Embedded software jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    8,382 embedded software jobs found, pricing in USD

    We are looking for a freelancer with hands-on experience on QT embedded software development. As the first stage of the project we want to see a demo firmware made. We would prefer to use Raspberry Pi for our development. When we switch ON the unit, a logo animation will be played on boot up. Followed by the following buttons shown on the left side

    $919 (Avg Bid)
    $919 Avg Bid
    10 bids

    We are looking for a freelancer with hands-on experience on QT embedded software development. As the first stage of the project we want to see a demo firmware made. We would prefer to use Raspberry Pi for our development. When we switch ON the unit, a logo animation will be played on boot up. Followed by the following buttons shown on the left side

    $57 - $226
    $57 - $226
    0 bids

    We are looking for a freelancer with hands-on experience on QT embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers (Modbus) 3) 6 Stepper Motors with 24 volts DC drivers (Modbus) 4) 1 Analog input/output

    $998 (Avg Bid)
    $998 Avg Bid
    8 bids

    We are looking for a freelancer with hands-on experience on QT embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers (Modbus) 3) 6 Stepper Motors with 24 volts DC drivers (Modbus) 4) 1 Analog input/output

    $565 - $1018
    $565 - $1018
    0 bids

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. PLEASE NOTE: The look and feel of the touch screen is very important for our project. We are looking for similar effects in the touch screen as given in the video below: (Check from 2:40 to 3:20) [login to view URL]

    $1018 (Avg Bid)
    $1018 Avg Bid
    12 bids

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. PLEASE NOTE: The look and feel of the touch screen is very important for our project. We are looking for similar effects in the touch screen as given in the video below: (Check from 2:40 to 3:20) [login to view URL]

    $745 (Avg Bid)
    $745 Avg Bid
    9 bids

    Hello, I have an iptv server and would like to develop a vpn system built into the clients' rows directly. Do you develop this service? Att: Campos

    $684 (Avg Bid)
    $684 Avg Bid
    3 bids

    Industrial/UI/UX Designers who have HANDS ON experience in designing graphic LCD design. Application is an industrial battery charger used by forklift and airport equipment operator. Use of icons where possible is desirable. Products can be installed worldwide so minimal use of text is preferred, though we offer language support (in 4-5 languages including simplified Chinese). Product will be ...

    $486 (Avg Bid)
    $486 Avg Bid
    12 bids

    Industrial/UI/UX Designers who have HANDS ON experience in designing graphic LCD design. Application is an industrial battery charger used by forklift and airport equipment operator. Use of icons where possible is desirable. Products can be installed worldwide so minimal use of text is preferred, though we offer language support (in 4-5 languages including simplified Chinese). Product will be ...

    $411 (Avg Bid)
    $411 Avg Bid
    17 bids

    hi I want to make a microntroller based system to measure BP

    $140 (Avg Bid)
    $140 Avg Bid
    11 bids

    Escapia is vacation rental software that partners with Homeaway for the property listings. We need the Escapia software API set up, so the rentals, searching, availability is all embedded into the Wordpress site. The site is built and designed we need the data and content to call on the information in Escapia to populate on the Wordpress site. SCOPE

    $615 (Avg Bid)
    $615 Avg Bid
    14 bids

    Multi threading program required for microcontroller c1294 device for integration with existing program.

    $45 (Avg Bid)
    $45 Avg Bid
    4 bids

    The task to integrate 'swupdate' framework with our embedded project was started but is unfinished because my freelancer.com developer disappeared without further notice. I need a little help from an experienced embedded linux (and experienced swupdate) engineer to finish this task.

    $555 (Avg Bid)
    $555 Avg Bid
    7 bids

    ...of this document is to define the requirements for a new firmware development based on Microchip MPLAB Harmony platform. 2. TFT CONTROLLER HARDWARE TFT controller is an embedded hardware design based on PIC32 microcontroller. This are the main elements to be controlled by firmware: • PIC32MX460F512L microcontroller • S25FL064L 64Mbit SPI Flash memory

    $8895 (Avg Bid)
    $8895 Avg Bid
    34 bids

    ...will require an overhead mounting of some type that will facilitate the filming of a piano keyboard from above. After filming, editing will include on-screen graphics and embedded windows to show music notes and animations, all of which need to be coordinated with the filmed content. The final length of each video will range from five to ten minutes

    $55 / hr (Avg Bid)
    Local
    $55 / hr Avg Bid
    1 bids

    Create code for a "refer a friend" html form / webpage and the write code to handle the refer a friend form. Add the information to the Mailchimp List and send the new "friend" an email with the link to the promo page.

    $114 (Avg Bid)
    $114 Avg Bid
    13 bids

    The application (APP) will be responsible for utilizing a floor indicator in the elevator and will be able to display images on an LCD/TFT screen. Furthermore, the app will handle the playback of MP3 files in order to make the Floor Announcement also. The APP will be install on a board running Android KITKAT 4.4 and should be able to handle low level Hardware modules such as GPIO,USB,SDIO, as well...

    $1008 (Avg Bid)
    $1008 Avg Bid
    21 bids

    Looking for a qualified Electrical Engineer or Computer Engineer. Must have experience in Embedded Hardware development, debugging and fault finding and using test instruments. Must also have experience in how Embedded Software development works and collaborate with developers of PCB and / or firmware to load, debug and run sniffing and probes on hardware

    $37 / hr (Avg Bid)
    $37 / hr Avg Bid
    11 bids

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers (Modbus) 3) 6 Stepper Motors with 24 volts DC drivers (Modbus) 4) 1 Analog

    $1475 (Avg Bid)
    $1475 Avg Bid
    18 bids

    I need a key generating program with which I can license a VB6 project. The project will use the MAC Address of a network interface + HDD Serial Number. With these 2 an Ash code can be generated with which the license key can be generated. The key generator should be able to decypt the MAC Address of the NIC and the HDD Serial number when the Ash code is entered into it before the license key is...

    $30 (Avg Bid)
    $30 Avg Bid
    2 bids

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output

    $807 (Avg Bid)
    $807 Avg Bid
    7 bids

    We are looking for a freelancer with hands-on experience on QT Cross-platform embedded software development. We would be using Raspberry Pi for our development. Firmware will control the following: 1) 7 inch capacitive touch screen 2) 3 Servo Motors with 230 volts AC drivers 3) 6 Stepper Motors with 24 volts DC drivers 4) 1 Analog input/output

    $920 (Avg Bid)
    $920 Avg Bid
    3 bids

    Multiple slaves (BMD 350 -custom board ) should be connected with one central module( NRF52832 - Holy IoT). Self test should be incorporated. eg. slave 1 , slave 2 , slave 3 ... slave 12 will be coded to the custom boards. Send command will find all slaves.

    $570 (Avg Bid)
    $570 Avg Bid
    14 bids

    ...never cuts out along the same exact route that I take but lately it has been cutting out every couple minutes. And I have full strength on my signal from cell carrier and iOS software is up to date. Sometimes I go back to the app from navigating and the stream is paused and I have to press play again. Other times I have to stop the app then restart. Check

    $275 (Avg Bid)
    $275 Avg Bid
    17 bids
    Receipt App Device 1 day left
    VERIFIED

    ...wireless capabilities embedded in phones. The device would be portable and work with most software used at the Point of Sale in North America/ Canada. This includes voltage specifications and transmission of data to the computer. In the design stages, an Ethernet cable would be used to send the data to the database. The software may not be an issue if

    $155 (Avg Bid)
    $155 Avg Bid
    1 bids

    We are looking for experienced C developer for embedded device. You will develop using OpenSSL secure communication and nRF52xx chip.

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    18 bids

    ...how much time they've watch a Wistia video. The users will enter their email address on a landing page (Using ClickFunnels) and then be forwarded to the next page with the embedded Wistia video. At certain timecodes while they are watching the video, tags will be created and submitted to their contact record in ConvertKit or Active Campaign behind the

    $173 (Avg Bid)
    $173 Avg Bid
    4 bids

    ...unfinished project. Agree to deliver within 3 days Ola needs the development of software for running specific radios. You should provide the source code and inform used languages ​​/ used software Devera delivery executable ready for final use On windows x32 and x64 The software should have the following functions: Set the radio that will be touched by

    $51 (Avg Bid)
    $51 Avg Bid
    3 bids

    ...Must have experience in Embedded Hardware development, debugging and fault finding and using test instruments. Must also have experience in Embedded Software development, firmware writing in C, more specifically be proficient in writing codes for 8/32 bits microcontrollers (Atmel/Microchip). Familiarity with RTOS in embedded controllers, or some sort

    $436 (Avg Bid)
    $436 Avg Bid
    24 bids
    $491 Avg Bid
    10 bids

    can provide example, about 2 sets of codes to scrape js, produce 2 csv outputs, please be super efficient, thank you

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    44 bids

    ...unfinished project. Agree to deliver within 5 days Ola needs the development of software for running specific radios. You should provide the source code and inform used languages ​​/ used software Devera delivery executable ready for final use On windows x32 and x64 The software should have the following functions: Set the radio that will be touched by

    $45 (Avg Bid)
    $45 Avg Bid
    3 bids

    ...unfinished project. Agree to deliver within 5 days Ola needs the development of software for running specific radios. You should provide the source code and inform used languages ​​/ used software Devera delivery executable ready for final use On windows x32 and x64 The software should have the following functions: Set the radio that will be touched by

    $34 (Avg Bid)
    $34 Avg Bid
    2 bids

    Arduino code exists for similar hardware architecture. Need implementation in embedded C for custom nRF52 hardware. EDIT: Code needs to be translated to embedded C in Segger IDE. (Knowledge of Arduino IDE is not sufficient.)

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    27 bids

    please refer to the document for the task Embedded c coding Knowldge on dispatcher code Knowledge on scheduling a task Knowledge on interrupt service routine

    $13 (Avg Bid)
    $13 Avg Bid
    3 bids

    ...looking for a mechanical engineer with some electronic embedded to create a vending machine capable to distribute lathe inserts one at the time. inserts can be stacked or eventually placed into little individual plastic boxes. Touch screen on the front to select the right insert to dispatch and software web based to managed inventory, users, consumption

    $25 (Avg Bid)
    $25 Avg Bid
    6 bids

    Hi, I am completing an assign...customer onto this page so the customer can ascertain their location and relay that info to the control room so a driver knows where to find that customer. I've used the term 'embedded code' for lack of a better term however i want to be able to paste the code i am given by the freelancer, into wix, and job complete.

    $24 (Avg Bid)
    $24 Avg Bid
    1 bids

    We have developed a door sensor that works with battery, we need minimum hardware setup for this to work. We are looking for someone who can develop door sensor over mqtt using esp8266 with minimal hardware, should read open and close state of the door.

    $17 (Avg Bid)
    $17 Avg Bid
    7 bids

    ...small project has two goals: 1. Add a button, pin or banner (or something equivalent) to our [login to view URL] website that reads "We're hiring" as a title and "Embedded Linux and kernel engineers" as a subtitle. A hyperlink to [login to view URL] should be associated with the added element. This should be done through a

    $186 (Avg Bid)
    $186 Avg Bid
    31 bids

    am looking to build new system embedded freelancer that can do sw & hw GPR systeam for underground metal detector

    $340 (Avg Bid)
    $340 Avg Bid
    1 bids

    ...etc Please note this ad is written by a project manager and is not detailed. If you think you are good in doing audio on Linux system, please send us a note and a senior software programmer will evaluate and replay to you. Since this type of project will need use of skype (or other) for communication a normal good spoken and written English is necessary

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    21 bids

    ...elements where we have a lot experience, but also some areas that is new for us and that is not a good combination with strict deadlines. So, we wonder if there are some skilled embedded programmers out there that can help us finish the project. We need a person that has experience in Alsa, and audio handling in Linux. The main project where we struggle is

    $57 / hr (Avg Bid)
    $57 / hr Avg Bid
    12 bids

    The company espressif has a ESP32 chip. Our company, is looking for an Electrical Engineer who has experience with ESP32. [login to view URL] DO NOT APPLY UNLESS YOU HAVE ESP32 Experience!

    $34 / hr (Avg Bid)
    $34 / hr Avg Bid
    38 bids

    I do not mind if you use prebuilt open source software (discuss first to ensure it is appropriately licensed) to reduce costs and provide better product. I need a simple document manager with an admin panel and a front-end users can log in to to view their documents (usually PDF) with a rough Bootstrap interface ADMIN PANEL: Create user account

    $43 (Avg Bid)
    $43 Avg Bid
    20 bids

    am looking to build new system embedded freelancer that can do sw & hw GPR systeam for underground metal detector

    $9 - $34
    $9 - $34
    0 bids

    Embedded Power BI Experts are needed on urgent basis.

    $3 / hr (Avg Bid)
    $3 / hr Avg Bid
    1 bids

    am looking to build new system embedded freelancer that can do sw & hw GPR systeam for underground metal detector

    $34 (Avg Bid)
    $34 Avg Bid
    1 bids

    circuit Designing, PCB Designing, Firmware Development, PCB prototyping, small scale PCB production, automation projects, Arduino projects, final year engineering projects.

    $26 (Avg Bid)
    $26 Avg Bid
    11 bids

    if you know using FreeRTOS on the Cortex-M4F development boards, please contact me.(For example, A simple LED display)

    $35 (Avg Bid)
    $35 Avg Bid
    1 bids

    Write an embedded application that can connect to multiple USB NFC writers to encode NFC tags. The OS on which the embedded application can run is not critical at this point - feel free to recommend one that is best suited to the requirement including Android, Windows 10 IOT, Linux, AWS IOT core etc. The application must do the following: 1) Take

    $682 (Avg Bid)
    $682 Avg Bid
    9 bids

    Top embedded software Community Articles