Lithium nokia charger project jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    6,173 lithium nokia charger project jobs found, pricing in USD

    What I’m really looking for here, is a product that connects to a Power plug, to be able to connect to a car charger. It is a small device. Let me know prices!

    $228 (Avg Bid)
    $228 Avg Bid
    19 bids

    I am looking to have a small mini microphone built with bluetooth capabilities powered by a lithium ion battery. I would like one built along with a full build order.

    $182 (Avg Bid)
    $182 Avg Bid
    11 bids
    Solar LiPo Charger board 4 days left
    VERIFIED

    Wanted is design, schematics, PCB layout and working prototype of a solar LiPO charger board. Documentation of all used parts as well as schematics and layout has to be delivered along the gerber files, a BOM list and a working prototype. The specs are as follows: Minimum requirements: - 1V .. 3V input from a photovoltaic cell - charging of a single cell LiPO battery 150mAh .. 500mAh capacity -...

    $398 (Avg Bid)
    $398 Avg Bid
    18 bids

    Seeking a freelancer to design our project. We wish to take readily available scales the have BLE 4.0 and leverage the new BLE 5.0 protocol to implement the mesh and beacon abilities within the product development. The scales we have access too, already have the ability to send weight we want to add temperature and battery/charger voltage to be sent to an app we want to develop. The micro-cont...

    $3091 (Avg Bid)
    $3091 Avg Bid
    41 bids

    Hi, 1. I want a professional engineer to design a battery charging circuit with all the protection circuits (overcurrent, overvoltage, overdischarge, cut-off, shortcircuit, etc). 2. Kindly check the attached file(fig-1), (fig-2). I have different excitation methods for piezo resistive sensor. Which one is stable and long term stability. If you have any other ideas, kindly share it. 3. I would to ...

    $94 (Avg Bid)
    $94 Avg Bid
    9 bids

    I want to design a ultra compact 6A 80W Li-ion charger. A power electronic expert with minimum 6 years of experience is required

    $1134 (Avg Bid)
    $1134 Avg Bid
    25 bids

    Product is minimum sized portable digital radio , Units to be inculuded are lipo battery (minimum 6 hours lasts ), battery charger , digital radio tea5767 , headset output , minimal chip which you offer (low energy consume is important), volume up , volume down , search up , search down , on/off switch , micro usb input for charge . Headset cable can be used as anten or anten out is pin out, store...

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    25 bids

    We make quality battery charger and batteries for the vape industry. Now we need some minority language writers to work for us, such as Spanish, Italian, Russian, German, French and Japanese, etc. We will give you some keywords and the description of the products to you then you write an articles. Of course, pictures are provided. If necessary, we can send you a sample for reference. This is ou...

    $106 (Avg Bid)
    $106 Avg Bid
    19 bids

    Revamp of Banner for iFixit Repairs- please update banner to include the below brands with logos, images must be vector quality. We just really need somebody to put it all together for us. What models we repair- Apple Samsung Sony Oppo Google Nokia LG Huawei & more

    $17 (Avg Bid)
    $17 Avg Bid
    51 bids

    We are looking for a wireless sensor PCB layout and firmware to drive it. The device should use the eRIC-LoRa radio module from [login to view URL], to transmit distance measurements, measured by ST's VL53L0X sensor. The device needs to have a low cost ARM MCU, be powered by a non-rechargable AA 3.6V lithium battery (already sourced), RA edge mounted SMA connector for the antenna, read sw...

    $802 (Avg Bid)
    $802 Avg Bid
    25 bids

    Portable small portable electric burner, powered and powered by mobile phone charger, for sale: 10 pieces at $ 750. Who finds me the buyer has a rate of 5% of the selling price. Or who wants to buy from me directly, he ( she ) can write me here ( send me a message ), or write his ( her ) number whatsapp and I contact him ( her ). Read Less

    $25 (Avg Bid)
    $25 Avg Bid
    1 bids

    I need an Android device built custom to these specifications: - AWS LTE, 4G, 3G (UTMS Band IV / HSPA+ / transmits at 1710–1755 MHz and receives at 2110–2155 MHz.) - Regular GSM 1800 MHz - WiFi @ 5.8 GHz & 2.4 GHz (Dual Band) - Bluetooth - USB C - Octacore processor - 4GB RAM - 64GB ROM - Unlocked bootloader - Pre-rooted, preferably custom OS The device should think th...

    $364 (Avg Bid)
    $364 Avg Bid
    12 bids

    LOGO for e commerce website, powerbank, wall charger and flash drive.

    $56 (Avg Bid)
    $56 Avg Bid
    62 bids

    Portable small portable electric burner, powered and powered by mobile phone charger, for sale: 10 pieces at $ 750. Who finds me the buyer has a rate of 5% of the selling price. Or who wants to buy from me directly, he ( she ) can write me here ( send me a message ), or write his ( her ) number whatsapp and I contact him ( her ).

    $90 (Avg Bid)
    $90 Avg Bid
    3 bids

    needs to be able to build and design a portable charger bracelet. Taking an existing product and adding a small battery in it to charge your phone 5-10% Message for more details. design and create a working model 30 days

    $2776 (Avg Bid)
    NDA
    $2776 Avg Bid
    30 bids

    Someone willing to work immediately and fast. I have some parameters and I want to use these parameters to run an elctrochemical Impedance spectroscoy (Nyquist plot)

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    11 bids

    Need press release on business in lithium ion battery only PR writer contact indian not allowed

    $17 (Avg Bid)
    $17 Avg Bid
    3 bids

    We have an Android app that was built against Android 5.1 and it needs updating to Android 9 (the latest version). We have managed to update most of it, but there is a problem with a legacy component: [login to view URL] in particular. Also one of the libraries: [login to view URL] I think needs replacing. We need an Android developer to bring the codebase fully up to date and removing any legacy...

    $270 (Avg Bid)
    $270 Avg Bid
    35 bids

    I need a solar electrical design schematic for a residential solar system. The system will use 18 pieces of 380 watt panels for a total of 6.84 kWh. The inverter design is based on 5kWh. We want to know if we can use a 6kW solar and 5kWh inverter. If not, we can lower the size of the panels. Following Specs are provided - Panel Specs: See attached - Inverter Specs: See attached Growatt SPF 5000...

    $153 (Avg Bid)
    $153 Avg Bid
    25 bids

    Examples of good product queries - "nail polish to go with navy dress" - "computer science book" - "dog seat cover" - "dog seat cover for ford f150" - "iphone 7 yellow case" - "multi purpose hammer" - "hammer with rubber head" - "Samsung phone's best cover" - "General purpose hammer" - "non toxic b...

    $90 (Avg Bid)
    $90 Avg Bid
    10 bids

    Hi, We are looking for an image of a house similar to the image #1 attached, we need a most modern house #2 as example to recreate the picture #1. In other words, we need to replace that image of the house for a modern design where we can integrate the addons ( battery, EV charger, solar panels, etc....) We dont need the text in the new picture but YES all the elements, we can give you more pictu...

    $68 (Avg Bid)
    $68 Avg Bid
    24 bids

    Label and Analise few of the NLP features like POS, NER, length of the query for classifying good and bad query. Create a dataset using [login to view URL] Examples of good product queries - "nail polish to go with navy dress" - "computer science book" - "dog seat cover" - "dog seat cover for ford f150" - "iphone 7 yellow case" - "multi pu...

    $25 (Avg Bid)
    $25 Avg Bid
    3 bids

    We are looking for a image similar to the image attached, no titles/text but with the same elements (battery), charger, panels etc. in a more modern house (image 2)

    $47 (Avg Bid)
    $47 Avg Bid
    32 bids

    We build a multi function power pack with welder / generator/ compressor / battery charger. The all-in-one unit is explained by the attached flyer. This model ( we do have smaller models), is used to equip field maintenance trucks, on site vehicle and machinery repairs and service, where these 4 components are available with one engine, in one compact unit with a suitable footprint for mounting ac...

    $298 (Avg Bid)
    $298 Avg Bid
    7 bids

    We build a multi function power pack with welder / generator/ compressor / battery charger. The all-in-one unit is explained by the attached flyer. This model ( we do have smaller models), is used to equip field maintenance trucks, on site vehicle and machinery repairs and service, where these 4 components are available with one engine, in one compact unit with a suitable footprint for mounting ac...

    $1198 (Avg Bid)
    $1198 Avg Bid
    13 bids

    Can u develop a software to be able to change Nokia c2-01 imedi

    $1226 (Avg Bid)
    $1226 Avg Bid
    7 bids

    Sri Nagar- Kovalavedu Village, Kanchee puram, Chennai About the Project Strategically just 700 mts from the Bangalore – Chennai National Highway, Sri Ayyappa Nagar, an adobe of abundant serenity, peace, happiness, comfort and prosperity is yet another prized offering from the renowned house of ABI's. A brand name that's feathered with stupendous honours, incredible awards and an...

    $25872 (Avg Bid)
    $25872 Avg Bid
    1 bids

    I want to simulate the impedance of Lithium ion battery, thereby plotting a Nyquist plot using a set of parameters. The plot will be real against negative impedance

    $147 (Avg Bid)
    $147 Avg Bid
    22 bids

    I am a software developer. We are doing a project where we need a detailed model of a vehicle that we will design. Cannot give any more details now. Some Details of the project... The person has to be in Mumbai and, do the project from my office. Also the person should have all the necessary software required, pre-loaded on their laptop. Either a tricycle or a quadricycle is what I am looking at. ...

    $353 (Avg Bid)
    $353 Avg Bid
    26 bids

    1) Prepare dataset for good product vs bad product query if required. ( One can do it quickly using [login to view URL] ) 2) Examples of good product queries - "nail polish to go with navy dress" - "computer science book" - "dog seat cover" - "dog seat cover for ford f150" - "iphone 7 yellow case" - "multi purpose hammer&quo...

    $365 (Avg Bid)
    $365 Avg Bid
    13 bids

    I am a software developer. We are doing a project where we need a detailed model of a vehicle that we will design. Cannot give any more details now. Some Details of the project... The person has to be in Mumbai and, do the project from my office. Also the person should have all the necessary software required, pre-loaded on their laptop. Either a tricycle or a quadricycle is what I am looking at. ...

    $335 (Avg Bid)
    $335 Avg Bid
    46 bids

    Can you please make an explainer video on how a lithium ion battery works. Here is a youtube example of a similar video. [login to view URL] The video will go up on our blog: [login to view URL] And on our youtube channel: [login to view URL]

    $307 (Avg Bid)
    $307 Avg Bid
    51 bids
    $314 Avg Bid
    65 bids

    what i need to done is that : using arduini UNO and Andriod Studio I want to send a warning to the mobile application that should be made using Andriod Studio. from the sensor LM35 measurment using esp 8266 as wifi. i made some user interface with the Andriod Studio that I will give it to the person who is gonna help me with the code.I also want to use (Nokia 5110 lcd) connected to the arduino t...

    $55 (Avg Bid)
    $55 Avg Bid
    18 bids

    we would like to provide samples to the reviewing public and then they release a report to make people understand this kind of product. Please relative pro man contact me.

    $522 (Avg Bid)
    $522 Avg Bid
    8 bids

    PCB DESIGN FOR 15kW DC-EV Charger consist of the following parts: 1- PFC 2- HV DC-DC BOOST CONVERTER

    $1347 (Avg Bid)
    $1347 Avg Bid
    12 bids

    Hello. I am looking for someone who can draw and model a beautiful and sexy off-grid vehicle charger that is designed to be a portable charging station. Needs a realistic render 1. It needs a retractable/extendable solar roof 2. The back has to have a etractable/extendable bicycle rack Please let me know how much is it and if you are able to do it. We can sketch and discuss before going digital....

    $197 (Avg Bid)
    $197 Avg Bid
    40 bids

    Responsible for order validation and processing for customer’s PO. Scope of activities include order fulfillment for customer requirement, freight forwarder management and invoice creation for sales recognition. End to End process : Customer CPO(Input)-> CSO(Output)->Shipment->Invoice Tools used: Alliance(Web based tool for order structuring) Blue Planet(SAP for Order validation)

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    19 bids

    We need someone who can unlock Nokia 7.1 devices.

    $220 (Avg Bid)
    $220 Avg Bid
    6 bids

    My name is David, here is my project: To do list on website: [login to view URL] All text and pictures will be provided for you. Your job is to put it in and do SEO on the new content. Looking for a firm quote and time frame to complete 100%. To do List: -remove Google+ icon link at all headers, replace with Instagram icon -Add some text on the main page to the left side of "100% satisfa...

    $111 (Avg Bid)
    $111 Avg Bid
    70 bids

    I have 12s21P battery rig I need to design a BMS that do the following The requirements for control are split into two main sections: 1. Requirements for the charging state: a) Control the charging process b) Avoid overcharging any cell c) Balance the cells during the charge state d) Check the battery temperature 2. Requirements for the discharging state: a) Limit the max output current of the b...

    $125 (Avg Bid)
    $125 Avg Bid
    3 bids

    Design and build a battery formation charger unit with following [login to view URL] or almost similar to the depicted in the attached file, that meets aprox. following features: *To attend/charge 170 to 200 motorcycle batteries; *Output current each post/terminal 12V – 8AH; *Input Voltage 220V (single phase) or 380V (three phase), both 50 Hz. Scope involves both design and manufactu...

    $3599 (Avg Bid)
    $3599 Avg Bid
    3 bids

    The project consist in modelling a single object, consisting in a gym locker: - CAD file and technical files will be provided for the model. Here the parametric options to include in the 3d model, (each handle will be required to 3d modelled): - Key - Lockable - Handle Han 01 - Knob Han 02 - Handle Han 03 - Handle Han 04 - Handle Han 05 - Handle Han 06 - Handle Han 07 - Knob Han 08 Here the...

    $88 (Avg Bid)
    $88 Avg Bid
    28 bids

    Hi, I need a quick visualization to present a design idea for a display stand. The stand is to hold a phone battery charger unit which will be placed in public spaces. The visualisation does not need to be very detailed or with background imagery at this stage, I just need the stand quickly modelled. I will provide an image to show the stand we wish to copy, our designers sketch and the logo / ...

    $98 (Avg Bid)
    $98 Avg Bid
    33 bids

    we are a leading brand in mobile accessories and we required a packaging design for our charger.

    $69 (Avg Bid)
    $69 Avg Bid
    28 bids

    I'm looking for someone to take an existing floor plan and put together a revit architectural/mep set. I can take architectural/mep separately but it would be better if it can be done by the same party because it's a simple floor plan/house. I have a geotech survey of the lot, and an existing revit file. We'll use that as a starting point, and map out the framing of the walls/floor...

    $338 (Avg Bid)
    $338 Avg Bid
    13 bids

    I need a help to prepare my TIPE " Travaux d'Initiative Personnelle Encadrés " that I toolk about the "wireless power transmission ". Today, the use of electric wire is a problem because of the increasing number of electric devices. So the wireless transmission by coupled coils represents an alternative solution used in wireless charger. The low yield of this syste...

    $145 (Avg Bid)
    $145 Avg Bid
    3 bids

    We are looking for design that will be used for manufacture of electrical enclosure. We wish to house an inverter, lithium battery and electrical isolators and circuit breakers required. Intention is to use design to get case laser cut and folded with seams welded. Enclosure will need to be IP65 and would prefer to either have double door setup for access to electrical and isolators.

    $288 (Avg Bid)
    $288 Avg Bid
    16 bids

    I need 4 essays written for my website: [login to view URL] Here are the guidelines: -All essays must be between 1000-1100 words long. -No grammatical mistakes, proper english sentence structure. -standard essay format, Title, sub headers, etc -proper keyword density 2% or less - you must have passed academical writing or english exam - All essay content must be acceptable for my website, c...

    $75 (Avg Bid)
    $75 Avg Bid
    20 bids

    Electrical Engineer to provide full electrical engineering and circuitry solution, Printed Circuit Board Assembly design through the fully compliant and working prototypes with all related components to validate compliance to product modality requirements. Project components in the electrical circuit include and not limited to RGB/RGBW LED lights, Lithium Ion/Polymer or Iron-Phosphate rechargea...

    $2263 (Avg Bid)
    $2263 Avg Bid
    22 bids