Control stepper motor labview jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    9,987 control stepper motor labview jobs found, pricing in USD
    Arduino Code for Motor 6 days left
    VERIFIED

    I would like an Arduino code to control a brushless dc motor with hall effect sensors

    $36 (Avg Bid)
    $36 Avg Bid
    6 bids
    Arduino Code 6 days left
    VERIFIED

    I would like an Arduino code for that uses a hall effect sensors to control a brushless DC motor.

    $197 (Avg Bid)
    $197 Avg Bid
    9 bids

    I need a LabVied VI that can do realtime LTC Timecode deconding and encoding. this will be run on an MyRIO unit so should either be written for this or easily ported from another DAQ system. Ideally it would utilise the RT Module and FPGA Module and operate with as little overhead as possible. The VI should be able the, in terms of the decoder, output a string or timestamp with the current real ti...

    $409 (Avg Bid)
    $409 Avg Bid
    2 bids

    US ONLY I need a Full design (Turn key) of a Tiny Permanent Magnet Generator and the Tiny Motor that will be running this generator. The RPM and the voltage and current out put will be disclosed later. I need all of the build documents such as the schematic/drawing, calculations and the BOM files associated with this design. I'm Looking for a Freelancer

    $453 (Avg Bid)
    $453 Avg Bid
    2 bids

    Hello, I am looking for a fun (but not silly) cartoon image of a car that has a brain for a motor (the brain might have some flames coming off of it) and the person doing the repair is a doctor (male and female) with dark hair (also one version that is blonde male). Please see the 2 images that I created as samples.

    $45 (Avg Bid)
    $45
    5 entries

    I have keywords and topics for the best SEO article writers, as I'm looking to hire more than one. It is for motor vehicle related accidents only in the Southern California, USA area. For more details other than the fact that I need the article to be at least 2000 words, please contact me as soon as possible as I need an article written within a few

    $278 (Avg Bid)
    $278 Avg Bid
    51 bids

    Hi did you design the NetKnight app? Hoel was designing a Bluetooth board for me to control a motor and I believe he worked with you to design the apps for Android and Apple. Hoel has not responded to my emails for over 2 months. I am having another person design the board. Since you already have the apps programmed would you be interested in working

    $1000 (Avg Bid)
    $1000 Avg Bid
    1 bids
    Rental Site Categories wanted 3 days left
    VERIFIED

    we have a website dedicated to RENTALS ... ie ... like a AirBNB and also any /ALL items such as autos, trucks, hotels, motels, Rooms, plant and equipment SURFBOARDS Motor Bikes Bicycles etc etc etc etc You need a strong dedication to this project and the report and design ideas for the site ... check out [login to view URL] as we are now looking to advance

    $51 (Avg Bid)
    $51 Avg Bid
    6 bids
    Trophy icon Rental Site 3 days left

    we have a website dedicated to RENTALS ... ie ... like a AirBNB and also any /ALL items such as autos, trucks, hotels, motels, Rooms, plant and equipment SURFBOARDS Motor Bikes Bicycles etc etc etc etc You need a strong dedication to this project and the report and design ideas for the site ... check out [login to view URL] as we are now looking to

    $21 (Avg Bid)
    $21
    5 entries

    I would like to build the Simple & Easy Gate admission turnstile for sma...this; People scan the QR code at the gate. Scanner capture the QR code and verify it on the database online. Once it is verified, the gate opens. (Raspberry Pi drive the motor) After a while, the gate close. I am looking for an engineer who can build such software+hardware.

    $559 (Avg Bid)
    $559 Avg Bid
    34 bids
    Trophy icon Company Name and logo required 2 days left

    ...20L Jerry can or container in 3 minutes 7lts per minute Target customers Jet skis, Wave runners, Boats, Tenders and Outboards, Motor bikes, Quad Bikes, Lawn mowers, Generators, Stationary engines, ATV, Go carts, Motor Racing, Cars, Tractor, Camping, 4 x 4 Fluids include Petrol, Diesel, Kerosene, Water, Light oils, Cooking oils some Chemicals

    $136 (Avg Bid)
    Guaranteed
    $136
    78 entries

    ...protect the car from water damage? 5. What are the best RC Cars for snow? 6. Should you also cover your battery? 7. Will a Brushed Motor Help in the snow? 8. What is the difference between a brushed and brushless motor? 9. Will an RC Truck handle the snow better than a car?] Tone: > Entertaining & Informative BUT Actionable Use first and second person:

    $41 (Avg Bid)
    $41 Avg Bid
    23 bids

    Design a motor controller based on the light level on a phototransistor. When illumination is very high, the motor will be stopped while 6 volts will be applied to the motor under low light conditions. You will need to measure (characterize) the properties of a phototransistor under both light and dark conditions in order to design the circuit and calculate

    $169 (Avg Bid)
    $169 Avg Bid
    5 bids

    ...used as a voltage controlled oscillator (VCO) that will generate a tone at a frequency of 500 Hz (+/-20%) at zero light level and 1500 Hz at full light (0 volts applied to motor). A small speaker or headset can be used to make the output audible. One possible circuit is provided in the project data sheets folder ([login to view URL]) which can be used as a

    $161 (Avg Bid)
    $161 Avg Bid
    4 bids

    Hello dear this is for the labview project as discussed :)

    $45 (Avg Bid)
    $45 Avg Bid
    1 bids
    Magnetic Motor 1 day left

    ...DUAL - Action Piston Magnetic Force Motor & Method Looking for a grant writer in the field of energy grants. Proto types have been built an are a working model. Proto type check out by G.V S.U. Designs an built by C & R TOOL& Die. Looking for a grant to built the finish magnetic motor the clock design motor. The proto type can be view on the internet

    $4083 (Avg Bid)
    $4083 Avg Bid
    4 bids

    design a motor controller based on the light level on a phototransistor. When illumination is very high, the motor will be stopped while 6 volts will be applied to the motor under low light conditions. You will need to measure (characterize) the properties of a phototransistor under both light and dark conditions in order to design the circuit and calculate

    $8 / hr (Avg Bid)
    $8 / hr Avg Bid
    9 bids

    In the final project, students will design a motor controller based on the light level on a phototransistor. When illumination is very high, the motor will be stopped while 6 volts will be applied to the motor under low light conditions. You will need to measure (characterize) the properties of a phototransistor under both light and dark conditions

    $80 (Avg Bid)
    $80 Avg Bid
    1 bids

    In the final project, students will design a motor controller based on the light level on a phototransistor. When illumination is very high, the motor will be stopped while 6 volts will be applied to the motor under low light conditions. You will need to measure (characterize) the properties of a phototransistor under both light and dark conditions

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    1 bids

    i have a three motors by different powers as the following : 1- 11 KW , 480 V , 60 Hz , 3 PH , 3500 rpm 2- 15 KW , 480 V , 60 Hz , 3 PH , 3500 rpm 3- 45 KW , 480 V , 60 Hz , 3 PH , 3500 rpm actually i need an electrical engineer to make a correct selection for MCCB, contactor and overload for each case . he should make calculation paper . provide all theory which he used . official report to be a...

    $32 (Avg Bid)
    $32 Avg Bid
    2 bids

    We need to build one electronic motor with battery and a command button.

    $502 (Avg Bid)
    $502 Avg Bid
    20 bids

    ...manufacturers : How long does it take to charge the scooters? How many kilometers or miles before the scooter runs out of battery ? What is the expected life time of the scooter motor and battery ? How long until the scooter can no longer be used ? What is the maximum weight the scooter can support? How are the warranties handled ? If the model is defective

    $120 (Avg Bid)
    $120 Avg Bid
    13 bids

    Creating a device that increases the load on arm. The inputs consist of a variable tension resistor and a flex sensor and the output is a DC motor. Need a program to increase and decrease speed of motor depending on angle and tension of resistor. Exact details and more specific information will be given later

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    26 bids

    Small kitchen gadget, powered by recharged USB elec. Has a small motor.

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    27 bids

    would it be possible to spend 2 hours looking at the project, and perhaps make a few suggestions, perhaps a logo, or so...few suggestions, perhaps a logo, or some branding suggestions. My ultimate goal is to get someone to create a shopify shop for me. so that I can sell about 8 versions of my motor product. Ill send you a PDF describing the product.

    $52 (Avg Bid)
    $52 Avg Bid
    1 bids

    the robot must be built with the following parts, 1. stm32l476vg discovery board 2. pololu 1207 stepper motor( only 2 motor) 3. HC 04 ultrasonic sensors 4. pololu 2459 reflectance sensor robot must be within 8"x8" size. the robot will do the following: maze navigation: The walls of the maze will be made out of 2 by 4s. • The walls will be placed

    $411 (Avg Bid)
    $411 Avg Bid
    3 bids

    We need to basically the website model is prepared. Any to have professional contents so. You'll be given the business motor of the project. one more thing is we need to have some blogs around the same content. The blohs that we are looking are you within 500 words and will be needing 10 to 20 of the same type of blogs.

    $53 (Avg Bid)
    $53 Avg Bid
    14 bids

    ...parts in each product page) ------ 1” Mini Blind Components ------ 2” Horizontal ------ Arch Elegance Foam ------ Drapery Systems ------ Illusion shades ------ Machinery ------ Motor Systems ------ Packing Material ------ Roller Shade Facias Systems ------ Roller Shades ------ Vertical Blinds - Ideas (Blog of ideas and news) - Contact Competitors: - vertilux

    $158 (Avg Bid)
    $158 Avg Bid
    33 bids

    ...shelves each shelve 8.5" high x 6.25" deep x 48" wide Each shelve will need to hols about 38lb in weight. Shelves are driven round with a motor and chain drive so only 3 shelves are on show at any one time. Motor should move are a slow speed so that all shelves move in a full rotation in 30-40 seconds. Rocker Switch to be used to rotate the shelves

    $130 (Avg Bid)
    NDA
    $130 Avg Bid
    30 bids

    ...someone to create a fan page on facebook to promote MCA (motor club of america) **would like to know if someone knows how to advertise on social media without using any money!! *** **Needs to know how to set a fan page up on facebook **needs to know how to do ads ** needs to know about motor club of america and what it is** (i’m not explaining it)

    $29 (Avg Bid)
    $29 Avg Bid
    5 bids

    Someone to post ads on social media and make me a fan page for motor club of america so i can start promoting it!

    $79 (Avg Bid)
    $79 Avg Bid
    8 bids

    We have a function that performs several sequential sets of calculations. Profiling the function, it was identified that a significative amount of time the sets of calculations were accessing mysql data, so a parallel version of that function was developed based on POSIX processes rather than in threads. We would like to improve and optimize the existing parallel function, so we are looking for s...

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    2 bids

    ...covers Spinal Biomechanics, Sensory Motor loop that holds us in the Strain, how to assess Facet joints locked open and locked close and find the bony knot in the lamina groove ( fourth layer muscles) that lock the spinal joints,the five most important laws that govern the body. The first class covers the laws, sensory motor loop and how to change it, first

    $122 (Avg Bid)
    $122 Avg Bid
    5 bids

    ...on the filament width sensor (PID diameter control). Extrusion line example video: [login to view URL] Work: 1. Program 3 stepper motors wit PID: A) The first stepper to pull the filament with a consistent diameter based on the diameter gauge meter. B) The second stepper to wind the filament on the spool with a constant

    $334 (Avg Bid)
    $334 Avg Bid
    12 bids
    $38 Avg Bid
    3 bids

    Aim of the project is to use PWM to vary the speed of a DC motor and the input capture to measure the speed. The requirements of the system, in order of priority, are: 1. The system should be able to vary the speed of the motor using PWM. 2. Suggest a method to set the speed of the motor, with at least five different speeds (with no load). For example

    $182 (Avg Bid)
    $182 Avg Bid
    21 bids

    We need a NI LabView expert to develop a Plug and Play Instrument Drivers. It will be based on FTDI D2XX library (a full functions VI library is available) and a full specification will be provided.

    $587 (Avg Bid)
    $587 Avg Bid
    8 bids

    I need someone to analyze and write about an existing result about common mode voltage in three phase neutral point clamp Inverter for induction motor. I will send the result for the chosen bidder.

    $28 (Avg Bid)
    $28 Avg Bid
    5 bids
    $47 Avg Bid
    5 bids

    ...Chrome browser. The main software can still run on the W10 PC. Update: We have a Keyence-LR-TB5000CL laser Connected to a PR5714 display with 4-20ma output connected to a Control By Web X-418 [login to view URL] [login to view URL] https://www

    $255 (Avg Bid)
    $255 Avg Bid
    20 bids

    We are looking for a dedicated writer who can deliver at-least 2500 words everyday. Please note: This is a long-term project and bulk works are provided. Niche - Motor Insurance. Interested candidates, kindly apply

    $82 (Avg Bid)
    $82 Avg Bid
    14 bids

    I need to control servo motor remotely using xbee and arduino

    $27 (Avg Bid)
    $27 Avg Bid
    9 bids

    Hi I need some help/training with 5G MIMO Matlab, DSP, prototyping in LabVIEW please let me know if we can work on it, send me your contact details , we can talk about it. Thanks

    $195 (Avg Bid)
    $195 Avg Bid
    7 bids

    I need a Python project developed to run...Python project developed to run on a Raspberry Pi. The program will run, then test a motor. The motor will connect to a fixture. The operator will start the program by a touchscreen gui. The program will execute and display a pass/fail at the end. Data for the motor will be logged and recorded to a file.

    $1230 (Avg Bid)
    $1230 Avg Bid
    33 bids

    Hi there! I’m looking for some witty one-line writers who can understand motorbikes, travel and Indian humour. These one-liners would be reproduced on our products so they would have to be unique.

    $76 (Avg Bid)
    $76 Avg Bid
    15 bids

    You will receive: -3D concept file (alre...-profiles and material description in pdf (afterwards) What we want from you: - Solidworks or proingeneer file - manufacturing drawings for metal parts (frames, axis, and motor holder) - Dwg file We have allot of this kind of work. We are looking to get some for long term work. Please provide a references.

    $28 (Avg Bid)
    $28 Avg Bid
    75 bids

    ...accident on 10/15/18 involved, where I was hit and had property and medical injury from being hit by the company semi truck after the driver was neglient in operating the truck motor vehicle. The driver never reported the accident to his employer/insurance carrier, and it took them a month to accept fault and place claim, after a bank and forth arguing with

    $103 (Avg Bid)
    $103 Avg Bid
    10 bids

    I would like to find someone to design me a logo for a new company start up. The business will operate ...would like to find someone to design me a logo for a new company start up. The business will operate as a Finance Brokerage within the Motor Finance sector. I would like the Design to be closely linked with Motor Finance and Vehicle funding.

    $89 (Avg Bid)
    $89 Avg Bid
    59 bids

    My project is on protection agaist water availability then the on off control of starter of the motor.

    $7 / hr (Avg Bid)
    $7 / hr Avg Bid
    4 bids

    We need a 10 pages report on Washing Machine Induction Motor Drive. The report should be plagiarism free. It must include all the references and some nice pictures. For reference, i have attached a presentation of a different topic in order to understand what to include in the report. Also the link below would be helpful.... [login to view URL]

    $71 (Avg Bid)
    $71 Avg Bid
    12 bids