Assembly online project bidding jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    9,225 assembly online project bidding jobs found, pricing in USD

    I have secured a project that requires metalwork to be modelled in Autodesk Inventor. Works include Feature Balustrade, handrail and stanchions to Balcony (ref: Drwgs. CB103, 200 and CB702). Standard balustrade to Stair 2 and Landing (ref CB103 CB702). Wall mounted handrail and posts to Stair 1 and Stair 3 (ref CB702 CB703) . Handrail to Link Bridge

    $62 (Avg Bid)
    $62 Avg Bid
    4 bids

    I have secured a project that requires metalwork to be modelled in Autodesk Inventor. Works include Feature Balustrade, handrail and stanchions to Balcony (ref: Drwgs. CB103, 200 and CB702). Standard balustrade to Stair 2 and Landing (ref CB103 CB702). Wall mounted handrail and posts to Stair 1 and Stair 3 (ref CB702 CB703) . Handrail to Link Bridge

    $110 (Avg Bid)
    $110 Avg Bid
    7 bids
    Design project 6 days left

    I need a 3D model of something. Need an animation of a machine (I have the general assembly drawing). High level detailing not required.

    $124 (Avg Bid)
    $124 Avg Bid
    19 bids

    ...components: base, column, normal screw, pointy screw, L-bracket and wire shelf. I need a "tally" of these items - each piece drawn out at the start of the manual. Then I need some "assembly" drawings - the columns bring screwed into the base, two people flipping the system upside down, an assembled system, and one with the L-brackets being screwed to the base

    $138 (Avg Bid)
    $138 Avg Bid
    20 bids
    Trophy icon Hinge/Pin Mechanism 6 days left

    Hello Freelancers, your task today is to h...quick to answer. FINAL NOTE: I will leave a good tip to the winner if the design is thought out well and the model is actually feasible and or at least working as a proper assembly. The potential for up to $250 is on the table here, depending on how well the model is. I use Solidworks for your reference.

    $100 (Avg Bid)
    Guaranteed NDA
    $100 Avg Bid
    0 entries

    Hi, I'm looking for someone based in South Africa with english as a first language and who pays great attention to detail. I write and assemble commercial real estate appraisal reports for my clients. They are often more than 50 or 60 pages each, but on an overall basis I'd say less than half is original text. See yellow highlights within attached MSWord base model doc. I usually do ...

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    22 bids

    Basically and in short terms, I need to control t...Freelancer should be able to: -Create a working code that can be sent to me online and I will do the assembly. -Have experience not only in coding but worked previously on Electronics Project and can help in the assembly of different electronics part in order to successfully make the project working.

    $177 (Avg Bid)
    $177 Avg Bid
    31 bids

    microprocessor and assembly language tasks

    $28 (Avg Bid)
    $28 Avg Bid
    18 bids

    Write the program filling each k-th byte of the CGA screen memory, starting from the k location with the value of 50h + k, where k is the next to last digit of (280916) + 7. Comment screen change when you run it assumming that the starting screen is full of spaces (20 07 20 07...).

    $49 (Avg Bid)
    $49 Avg Bid
    5 bids
    EXCEL - PDF - BLUEBEAM 4 days left
    VERIFIED

    Hello, I'm looking for a module or VBA that will create PDF for every cell selection based on criteria [Attachment 02 - Assembly Sheet]. Final goal is to take the PDF and overlay with other PDF [Attachment 01].

    $99 (Avg Bid)
    $99 Avg Bid
    19 bids
    IKEA - Furniture Assembly 3 days left
    VERIFIED

    Ineed someone to assemble my IKEA furniture. Please see the list below. 1. 1 TARVA Bedside table, 48x62 cm. (Article number: 102.196.11) 2. 1 TARVA Bed frame. (Article number: 302.499.47) 3. 1 JOKKMOKK Table and 4 chairs. (Article number: 202.111.05)

    $148 (Avg Bid)
    Local
    $148 Avg Bid
    2 bids

    ...stage of the computer is: 1st generation software, originated from the year 1951 is still using the machine language, the binary language only, while in 1959 already using assembly language, the language created to facilitate for programming into machine language with the help of a translator. The second generation software, started in 1959 until 1965

    $116 (Avg Bid)
    $116 Avg Bid
    3 bids

    Design Pipeline proce...Pipeline processor for RISC based instruction set on Xilinx ISE verilog for Spartan 3E board. Instruction set is given and we need certain kind of output based on designed assembly code. Code should be loaded on Instruction memory and it's already done. we have only 2 days for that but processor is 8bit and instruction is 16bit

    $104 (Avg Bid)
    $104 Avg Bid
    8 bids

    Create 3d drawing of car chassis from 2d design and photos to produce sheet metal parts for cutting with a CNC plasma cutter and assembly drawings

    $414 (Avg Bid)
    $414 Avg Bid
    70 bids

    NATIVE ENGLISH SPEAKERS ONLY Hi, I write and assemble commercial real estate appraisal reports for my clients. They are often more than 50 or 60 pages each, but on an overall basis I'd say less than half is original text. See attached MSWord doc sample. I usually do about one or two a week, but sometimes I get overload - which is now the case. There are numerous components of informat...

    $34 / hr (Avg Bid)
    $34 / hr Avg Bid
    24 bids
    Design a Water Steamer Unit 1 day left
    VERIFIED

    ...functionality and the heating assembly too. Should be 1200 W capacity. Your job is to design only Heating Unit, where steam is generated, Water tank and supply and electronic circuit for that. User should be able to regulate the heat, steam and must have auto shutoff feature too. The outside plastic enclosure assembly is not required or expected from

    $63 (Avg Bid)
    $63 Avg Bid
    9 bids

    We are electronic manufacturing and assembly company and we're looking for an experienced and creative UI/UX Designer to join our PCB team! As an UI-UX Designer , you will be responsible for delivering the best online user experience, which makes your role extremely important for our success and ensuring customer satisfaction and loyalty. We're looking

    $366 (Avg Bid)
    $366 Avg Bid
    54 bids

    ...and casing. Our goal is to come up with a design which is unique and stands out from competitors products. New design should reduce manufacturing cost, assembly time and packaging cost. This project requires in-depth research of LED LIGHTS segment and thorough understanding of competitors' products. We need to come up with unique quality and features

    $1660 (Avg Bid)
    $1660 Avg Bid
    24 bids

    ...your choice , by Catia) 20% 4) Cost Analysis (cost breakdown of designed and Standard parts) 20% 5) Technical Drawings ( 2D Assembly+BOM and 2 part drawings) 20% Total

    $143 (Avg Bid)
    $143 Avg Bid
    8 bids

    Given the specifications and design details, a 3D Solidworks assembly is required

    $15 (Avg Bid)
    $15 Avg Bid
    24 bids

    I require the design of a 3d enclosure for a circuit board project: The enclosure is required to contain: PCB assembly (~110mm X 60mm) Mainboard with submodules. The PCB should attach firmly to the enclosure with mounting points/screws. Two small speakers (+-40mm square) Associated Speaker type “slots” Mounting standoff for internal

    $157 (Avg Bid)
    $157 Avg Bid
    59 bids

    Project: Design a can crasher mechanism; analyze it (kinematics and kinetics analysis); draw your graphs by Matlab or Excel. Use [login to view URL] to analyze your mechanism and compare to the analytical results. Written Report Format: • Background, the need, and the application for this mechanism • List of specification and requirements • Introduction, explain

    $40 (Avg Bid)
    $40 Avg Bid
    1 bids

    Project: Design a can crasher mechanism; analyze it (kinematics and kinetics analysis); draw your graphs by Matlab or Excel. Use [login to view URL] to analyze your mechanism and compare to the analytical results. Written Report Format: • Background, the need, and the application for this mechanism • List of specification and requirements • Introduction, explain

    $50 (Avg Bid)
    $50 Avg Bid
    1 bids

    Project: Design a can crasher mechanism; analyze it (kinematics and kinetics analysis); draw your graphs by Matlab or Excel. Use [login to view URL] to analyze your mechanism and compare to the analytical results. Written Report Format: • Background, the need, and the application for this mechanism • List of specification and requirements • Introduction, explain

    $40 (Avg Bid)
    $40 Avg Bid
    1 bids

    Project: Design a can crasher mechanism; analyze it (kinematics and kinetics analysis); draw your graphs by Matlab or Excel. Use [login to view URL] to analyze your mechanism and compare to the analytical results. Written Report Format: • Background, the need, and the application for this mechanism • List of specification and requirements • Introduction, explain

    $40 (Avg Bid)
    $40 Avg Bid
    1 bids

    Hey, I am looking for support to develop an augmented reality app for industrial application (assembly task) so i am looking forward for some one who could mentor me over the several steps of the App development using Unity3d + Vuforia. Thank you in advance

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    39 bids

    commutator need to be place inside hollow pipe in pressing machine. I need a holding type method inside pipe, After pressing of commutator to another assembly. Pipe only return back.

    $101 (Avg Bid)
    $101 Avg Bid
    9 bids

    ...your choice , by Catia) 20% 4) Cost Analysis (cost breakdown of designed and Standard parts) 20% 5) Technical Drawings ( 2D Assembly+BOM and 2 part drawings) 20% Total

    $2482 (Avg Bid)
    $2482 Avg Bid
    15 bids

    We have a project where we need the m-code or cam program so we can have these parts made in our machine. Parts are a 4" x 4" cylinder that is a few inches long. Two parts to each assembly and we have allot of these we will need done of all different measurements.

    $95 (Avg Bid)
    $95 Avg Bid
    3 bids

    I need help with a project on Assembly Language Applications. let me know if you can help

    $37 (Avg Bid)
    $37 Avg Bid
    13 bids

    Teach me the concepts of Mips and Intel assembly

    $19 (Avg Bid)
    $19 Avg Bid
    1 bids

    ...methods (BKMs) • Setting up a library repository structure and comprehensive library symbol checking process to assure it meets Design for Manufacturing (DFM) and/or Design for Assembly (DFA) criteria. Qualifications You should possess a minimum of four years degree in Electronics or equivalent. Additional qualifications include: 3 to 5 years of experience

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    8 bids

    Need help with chairs and table assembly for an event. Must be available July 2-9!

    $144 (Avg Bid)
    Local
    $144 Avg Bid
    3 bids

    Hi, Need help to complete Assembly Language project. Additional details can be shared later

    $39 (Avg Bid)
    $39 Avg Bid
    6 bids

    furniture assembly

    $10 - $21
    $10 - $21
    0 bids

    Greetings, I've been an owner a co...server and I would like to upgrade it a bit. I basically want someone that has assembly knowledge and also is able to make a raid bigger. What I mean by that is. The current raid (as in party members) has capacity of 30 people. The developer will need to work with assembly and adjust it to 120 people instead of 30.

    $27 (Avg Bid)
    $27 Avg Bid
    2 bids

    assembly furniture

    $10 - $21
    $10 - $21
    0 bids

    ...Integration of all mechanism in the concept, Final CAD of assembly, 2D drawings of all components, high quality, realistic visualisations for the product and mechanism. I would be happy to receive advice regarding the design and construction of the product. Here there is an example I found online: [login to view URL] Thanks

    $458 (Avg Bid)
    $458 Avg Bid
    24 bids

    ...com/watch?v=GP8SeUd-xWE I will share more accurate sample in chat. Below are the things which you need to do. 1 - Modeling of all parts with texturing 2 - Animation/Making assembly video 3 - Rendering of complete viudeo 4 - Post production after effect Length of the video will be around 4 minute. Please don't bid if you can not produce good quality

    $287 (Avg Bid)
    $287 Avg Bid
    27 bids

    Hi Volodymyr R., I noticed your profile and would like to offer you my assembly language project. We can discuss any details over chat.

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    1 bids

    I need fast smal help to resolv...smal help to resolve problem in program writed in c# vs2017 Could not load file or assembly '[login to view URL], Version=5.0.505.0, Culture=neutral or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

    $25 (Avg Bid)
    $25 Avg Bid
    4 bids

    I need h...help about program writed in c# in vs2017 Could not load file or assembly '[login to view URL], Version=5.0.505.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. Program give that error. Work via temviewer

    $23 (Avg Bid)
    $23 Avg Bid
    22 bids

    The project is already done I need someone to make more comments in it

    $19 (Avg Bid)
    $19 Avg Bid
    4 bids

    You will write a simple assembly language program that performs a few arithmetic operations. This will require you to establish your programming environment and create the capability to assemble and execute the assembly programs. It must be in Visual Studio. Please use any sample 7 digit student ID number. Begin by splitting your student ID into two

    $126 (Avg Bid)
    $126 Avg Bid
    25 bids

    I have a number of p...5 x 11.5 cm 2) Rainbow Sensory Beads packaging label, printed in colour, sized to 9.5 x 11.5 cm 3) Warranty card, sized to 21 x 14 cm (double sided), in black and white 4) Assembly instructions card, sized to 21 x 14 cm (double sided), in colour I can send over the logo in .eps and high res photos that can be used. Thank you!

    $102 (Avg Bid)
    $102 Avg Bid
    37 bids

    ...your choice , by Catia) 20% 4) Cost Analysis (cost breakdown of designed and Standard parts) 20% 5) Technical Drawings ( 2D Assembly+BOM and 2 part drawings) 20% Total

    $229 (Avg Bid)
    $229 Avg Bid
    23 bids