Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,977 fpga jobs found, pricing in USD

    I am looking for an electrical engineer who can work on FPGA TEST Board design. The project is to design FPGA TEST Board for XC7VX690T-2FFG1157I chip. We need power supply connectors as Banana jack and JTAG, UART, and SPI flash, and other decoupling capacitors and resistors. We just need simple workable Sch and PCB design wit optimal design. The candidate should have rich experience in FPGA PCB design using Altium.

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    13 bids

    We are looking for electrical and electronics engineers with good experience in following areas: • Embedded C Programming. • VHDL/Verilog, LabVIEW/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. Feel free to place your bid and mention your areas of expertise in your proposal. we highly encourage new freelancers to apply for this post.

    $156 (Avg Bid)
    $156 Avg Bid
    19 bids

    GPU cryptocurrency mining is not able to keep up with the power of FPGAs and ASIC miners. I would like to purchase FPGAs for cryptocurrency mining (at present it would be for the Kaspa coin, ). I have not selected an FPGA and am happy for recommendations, for this reason, I am looking for a programmer with a proven track record in the cryptocurrency mining area. there is GPU open-source software for this coin

    $1500 - $3000
    Featured Sealed NDA
    $1500 - $3000
    4 bids

    ok before we had a paper to review about floating point adder in fpga i already did but there is the furue work of that paper talking about specific topic for improvment if u could help me with it (far and close path algorithms).

    $145 (Avg Bid)
    $145 Avg Bid
    10 bids

    using Artix 7 implement Master UFS protocol design for the UFS Host device, Feel free to contact who's have experince on Stroage's(emmc, ufs, nand e.t.c) Skills required : Verilog , VHDL , C , C++

    $4634 (Avg Bid)
    $4634 Avg Bid
    7 bids

    1. "idle" state: It is the state when the machine is doing nothing and is idle. In "idle" state, if power button is "on" then the state transition takes place from state "idle" to state "a" and the output is low. If power button is "off ", then the state remains in "idle". 2. "a" state: In state "a", if fill_water is 1(that is if the water gets filled) then the...the water is filled that is if fill_water = 1, then the process gets completed and the state returns back to its idle state and the output is 1. Otherwise it remains in state "c". and in state a it depends on weight for example : 0-2 kilo 3 seconds to fill water 3-5 kilos 5 seconds 6-7 kilos 8 seconds for the weight 3bit for the s...

    $53 (Avg Bid)
    $53 Avg Bid
    11 bids

    Design 4xSDI seamless switcher with 2 HDMI outputs which support 1080p (Full HD) In this project must use FPGA for SDI inputs with input auto-detect resolutions feature. Output interfaces (2xHDMI) must support full range resolutions up to 1080p. Each output must could configured separately (out 1 has just 1 mode and out 2 supports 2 modes) Each output could have own mode and resolutions, must not effect one out config to another output. Freelancer who want to doing this project must design hardware and software (FPGA Firmware) and send to us the sample hardware designed also at the end must deliver all source codes and source files like PCB layout and programming codes also must will describe all codes and designing to our engineers for programming new boards. All hardware co...

    $1259 (Avg Bid)
    $1259 Avg Bid
    7 bids

    Verilog/VhDL FPGA Asic Electronics Microcontroller

    $93 (Avg Bid)
    $93 Avg Bid
    15 bids

    Dear sir, this is to document our project for FPGA Game on Intel ARM Processor. All materials are submitted and voice notes as an explanation for the project. Kindly please release to be able to finish the project. This is for 46 hours of work. We can not use international transactions as this takes a lot of time and can be blocked. If you have a counteroffer to reduce the number of hours, please send me. In addition, kindly please send me the SWIFT too. Kindly please check the game working here Kindest regards.

    $1595 (Avg Bid)
    $1595 Avg Bid
    1 bids

    I have a Xilinx KV260 board. Would like to develop a small robot project based on Vitis AI or PYNQ libraries. Need some simple documentation for education purposes. Be able to communicate.

    $114 (Avg Bid)
    $114 Avg Bid
    6 bids

    There are about 10 prompts (design + testbench) that need to be written in Verilog. Message me personally for the prompts. I need it done as soon as possible.

    $26 (Avg Bid)
    $26 Avg Bid
    9 bids

    Hi, We have a few projects which require very good knowledge of FPGA and Verilog. Please give me your bids stating, 1. Your total relevant experience in FPGA/Verilog. 2. Past Projects history/Experience. 3. How many hours you can spend weekly? Interested and well experienced candidates are most welcomed!

    $262 (Avg Bid)
    $262 Avg Bid
    2 bids

    The project is to develop an application based on FPGA development board with interfacing Analog Eval. board for processing audio signal. Here is details : H/W will be used : 1- Zynq Zedboard or MPSOC development board. 2- AD7134 dual chip AD Development board. Both boards connected by FMC LPC/HPC connector. S/W - F/W : 1- AD7134 is supported by AD and it has all firmware required to interface to many fpga board, so we can use this ready HDL/DRIVER for interfacing the AD7134 to our fpga board. 2- interfacing to PC through Ethernet with ready library "LIBIIO" or using "Matlab FPGA data capture". We have all hardware development boards on hand, can use it remotely. Any details will be discussed in details.

    $293 (Avg Bid)
    $293 Avg Bid
    8 bids

    A verilog code by using FPGA to implement an algorithm to merge the bit serial multiplier and bit parallel multiplier which is lead us to get the benefits of the tow methods which is to get the low cost of the bit serial multiplier and the speed or fast performance of bit parallel multiplier. FPGA is basys 3

    $180 (Avg Bid)
    $180 Avg Bid
    11 bids

    i need ur help in designing an accelerometer sensor and show reading in my fpga kit in vhdl

    $140 (Avg Bid)
    $140 Avg Bid
    8 bids
    $233 Avg Bid
    6 bids

    I need a H.264 realtime HD video encoder implemented on FPGA. There are many opensource implementations of H.264 video codec, but there are very few implementations that are running on FPGA. If you can help me, please let me know. I want to accept two approaches. 1) Plain VHDL/Verilog implementation 2) Hardware/Software co-design implementation Whatever approach you choose, the SoC should be able to process realtime video stream.

    $1199 (Avg Bid)
    $1199 Avg Bid
    5 bids

    I am trying to build a core (IP) that includes communication between SPI slave and wishbone master. I have written the state machine for both of them. also, I have the codes for both. The issue is that I don"t know how to make both of them communicate in a correct way. I have tried a lot but I was not able to do it. I wish that I can find someone that able to make it work so I can learn from it. I can help you with anything you need also I can provide the codes for you. Please, be aware that I am not willing to pay a lot for this so please make your price reasonable and cheap.

    $52 (Avg Bid)
    $52 Avg Bid
    1 bids

    This project is to design a game using FPGA board, VGA output and input from keyboard. The project is in progress with more than 25 hours of work.

    $894 (Avg Bid)
    $894 Avg Bid
    1 bids

    i need to map emg, ecg, eeg data into verilog code to be mapped in FPGA later of CAP SLEEP DATABASE. Also build a python code in machine learnig model for same.

    $137 (Avg Bid)
    $137 Avg Bid
    3 bids

    using Artix 7 implement Master UFS protocol design for the UFS Host device, Feel free to contact who's have experince on Stroage's(emmc, ufs, nand e.t.c) Skills required : Verilog , VHDL , C , C++

    $9583 (Avg Bid)
    $9583 Avg Bid
    6 bids

    Hi I need an FPGA Expert For my project. Please contact only those who are real experts in this field. thankyou

    $62 / hr (Avg Bid)
    $62 / hr Avg Bid
    11 bids

    I m looking for a fpga design for an BPSK demodulator, the fpga ill be using is altera, i ll also require an simulink file illustrating the functionality of the demodulator, i provide the input file for the demodulator.

    $193 (Avg Bid)
    $193 Avg Bid
    8 bids

    Hi Duc D., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $250 (Avg Bid)
    $250 Avg Bid
    1 bids

    We have one working FPGA and we need to copy the date of working FPGA to New same FPGA.

    $416 (Avg Bid)
    $416 Avg Bid
    5 bids

    Hi, I need my project done using Picoblaze, the ISE FPGA project. Please text me only those who are really professional in this field

    $70 / hr (Avg Bid)
    $70 / hr Avg Bid
    3 bids

    hello, I have a FPGA project and I want to hire someone for that. Please contact me only professional candidates

    $48 / hr (Avg Bid)
    $48 / hr Avg Bid
    8 bids

    need professional FPGA Verilog expert who can do this job perfectly who has experience in PicoBlaze soft microcontroller ANVYL board and know software ISE tool.

    $500 (Avg Bid)
    $500 Avg Bid
    5 bids

    Hello everybody, i m working on a project using de0 nano, i need to connect my input to the output of the built in ADC

    $28 (Avg Bid)
    $28 Avg Bid
    4 bids

    Hi Islam M., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $350 (Avg Bid)
    $350 Avg Bid
    1 bids

    I want professional electronic/electric expert who is good in microcontroller picoblaze soft, FPGA, and can do proejct in ISE and ANVYl board check the below requirments and let me know

    $537 (Avg Bid)
    $537 Avg Bid
    4 bids

    Hi Islam M., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $350 (Avg Bid)
    $350 Avg Bid
    1 bids

    Creating 2-chain Arbiter PUF on specific FPGA with 64-stages MUX for each chain. The output response PUF will be sent to external device, i.e. Arduino (microcontroller). On the other words, the output response PUF will be processed further on Arduino/microcontroller device

    $132 (Avg Bid)
    $132 Avg Bid
    7 bids

    I need someone professional who can do FPGA project. Please contact me only professionals. thank you so much

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    3 bids

    Array, booth, vedic and Wallace multiplier using verilog and implement it on FPGA

    $84 (Avg Bid)
    $84 Avg Bid
    6 bids

    FPGA in Vivado (RSA and elecptic curve) croptography implementing a modern cryptography algorithm ( Elliptic Curve ) and RSA-1024 bit  in cloud computing environment  using FPGA  and VIVADO HLS software to synthesis C++ code. then compare between two methods in terms of performance and time with most recent research , the main aspect for the proposed work plan is as follow: Generator to generate the keys based on the type of data then determines which method to use and key size for each method. Photos and video encrypted using Elliptic curve , text data encrypted using RSA. And select key size based on data type. the selected method will base a suitable mathematical algorithm to implement each step and phase which Comply with VIVADO HLS. Compare the result wi...

    $282 (Avg Bid)
    $282 Avg Bid
    6 bids

    I want to hire someone expert in both ASIC and FPGA flows

    $437 (Avg Bid)
    $437 Avg Bid
    10 bids

    Need help in Vivado FPGA projects on per hr basis. Will be a continuing project. Will generally ask question that some one who has GOOD RTL knowledge can answer

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    8 bids

    I need an expert in Xilinx SoC-FPGA to design a specialized accelerator for computer vision algorithm. The key is to train and optimize the network and implemented efficiently into hardware. Should be knowledgeable of PyTorch, Vivado, HLS, C++.

    $38 / hr (Avg Bid)
    $38 / hr Avg Bid
    10 bids

    Hello ,I have developed following code for gowin gw1n- lv1qn48c6/15 and i want to proffesional freelancer for check and testng. We have reference images of needle knitting mashing thread area. It has different color types of threads. Some times the needle are broke. We have to identify that. Att...have to identify that. Attached images have needed information. If there is broken needle it suddenly appear black dot as you can see in the images. Processing time can be should do video processing because we cant tell the time needle will other details will give later. I will help you every time while developing. planning to use following hardware's minimalist line FPGA development board ( gowin gw1n- lv1qn48c6/15) 2.5MP OV5647 CSI Camera Module 75 Degree 3.6mm Lens

    $185 (Avg Bid)
    $185 Avg Bid
    2 bids

    Hello. I want to ask you a question. I want an FPGA miner Can we launch test mining of any coin on our FPGAs during the day. Linux/Windows platform to choose from. Windows over RDP. And what is the price.

    $350 (Avg Bid)
    $350 Avg Bid
    1 bids

    Hello I'm looking for experienced engineer that will implement PCIe BAR interface to my private project forked for pcileech Project is developed on FPGA Chipset: Xilinx 7 Series XC7A35T on ScreamerM2 r03 This can be a basic implementation in the firmware (when it returns zero or unsupported request) If you would be interested in this work, I can provide more details about project and revenue for this work.

    $500 (Avg Bid)
    $500 Avg Bid
    1 bids

    I need a Pcb with 2 PFGA chips and a 500 MB memory module and input/output communication and power only via USB to computer. Each PFGA is 1,5 million Gates and both should be seen as one 3 million Gates. This is a POC and will be expanded to 25 x 1.5 million Gates on sucess.

    $595 (Avg Bid)
    NDA
    $595 Avg Bid
    22 bids

    I am looking for an expert in FPGA Programming having good background in mining

    $22 - $183
    $22 - $183
    0 bids

    Hello guys, I am looking for expertise in Lattice and Microsemi FPGAs and tools. You should also have some past in working on SERDES based designs. Thanks.

    $497 (Avg Bid)
    $497 Avg Bid
    1 bids

    I need a FPGA programmer to build a mining solutionfor mining Ethereum with a Xilinx U250 in azure vm NPsV1 os ubuntu

    $608 (Avg Bid)
    $608 Avg Bid
    7 bids

    I need a FPGA programmer to build a mining solutionfor mining Ethereum with a Xilinx U250 in azure vm NPsV1 os ubuntu

    $550 (Avg Bid)
    $550 Avg Bid
    3 bids

    Top fpga Community Articles