Autocad plus jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    15,809 autocad plus jobs found, pricing in USD

    Hello, I need a Magento site's OS updated and the security of the site checked / reviewed. I also need a general review of the site.

    $111 (Avg Bid)
    $111 Avg Bid
    27 bids

    need some explainer vid with voice over(male) to explain our digital product.

    $177 (Avg Bid)
    $177 Avg Bid
    20 bids

    I need someone with ability to read and write in traditional Chinese or Japanese, plus basic knowledge in programming e.g PHP we'll be ideal. This is for long term project and remote is possible.

    $394 (Avg Bid)
    $394 Avg Bid
    12 bids

    I need someone with ability to read and read in traditional Chinese, plus basic knowledge in programming e.g PHP we'll be ideal. This is for long term project and remote is possible.

    $459 (Avg Bid)
    $459 Avg Bid
    12 bids

    full site plan with site statistics for commercial building drawn in autocad

    $110 (Avg Bid)
    $110 Avg Bid
    29 bids

    full site plan with site statistics for commercial building drawn in autocad

    $130 (Avg Bid)
    $130 Avg Bid
    34 bids

    Please look up the most recent 2016 or 2017 census data for each state and plug the population into column P.

    $42 (Avg Bid)
    $42 Avg Bid
    25 bids

    Design structures like buildings by using AutoCad and Revit and finished the projects in time or less than this time

    $149 (Avg Bid)
    $149 Avg Bid
    39 bids

    I have a part -- a piano key -- that pivots on a mechanical ball and spring detent that is built into the piano key. The detent is a divot that the spring-loaded ball rests in. It is supposed to provide resistance to being pressed. I need you to do stress test, and then evaluate possible points of failure, and recommend possible solutions (design changes, new materials). I don't have an...

    $148 (Avg Bid)
    $148 Avg Bid
    23 bids

    I have a part -- a piano key -- that pivots on a mechanical ball and spring detent that is built into the piano key. The detent is a divot that the spring-loaded ball rests in. It is supposed to provide resistance to being pressed. I need you to do stress test, and then evaluate possible points of failure, and recommend possible solutions (design changes, new materials). I don't have an...

    $154 (Avg Bid)
    $154 Avg Bid
    18 bids
    Solidworks / Autocad 5 days left
    VERIFIED

    Solidwork/ autocad design for a 3d model

    $16 (Avg Bid)
    $16 Avg Bid
    73 bids

    Cover sheet: contains map, title information, table of content. Will provide a sample Site plan: shows property lines and location of structure. Will provide basic plan First floor plan Second floor plan Roof plan 4 elevations 5 sections Window and door schedule Detail: window, stair, guardrail Structural General Notes: I will supply content Foundation plan Second floor framing plan Roof framing ...

    $466 (Avg Bid)
    $466 Avg Bid
    88 bids

    Create harness for cables from Field to Control [login to view URL] protection circuits if needed. ( 5-7 sensors for Pneumatic butterfly valves, Few level sensors and few temp sensors) Create harness for AC or DC cables for Analog sensors from field to control cabinet( single phase 5 pumps 1/2 - 1 HP centrifugal pumps Assist in sourcing Sensors and pumps for the application Rockwell Contrologix ...

    $219 (Avg Bid)
    $219 Avg Bid
    15 bids

    I need AutoCAD file for hobbit house. The model will be done from plastic, with some electric an water installation for kitchen and bathroom. I am open to any ideas. House must be between 30-40m2

    $184 (Avg Bid)
    $184 Avg Bid
    47 bids

    ...provided. Sales experience is a plus. You must be able to communicate in full, written English sentences. So that we can see your writing style, please introduce yourself in your introduction. Briefly describe any job you did earlier this year and what you liked best and least about it. You earn a fixed amount of $3 per hour, plus bonuses for any domains that

    $4 / hr (Avg Bid)
    $4 / hr Avg Bid
    4 bids
    Plus size fashion blog 3 days left
    VERIFIED

    I need some regular articles write up for my website blog. It should be about plus size fashion. Need it to be interesting, best with images in the article.

    $61 (Avg Bid)
    $61 Avg Bid
    46 bids

    Three AutoCAD 2018 files need to be recreated with watertight solids. The files consist of lines, SPlines or Blocks.

    $367 (Avg Bid)
    $367 Avg Bid
    28 bids

    Design both logo and template for my supplement. The logo is 'health active plus' super fat burner. Please get the template attached.

    $200 (Avg Bid)
    Guaranteed
    $200
    290 entries

    looking for someone to do my setting out plan of coordinates of hard materials used on my masterplan. 2 hours work £25 an hour. must be completed by Sunday.

    $105 (Avg Bid)
    $105 Avg Bid
    37 bids

    i am a dental profession and I have designed a tool which I need to design and print, I am in my initial phases and would need and initial consult and design for prototype(s) which can be printed or manufactured on a large scale.

    $161 (Avg Bid)
    NDA
    $161 Avg Bid
    14 bids

    ...get a Web-based admin system with 7 simple pages built, supporting 3 types of user and using the Paper Dashboard UI framework from Creative Tim (you tell me which version), plus 4 x one-page responsive web UIs - with a simple design but a notable requirement of a low-latency, live update from a database without the need to refresh the page (Websockets

    $1341 (Avg Bid)
    NDA
    $1341 Avg Bid
    44 bids

    I need someone that either today or tomorrow can draw lines over SPlines for 2 3D Autocad 2018 files (description of works will be given). It is a repetitive job (example attached: red lines to ouline the possition of columns/beams) Alternative: to convert the SPlines to simple lines and clean the files. A good laptop to open and easily work with the

    $149 (Avg Bid)
    $149 Avg Bid
    13 bids

    I have done hundreds of projects in autocad as draftsman like your rough paper drawing convert into cad file and as a Plumbing draftsman.

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    73 bids

    I need a 3D Modelling, AutoCAD expert for my current projects. If you have knowledge please bid. Details will be shared in message with the freelancers. Note:- Freelancer has must be great skill of Vray rendering.

    $150 (Avg Bid)
    $150 Avg Bid
    62 bids

    we want a virtual tutor who can teaching on autoCAD in 2days/week for 2hrs. in 6 months

    $18 (Avg Bid)
    $18 Avg Bid
    31 bids

    For a stand-alone vertical banner 2metres x 1metre, three images of different performances we are selling with title of shows on each image plus the name of our company outside of the images. Need to have different fonts for each show, one with a punk font, secomd we already selected (Henny Penny) third needs to be decided.

    $64 (Avg Bid)
    $64 Avg Bid
    27 bids

    I am trying to start my own business making parts for the electrical industry. These will be used to make life easier for electricians and help save their bodies. I have a few hand sketches and ideas for parts that will be used but I need your expertise including parts from manufactures into the drawing, and the parts that will be custom built. Also would like them to be able to export into nestin...

    $439 (Avg Bid)
    $439 Avg Bid
    97 bids

    We are Foodie copenhagen , we want to hire a social marketer , 5 hours daily , 7 days a week.

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    40 bids

    I have a 2BHK apartment, and I am looking for someone who can design the interiors in 3d Software.

    $106 (Avg Bid)
    $106 Avg Bid
    48 bids

    Need a Readymade cashback software plus responsive graphic

    $549 (Avg Bid)
    $549 Avg Bid
    15 bids
    Custom Pattern for Autocad 1 day left
    VERIFIED

    We need a custom Autocad pattern file that follows a custom geometry. The file supplied shall be a ".PAT" and be possible to be used in Autodesk Revit. Please look at the attached Autocad file that shows geometry that the pattern shall be based from. It is basically squares that overlap in 1 corner. It is allowed to make minor geometric adjustments

    $24 (Avg Bid)
    $24 Avg Bid
    13 bids

    ...understanding and demonstrated aptitude of design principles. • Extreme attention to detail and no-compromise attitude towards quality. • Proficency in AutoCAD, Photoshop, Illustrator, InDesign. 3dsMAX are a plus....

    $393 (Avg Bid)
    $393 Avg Bid
    25 bids

    ...instructions are provided. Sales experience is a plus. You must be able to communicate in full, written English sentences. So that we can see your writing style, please introduce yourself in your introduction and briefly describe any job you did earlier this year. You earn a fixed amount of $3 per hour, plus bonuses for any domains that you sell. The bonus

    $2 / hr (Avg Bid)
    $2 / hr Avg Bid
    5 bids

    Project Title: Isometric Drawing of Wire/Pipe in AutoCAD Software: AutoCAD Units: Inches What I have completed already: Isometric Drawing of Part To Be Completed By: 12:00AM- Eastern Time Zone: Negotiable Estimated Time to Complete: 1 Hour Details: -There are two wires/pipes which need to be drawn isometrically within the current part. -The wires

    $53 (Avg Bid)
    $53 Avg Bid
    7 bids

    building 400 social media profiles with brand name, plus content on cateogories schema

    $49 (Avg Bid)
    $49 Avg Bid
    5 bids

    I have a general idea of the image, colors to use and I have a name. I'll provide you with styles examples from existing icons. I'll select the freelancer based on the portfolio, so make sure you have a material icon in your, or send me a link to one of the material icons you created

    $85 (Avg Bid)
    $85 Avg Bid
    39 bids

    I have a construction plan in electronicale form and didn't have the software autocad to change the mesures.

    $22 (Avg Bid)
    $22 Avg Bid
    24 bids

    I have knowledge of basic autocad.

    $19 (Avg Bid)
    $19 Avg Bid
    8 bids

    We are currently running a Cisco 2851 with Cisco CME 8.5. In order to manage better voice mailboxes, international lines for call-conferencing we want to upgrade the system to CUCM on a Virtual Machine and integrate a software like MARS meetme Password to manage call conferencing remotely, auto-attendant music etc etc.. The current CME Config is fully available and there will be available an emp...

    $235 (Avg Bid)
    $235 Avg Bid
    8 bids

    The title says it all i need the best and i will check credentials. I need my advertisement to be showing first on Google and Google my business!

    $203 (Avg Bid)
    $203 Avg Bid
    20 bids

    We n...I want a mockup of the candidate profile page (will be on the powerpoint). That is all that is required, but if you are able to convert it to bootstrap (front-end), that's a plus. Please do not contact me unless you are willing to do it for the price listed and willing to do the mockup. The job will be permanent. The price is negotiable though.

    $177 (Avg Bid)
    $177 Avg Bid
    34 bids

    I would like to hire one virtual assistants (VA), part-time for now. I reside in Australia and conduct business in English, and sometimes in Portuguese and Spanish. This VA would work on both professional and personal matters for me. In order of priority, from ‘must have’ to ‘nice to have’, these are the key attributes of this professional: *outstanding proficiency in En...

    $7 / hr (Avg Bid)
    $7 / hr Avg Bid
    8 bids

    I am an Autistic piano technician and i have to carve out a part on CNC machine. I need someone to prepare the CAD portion.

    $91 (Avg Bid)
    $91 Avg Bid
    41 bids

    A product development company is looking for a virtual assistant. The primary skills are as ...Great technical writing skills - Must be available for at least 15 hrs/week - Must be open to voice and video calls - Technical/engineering background is a plus - Graphic and web design skills are a plus PM to discuss the details and schedule an interview.

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    15 bids

    I need a graphic made for a new segment we're doing. It's called "Make it with Mandy" I want the scissors to be incorporated as it is a craft/diy segment. I've attached the inspiration and colors I want used and also a rough mock up of the direction. I would prefer for it to have a crafty feel and handlettering is best!

    $33 (Avg Bid)
    $33 Avg Bid
    65 bids

    Require 2D Autocad Drawing measuring no more than 200 x 200 mm. The goal is to determine the maximum size Automobile that will fit in the garage. This task should take no more than 1 to 2 hours in billable time. 1 hour if your fast. 2 hours if your slow. Project due ASAP. This is a very fast and easy project if you know Autocad. Sale is 1 to 1

    $13 (Avg Bid)
    $13 Avg Bid
    38 bids

    Automate the block insert feature in Autocad and fixing the position of the block by giving distance and angle as input from the reference lines in the main drawing and finally mirror the inserted block. For positioning the block refer "Block insert left [login to view URL]" and "Block insert right [login to view URL]" images. The final drawing should be as per "f...

    $249 (Avg Bid)
    $249 Avg Bid
    31 bids

    I need a freelancer who could work as a part-time for my designs will be paid per project.

    $426 (Avg Bid)
    $426 Avg Bid
    4 bids

    I need (12) images. I have 6 articles of clothing. Jacket, sneaker, shades, top, jeans, and purse. Each image will have a front and back. SO, again, 12 images I know The substance painter is most efficient in dishing out photorealism. And it use iray render engine. Anyway I will attach 2 things to look at. One image will be a complete image after rendering. And the other will be a sketch of a pu...

    $430 (Avg Bid)
    $430 Avg Bid
    42 bids

    Im looking for an draftperson proficient in AutoCAD to make some changes to a house i am looking to build. I already know what i want to draw but a bit hard to convey on paper so i would like to meet up and sit down together to make the changes with the draftperson.

    $40 / hr (Avg Bid)
    Local
    $40 / hr Avg Bid
    1 bids