - Will provide highest quality work with lowest cost. Work Terms 24/7 available, any mean of communication call, email, chat, but most liked mean is through freelancer.com. Project Message Board (PMB), work as per your stratification, unlimited revision without any additional cost. less
  • Hire Hayat87
  • Hire     karimankamal47
Hire     karimankamal47

    karimankamal47 karimankamal47

    Egypt $30 USD / hour
    LICENSED ENGINEER IN USA (PE)
    Egypt
    3.1
    1 review 1 review $30 USD per hour
    we are CIVIL ENGINEER @ MECHANICAL ENGINEER and teaching assistant in faculty of engineering I have designed and detailed many buildings With (USA Codes), British Codes and Euro Codes-indian code-Australian Code ), click on (hire kariman) to contact with me we have experience in  structure (rivet -teckla...
    we are CIVIL ENGINEER @ MECHANICAL ENGINEER and teaching assistant in faculty of engineering I have designed and detailed many buildings With (USA Codes), British Codes and Euro Codes-indian code-Australian Code ), click on (hire kariman) to contact with me we have experience in  structure (rivet -teckla -robot -sap2000-cad-safe-etc)  (MEP+HAVC+ELEC +ARCH+STRC) DRAWING  Soil Mechanics  Design of roads and airports  steel structure+ reinforced concrete design +Timber+ Shop Drawings  Water Treatment  collection works (culverts,syphon-dans-weirs)  Architectural - Structural  Civil - Sheet Metal  fluid mechanics  hydraulics  Hydrology  sewage networks  water treatment plant  GIS -remote sensing +google earth  Engineering Waterfall Project Management  Ansys  Create a bill of materials required to build a building( estimation )  survey  math  soildwork+Mold Design + Plastic Mold design + Injection Mold design  MATLAB  primavera + MS project less
  • Hire karimankamal47
  • Hire     RoryWRyan
Hire     RoryWRyan

    RoryWRyan RoryWRyan

    United Kingdom $30 USD / hour
    Mechanical Engineer M.Eng (1st Class degree)
    United Kingdom
    1.8
    1 review 1 review $30 USD per hour
    Hello! I am a positive, hardworking Mechanical Engineer based near London. I have very good skills in Autodesk Inventor and SolidWorks and moderate skills at AutoCAD from working as a Design Engineer in the Oil and Gas industry and Medical Robotics industry. I have experience with both Imperial (US) and Metric...
    Hello! I am a positive, hardworking Mechanical Engineer based near London. I have very good skills in Autodesk Inventor and SolidWorks and moderate skills at AutoCAD from working as a Design Engineer in the Oil and Gas industry and Medical Robotics industry. I have experience with both Imperial (US) and Metric systems. I gained a 1st Class Masters and Bachelors of Mechanical Engineering. I am English and have worked in Britain, Germany and America producing 3D models, technical drawings and documents, root-cause analysis studies, 6Sigma analysis and technical support. I have great communication skills, a passion for engineering, modelling and drafting, and enjoy being challenged! less
  • Hire RoryWRyan

Hey , here are some offline freelancers

Hey , here are some offline freelancers matching ""