Circuit design freelancing jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    16,102 circuit design freelancing jobs found, pricing in USD

    We are students looking for a freelancer with knowledge in ARM and programming. The project uses...and programming. The project uses ARM cortex m0+ (FRDM KL25Z) and sensors. The deadline is 28th November as the submission is on that date. We will be requiring the code and circuit diagram with connections for the project. The block diagram is attached.

    $251 (Avg Bid)
    $251 Avg Bid
    6 bids

    Ask me for more details. We are a new model of freelancing agency that is positioned to be able to do anything. We hire out other agencies to complete most of the complex things like app development, and we hire freelancers to do simpler things like data entry. There is nothing we cannot do, and we take a 20% cut from every project. This company is

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    12 bids

    Ask me for more details. We are a new model of freelancing agency that is positioned to be able to do anything. We hire out other agencies to complete most of the complex things like app development, and we hire freelancers to do simpler things like data entry. There is nothing we cannot do, and we take a 20% cut from every project. This company is

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    9 bids
    Speed Queen and Arduino 6 days left
    VERIFIED

    I need to activate a speed queen washing machine with a esp8266EX plate, and not with the proprietary brand card reader. I need to kn...washing machine with a esp8266EX plate, and not with the proprietary brand card reader. I need to know the way in which the washing machine activates the washing cycles and the circuit that must be made with esp8266EX

    $275 (Avg Bid)
    $275 Avg Bid
    11 bids

    Simple project, that basically should detail the observed waveforms and max frequency of given code.

    $30 (Avg Bid)
    $30 Avg Bid
    5 bids

    I want to get Embedded C coding done for electronics circuit hardware for micro controllers. PIC and ATMega controllers are to be programmed

    $108 (Avg Bid)
    $108 Avg Bid
    12 bids

    We are a Australi...sending Digital Data to a DAC setup and amplified via Mosfets. Digital Data will be implemented on a Xilinx FPGA. Trapezoidal waveform needs to be written in VHDL so that circuit and Code simulation can be done in Tina software. An explanation of the VHDL code to be supplied so that code can be changed at any time in the future.

    $101 (Avg Bid)
    $101 Avg Bid
    2 bids
    Iron man motorized face plate 5 days left
    VERIFIED

    ...would like to design a motorized Iron Man Faceplate system using two Hitec metal gear servo that uses between 4.8 to 6v. It will use an Arduino Uno w/ Adafruit "Music Maker" MP3 Shield for Arduino w/3W Stereo Amp - v1.0 for sound effects as well as to control the leds eyes in the faceplate . This individual will need to design the circuit layout in detail

    $220 (Avg Bid)
    $220 Avg Bid
    4 bids

    Based on pcb photo make Express pcb file of slightly modified circuit of mosquito racket circuit

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    Need only schematic design and BOM file using Altium Designer. I want to make POE circuit design for Raspberry Pi 3. It must be capable of supplying over 70W power for the device to be controlled. Relevant freelancer who can handle this project smoothly will be awarded PCB design by next project. Thanks.

    $80 (Avg Bid)
    $80 Avg Bid
    2 bids

    Hi there Are you an architect superstar / CAD expert / architectural designer / 3D renderer / 3D modelling pro? Then, I'd really like to talk to you, as I am looking to meet great archi-freelancers for future projects. Let's have an aprox. 45 minute conversation, that includes: > What kind of tasks do you like to do the most? > What is your absolute expertise? > What outsour...

    $29 (Avg Bid)
    $29 Avg Bid
    70 bids

    I need a circuitboard design for LED lights being triggered by a motion sensor and a photo receptor.

    $470 (Avg Bid)
    $470 Avg Bid
    28 bids

    ...project to the some point, I successfully set up the blocks and I got a certain results. Yet, it's needed to develop a transfer functions for each of the used blocks (XOR circuit, Filter, VCO - voltage control oscillator) in order to achieve the best results. Anyway, the structure I developed is not the best one, maybe there are some elements that are

    $143 (Avg Bid)
    $143 Avg Bid
    10 bids

    I'm looking for recruiter who will help me find one employee living in Europe. Informal work, work from home, this is something like freelancing. Good candidates are maternity girls seeking an additional source of cash income.

    $100 (Avg Bid)
    $100 Avg Bid
    1 bids

    ...that are skilled in various things like electric circuit design and Chemical Engineering software such as Aspen Plus V8.8 . I will have some Aspen projects here and there as well as other various projects I'm working on. I like to hire and test out several different engineers on a preliminary design test first to see if their skill set is up to par

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    ...novice are advised to please stay away from this fray. Native Writers from AUS, UK, USA, CANADA, KENYA, NIGERIA etc. are most welcome to place bids here to boost their freelancing careers on a high note. Want only 100% plagiarism free and grammatically correct article that is easy to read --- just that; nothing much. The task will be of writing product

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    8 bids

    Pic micro controller to measure 3 phase voltage and current measurement & control the relays based on current readings

    $14 / hr (Avg Bid)
    $14 / hr Avg Bid
    11 bids

    Design a bias network using Cadence Spectre (or other CAD software as longs as I can easily follow your steps). Must generate a 10uA current with gm = 100uS that cannot vary by more than +-10% over -40 C to 130 C or supply variations of +-10% with a nominal 1.8V supply. You come up with the idea of using a constant gm bias circuit to bias the amplifier

    $60 (Avg Bid)
    $60 Avg Bid
    3 bids
    Modify phone circuit 3 days left
    VERIFIED

    We want to make some modifications to a phone circuit so that when the headphones are plugged in the front microphone will still work rather than be disabled Thanks

    $1048 (Avg Bid)
    $1048 Avg Bid
    9 bids

    ...products for manufacturing industry. Our products include hardware and software and smart device apps. We are currently seeking a part/full time person for our marketing freelancing positions. The job would be hourly based for 1-2 months and if it goes well can be extended for a longer time. The duties will include: - Manage social media posts across

    $6 / hr (Avg Bid)
    $6 / hr Avg Bid
    32 bids
    Web Developer 3 days left
    VERIFIED

    I am looking for a web developer that would be interested in doing some freelancing work for one of my projects. Tasks involved would be : 1. Developing Front-End like the Unimus tool ( [login to view URL] ) 2. Basic understanding of API 3. Basic understanding of taking data from databases ( sql or other )

    $327 (Avg Bid)
    $327 Avg Bid
    16 bids

    I Want to make a Smart UPS Circuit simulation + PCB hardware which can pass EMC test • you have to give me full details other circuits why not recommended and why your circuit recommended. • Must show digital current and voltage usage and total voltage and total current • Can be modified by battery size • Explanation Supporting Material Comparison

    $186 (Avg Bid)
    $186 Avg Bid
    5 bids

    Design of driver circuit for LED's used in domestic and commercial lighting and documentation, more details via inbox contact me

    $18 (Avg Bid)
    $18 Avg Bid
    2 bids
    Custom Touchpad 2 days left

    I need a small touchpad (2cm X 2cm max.) for using on PC. (USB or wireless) We may use a custom printed circuit board (PCB) design and layout or even use a Blackberry trackpad for this purpose. [login to view URL]:[login to view URL] [login to view URL]

    $144 (Avg Bid)
    $144 Avg Bid
    6 bids

    Hi Dave, this is a project for writing a piece of content for our freelancing project

    $330 (Avg Bid)
    $330 Avg Bid
    1 bids
    Check hardware schematic 2 days left
    VERIFIED

    Hello, I have made the circuit attached. It is basically, a wattmeter with WiFi (ESP8266). It has been designed to be connected to an European plug (230VAC). -This wattmeter can turn on/off the current flow. -The ESP8266 will be programmed using a USB to TTL adapter. -It has 2 ways of measure the current (using integrated ADC in ESP8266, or using

    $162 (Avg Bid)
    $162 Avg Bid
    27 bids

    i want the smps of 12V 15Amps current rating with circuit diagram explanation, pcb design layout and current calculations,designing

    $186 (Avg Bid)
    $186 Avg Bid
    3 bids
    Circuit design 2 days left

    I want the one who can design the combined modules in a single circuit like gprs tracking,Bluetooth,charging module,camera module with storage to sd card,etc.

    $154 (Avg Bid)
    $154 Avg Bid
    7 bids

    Electronic PCD design for switch with arm/disarm and activate function and RF remote triggering to be used with batteries. I want a design for a PCD board that can run a motor/solenoid when a RF remote button is pushed. The RF remote must have two buttons, one that arms/disarm the device, and a second that triggers the motor/solenoid. The motor/solenoid

    $296 (Avg Bid)
    $296 Avg Bid
    17 bids

    ...professional content writer to provide 100% unique and self-written 7 articles a day each contains 500+ words for different project keywords, project which is related to freelancing, getting free from All articles must be self-written, in an adequately correct English language and must be PERSUASIVE in nature that pushes the reader to perform the action

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    45 bids

    I am working again on freelancer. My work visa category has changed and I'm freelancing again. If you require my services I would be happy to help.

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    1 bids
    Wearable IoT bracelate 1 day left
    VERIFIED

    We need a design and a prototype for a flexible bracelet which contains: - an a electronic circuit - battery - micro usb charger please send me the refrences

    $800 (Avg Bid)
    $800 Avg Bid
    21 bids

    ...data for an unfamiliar digital design problem.‎ • The application of appropriate design methods to the VHDL design.‎ • The selection appropriate analysis tools, VHDL model abstraction levels and simulation test vectors.‎ • Ability to implement your design solution on a commercially available digital Computer Aided Design (CAD) tool.&...

    $55 (Avg Bid)
    $55 Avg Bid
    7 bids

    Hi there, You need to create a PPT on freelancing for begginers. Needed today urgently. PPT should cover 3 to 4 freelancing portals including Freelancer and you know the rest of you are the right person for this work. Message me with

    $22 (Avg Bid)
    $22 Avg Bid
    24 bids
    PCB design 22 hours left

    I want a PCB board to be designed from the circuit diagram.

    $15 (Avg Bid)
    $15 Avg Bid
    49 bids
    Radar Project 19 hours left

    Help with circuit analysis of a home made radar.

    $89 (Avg Bid)
    $89 Avg Bid
    11 bids

    ...founder of Heaven Solar Pvt. Ltd. I want to make MPPT solar charge controller. I am looking for an expert who can design hardware and software for the 100-watt solar charge controller. you will have to send full electrical circuit design/ code with calculations and also need to send me a working prototype of it. Input side: 100 watt solar panel Output

    $519 (Avg Bid)
    $519 Avg Bid
    16 bids
    Academic freelancing scripts 19 hours left
    VERIFIED

    Looking for software developer who has done this work before, PHP script for Academic site should be responsive and error free, the scripts should have the following Separate Admin/ Writer & Client web sites linked up Manage orders : deadlines, payments etc Hire , promote, and fire writers and editors Manage administrators, editors, writers, and clients Seamlessly, links Paypal with Cl...

    $155 (Avg Bid)
    $155 Avg Bid
    4 bids

    We have a freelancing website providing value for freelancers and business owners in MENA. That's the website >> [login to view URL] we need more customization for the website, 1- we need to improved UX of the website (that's include redesign home page, all pages of the website, User interface, easy of using and so on). 2- we need to increase security

    $462 (Avg Bid)
    $462 Avg Bid
    29 bids

    Am asking you to hire me, am new to freelancing. i can work on your deadlines. I have skills in Data entry, Software Development, Software Programming, Web Design and Ms Office.

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    1 bids

    Required a person to design a circuit for a machine which operates using weight balance and computer. Interested person kindly contact for other details. Vaibhav-[Removed by Freelancer.com Admin] Location-Agra or Lucknow

    $349 (Avg Bid)
    $349 Avg Bid
    8 bids

    ...) work description : ->design the circuit, design the code (using arduino board?), suggest the parts to use ->note : you only have to work on the circuit design and code, i will buy / make the parts (shape of the dog, roof/box for the device). ->test it until it works well on your side ->send me the schematic of the circuit, and the code to...

    $220 (Avg Bid)
    $220 Avg Bid
    8 bids

    You will develop a CAD tool that can read in the “logical RAMs” in each circuit of a benchmark set, and output a set of “physical RAMs” that can implement the logical RAMs for each circuit. Your tool should be able to target FPGAs with up to 3 types of physical RAMs (which may be 3 different block RAMs, or 2 block RAMs and “LUTRAM” created by using

    $21 - $172
    $21 - $172
    0 bids

    You will develop a CAD tool that can read in the “logical RAMs” in each circuit of a benchmark set, and output a set of “physical RAMs” that can implement the logical RAMs for each circuit. Your tool should be able to target FPGAs with up to 3 types of physical RAMs (which may be 3 different block RAMs, or 2 block RAMs and “LUTRAM” created by using

    $405 (Avg Bid)
    $405 Avg Bid
    3 bids

    We have a circuit design and layout for an audio mixer controlled via Bluetooth. We need an electronics circuit design engineer to take over the project and finish integrating some peripherals and fix some cross-talk issues. Design and Layout is in ORCAD. Location is Glasgow. Some firmware skills preferred too.

    $31 / hr (Avg Bid)
    Local
    $31 / hr Avg Bid
    3 bids

    LOOKING FOR FREELANCING DESIGNERS AND FULL TIME DESIGNERS FOR MENS AND WOMEN'S WEAR BRAND CHRONIUS BESPOKE CLOTHING OS KNOW FOR WEDDING WEAR SO WE LOOKING PEOPLE WHO HAVE KNOWLEDGE OF DESIGNING FIELD AND CLIENT HANDLING FIELD

    $363 (Avg Bid)
    $363 Avg Bid
    15 bids

    VISIO drawing of an electrical circuit

    $21 (Avg Bid)
    $21 Avg Bid
    10 bids

    on the hardware side I need to design a circuit that can read 2 rfid readers with weigand reading format 26 and 2 ibutton readers (1-wire), this based on an esp8266 board, I am currently working with the wemos d1 mini pro. The plate (or shield) that must be designed to handle 2 relays, in order to be able to close doors. on the software side On esp8266

    $184 (Avg Bid)
    $184 Avg Bid
    11 bids