Logo design for lumber and plantations jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    692 logo design for lumber and plantations jobs found, pricing in USD

    Would you be able to provide a lumber list/building material list from the plans you drew me?

    $139 (Avg Bid)
    $139 Avg Bid
    9 bids

    I am looking for a firm to look over my plans to build a roof and wall for quite a large patio 40'x12'. This will be installed and built by a local contractor. In order for me to get a building permit, I need an engineer to approve that my plans are structurally sufficient for my snow load in my area. There will be one framed wall on the left side, made out of a 2x6 wood framing. This design will include 10 total posts supporting the structure, all the corner posts will have bracing as in the diagrams for latteral loads. It will be connected to the manufactured home only for roof flashing purposes. There will be no load on the house structure. The main structure will be oit of 2x8 framing on 16 inch centers. There...

    $389 (Avg Bid)
    $389 Avg Bid
    25 bids

    I am searching for a knowledgeable expert in Australian domestic structural timber procurement. • Relevant Expertise You'll ideally have substantial experience in the timber industry, dealing with procurement of hardwood materials for building projects. • Requirements I need assistance and advice surrounding my startup concept, and whether it would be helpful and beneficial for the Australian timber industry. • Desired Outcome Your guidance and expertise will facilitate my startups business model formation. Do apply if you have the experience and can fulfill the requirements.

    $22 / hr (Avg Bid)
    $22 / hr Avg Bid
    3 bids

    ...am looking for a creative illustrator, specifically well-versed in cartoonish illustration, to bring my unique vision to life. The project will be a humorous representation of a beaver chewing a tree trunk and a piece of square lumber emerging from the other side of its mouth. The artwork should capture the whimsy and humor of this imaginative scene. As a way of applying, please share your project proposals in detail, wherein you can discuss your approach to developing this cartoon, your planned workflow, turnaround times and total costs. Critically, the final artwork should be in a digital format, so fluency in various digital design platforms is a must. Past experience in digital cartoon illustration would be advantageous. Key Skills: - C...

    $250 - $750
    Sealed
    $250 - $750
    98 bids

    ...multi-service business that will also include house cleaning and pet care. For this task, I am specifically seeking assistance with: - Mowing and trimming: You will be required to maintain the grass with regular mowing and precise trimming around walkways and flower beds. - Fertilizing and weed control: Ensuring the health and aesthetics of the lawn will include applying appropriate fertilizer and effective weed control treatments. - Gardening: The maintenance and care of existing plantations and possibly being part of new garden designs. The lawn in question is of a medium size, between 1,000 - 5,000 sq ft. The ideal freelancer for this job should have significant experience in lawn care and...

    $250 (Avg Bid)
    Local
    $250 Avg Bid
    1 bids

    ...specialist to secure large quantities of lumber, steel, and cement from suppliers. The ideal partner for this project would be: We are based in Bucharest Romania, - Experienced in sourcing and procuring construction materials on a large scale. - Possessing sound knowledge and contacts within the European construction materials market. - Capable of negotiating deals to ensure quality and cost-effectiveness. - Able to ensure timely delivery and coordinate logistics seamlessly. Your primary responsibilities would involve: - Establishing contacts with reliable suppliers. - Intensive negotiation to achieve best prices. - Overseeing delivery arrangements to ensure timely arrivals. Please, your bid should reflect your ability to execute th...

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    8 bids

    ...structural safety and building code compliance, specifically for Laminated Veneer Lumber (LVL) within a residential setting. This project is crucial for ensuring that the structural integrity of the LVL used in my post-construction phase meets all necessary safety standards and complies with local building codes. **Key Requirements:** - **Expertise in Structural Safety:** You should have profound knowledge in assessing the structural safety of buildings, particularly with experience in LVL. Understanding its load-bearing capacity and ensuring it's up to standard is crucial. - **Building Code Compliance:** A strong understanding of local building codes and the ability to verify that the LVL installation complies with these regulatio...

    $750 - $1500
    Local
    $750 - $1500
    0 bids

    ...designer to create an innovative and visually appealing driveway layout for my property. The project involves designing a driveway that is not only functional but also enhances the aesthetic appeal of the property. Here are the specifics: - **Material Selection:** The driveway should be designed using block paving. The choice of block paving is essential for its aesthetic appeal and durability. - **Area Specification:** The total area of the driveway exceeds 100 square meters. The design should efficiently utilize the space, ensuring a balance between functionality and style. - **Additional Feature:** I would like to incorporate landscaping around the driveway. This includes selecting the right plants and design features that wi...

    $516 (Avg Bid)
    $516 Avg Bid
    44 bids

    ...Specification for Mastefi Export SAS Website Enhancement () 1. Implementing the ability to order coffee samples in a few clicks: - Add a "Order Coffee Samples" button to the homepage. - Develop a sample order form with fields for quantity, choice of coffee type/region, and contact information. - Integrate the option to select samples from the existing assortment. - Develop a mechanism for automatic calculation of sample costs and total order amount. 2. Adding a page for Brazilian coffee with varieties: - Create a new "Brazilian Coffee" page in the main menu. - Provide information about various types of Brazilian coffee, their characteristics, and taste profiles. - Include visual materials: photog...

    $611 (Avg Bid)
    $611 Avg Bid
    47 bids

    I'm in search of a talented graphic designer to craft a detailed logo that will be used primarily in marketing materials. It is essential that you're able to create captivating designs that communicate the right brand messages. Here's what I'm looking for: Brand description & Name: -Name- Firing Line LBM Advisors Description- This is a consulting company for the building industry in the lumber part of the industry. This is a traditional industry and involves building and construction. The logo can have some type of tie to the construction industry or be words only. It is mostly for a male audience. - An adept hand in detailed logo designs or Minimalistic. Abstract styles won't align with my vis...

    $100 (Avg Bid)
    Featured Urgent Guaranteed NDA
    $100
    1577 entries

    Agriculture / Machines Agriculture / plantations Agriculture

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    26 bids

    I am looking for a freelancer to help me with a project titled "Report for teak plantation in India-Telangana state". The purpose of this report is to analyze the economic potential of the teak plantation. Skills and Experience: - Experience in conducting economic analysis - Knowledge of the teak plantation industry in India - Ability to gather and analyze data related to teak plantations - Strong research skills to gather information on different teak plantation techniques, available teak types, etc. The report should be between 10-20 pages in length, providing a comprehensive analysis of the economic potential of the teak plantation with below content Task List Requirement 1-Economic viability For teak planation in 1acre of land ...

    $82 (Avg Bid)
    $82 Avg Bid
    9 bids

    I am looking for a structural engineer who specializes in residential projects and can assist with the design phase. Skills and experience required: - Strong knowledge of residential structural design - Proficiency in using relevant software and tools - Ability to analyze and interpret architectural plans - Attention to detail and ability to ensure structural integrity - Good communication skills to collaborate with architects and other team members - Familiarity with local building codes and regulations I need a MN. Stamped structural engineered plan. I have a townhouse unit with a 5‘ x 18‘ unsupported balcony. They were built 50 years ago with SPF lumber 16” of and they are now f...

    $407 (Avg Bid)
    $407 Avg Bid
    28 bids

    I want to build a mobile app for tree planting using React Native + .NET 6 + AWS The app will basically provides that; Organizations will offer plants (like a product). Donors will buy these plants. Both Organization & Donors should be able to; - register/Login via e-mail and password - register/Login via Google SSO - update their own profile page (and settings if needed) - receive Welcome e-mail after registration - bypass login page if selected "Remember me" checkbox in the previous signin. - reset their password via "Forget password" (send random pin number in e-mail to reset password) Donors should be able to; - list all organizations - search organizations by text - display an organization's profile (Name, Logo, Breif Inform...

    $852 (Avg Bid)
    $852 Avg Bid
    65 bids

    I am looking for a landscape designer to create a beautiful and functional outdoor space for my 3-acre farm. The ideal candidate will have experience working with large areas and be able to incorporate both my specific preferences and suggestions into the design. Additionally, I would like the design to include a water feature to enhance the overall aesthetic. The land is amidst beautiful mountains and very scenic, so would like to ensure that we design accordingly. We plan to have a walking path across the property. We shall be doing fruit and flower plantations as per local vegetation. Must include below items, 1. Walk ways 2. Master plan for plantation (areas to be designated) 3. Water bodies 4. Lawns 5....

    $146 (Avg Bid)
    $146 Avg Bid
    19 bids

    I am in need of a ridge beam that will be over 20 feet long to support a medium load. The material I prefer to use is engineered lumber. I have looked into various products such as glulams and LVLs and believe they will work well for my needs. I need a provider who can construct a reliable beam that meets code requirements and can handle seismic activity if required. I'm looking for a provider with good customer service, supportive staff, and reasonable prices. I'm ready to move forward with the project as soon as I find a suitable provider.

    $180 (Avg Bid)
    $180 Avg Bid
    2 bids

    ...ordering, programming, stock management / inventory and usage of chemicals and fertalisers for our farm. Here's the workflow and process; We currently use 125 different chemical, fertaliser products on our farm , of those we probably use 100 frequently. We apply these chemicals to our apple , pear , wine grape and olive plantations. We order most of our products from one supplier but in order to remain competitive we want to track pricing from other suppliers in case our main supplier is over priced. How it works is as follows: Here is the workflow for the project for you to view And the full brief

    $755 (Avg Bid)
    $755 Avg Bid
    19 bids

    ...described specifications and rendering is a detailed process that may require professional design and construction skills. Here's a scope of the construction process based on the information you provided: Scope for Custom Door Construction: Design Phase: Design the door layout, including the placement and size of the letters "CINEMA." Select the font for the letters, as specified. Create a detailed rendering or blueprint of the door design. Plan for the integration of LED lights for the Plexiglass layer. How we plan to build First Layer: 3/8" Walnut for the base layer with the letters "CINEMA" routed out. Second Layer: 12MM Plexiglass for transparency, backlit ...

    $50 (Avg Bid)
    $50
    31 entries

    As an environmentally responsible Gold producer startup, I have a project looking for help with a Kickstarter campaign. To make the campaign as successful as possible, I need support in creating a compelling campaign page, developing a marketing strategy and managing campaign updates and communications. The project is about mining among cocoa plantations in Ghana and I have some existing materials and content, but need help refining them. Having the right support on this project could make a huge difference to the success of my campaign.

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    19 bids

    I am looking for a freelancer to create blueprints for a large deck (over 300 square feet) for me with specific design features in mind. This is a large deck with specific areas of no railing. One side is ground level and then terminates at approximately 28” above the ground level. There will be a ledger board 2x12 pressure treated attached to the concrete wall of the existing the materials used to construct the deck be pressure treated ground contact lumber. The blueprints should be of professional quality in order to submit to the permit office. Timely delivery is essential and any advice and ideas from the designer is welcomed. Experienced freelancers in deck building and blueprinting are encouraged to apply.

    $412 (Avg Bid)
    Urgent
    $412 Avg Bid
    25 bids

    ...to live, work, and play without pain! Main Copy: Hey Pain Warriors! Wonsettler Physical Therapy & CrossFit 519 have joined forces to help you beat the pain and rejuvenate your life. Whether you’re a member of CrossFit 519, a dedicated worker at 84 Lumber, or anyone struggling with low back pain, this workshop is the remedy you need! Key Details: Date: October 28th Time: 10:30am - 12:30pm Location: CrossFit 519, 1019 Rt. 519, Eighty Four, PA 15330 Cost: Absolutely Free! What You’ll Learn: -Empowering Movements to Ease Low Back Pain -Techniques to Boost Performance at Work & Gym -Proactive Measures to Prevent Future Pain & Injuries Who Can Benefit? -Members of CrossFit 519 -Employees of 84 Lumber -Anyone plagued by recurring low ...

    $6 (Avg Bid)
    Guaranteed
    $6
    35 entries

    We need a list of all the major producers in Canada primary list, US as secondary list that require freight to me shipped. We are a carrier trucking company based in Canada. You will need to look up on the different trade council website (example: BC Lumber Trade Council for Lumber) to create your list and other resources website. Industries are (MEAT, PRODUCE, LUMBER, REEFER LOADS, OIL & GAS, AGRICULTURE). THE CONTACTS YOU PROVIDE MUST ABIDE BY CANADIAN CASL LAWS AND MUST HAVE ALREADY PROVIDED CONSENT TO BE EMAILED WITH MARKETING CAMPAIGNS.

    $76 (Avg Bid)
    $76 Avg Bid
    30 bids

    We need a list of all the major producers in Canada primary list, US as secondary list that require freight to me shipped. We are a carrier trucking company based in Canada. You will need to look up on the different trade council website (example: BC Lumber Trade Council for Lumber) to create your list and other resources website. Industries are (MEAT, PRODUCE, LUMBER, REEFER LOADS, OIL & GAS, AGRICULTURE). THE CONTACTS YOU PROVIDE MUST ABIDE BY CANADIAN CASL LAWS AND MUST HAVE ALREADY PROVIDED CONSENT TO BE EMAILED WITH MARKETING CAMPAIGNS.

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    82 bids

    We need a list of all the major producers in Canada primary list, US as secondary list that require freight to me shipped. We are a carrier trucking company based in Canada. You will need to look up on the different trade council website (example: BC Lumber Trade Council for Lumber) to create your list and other resources website. Industries are (MEAT, PRODUCE, LUMBER, REEFER LOADS, OIL & GAS, AGRICULTURE).

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    53 bids

    ...Description: Design Indoor Vegetable Garden Shelves Project Overview: I'm seeking a design for two wooden shelves intended for an indoor vegetable garden situated in a small, concrete-walled cold room of a basement. The primary purpose is to accommodate black plastic trays that will hold small potted baby plants. Specifications: Room Dimensions: 7.1 feet in height, 135 cm in width, and 2.5 m in length. Shelf Dimensions: Each shelf should be 7-foot tall, 55 cm deep, and 135 cm wide. Materials: Use 2 x 2 lumber for the four corners of each shelf and 2 x 1 lumber for the adjustable shelves. Placement: One shelf should be on the left wall and the other on the right wall, with both their backs flush a...

    $21 (Avg Bid)
    $21 Avg Bid
    36 bids

    Architectural designs for the Drive-in food court - Purpose: The drive-in food court project requires architectural designs that cater to the specific needs of a restaurant. - Features: The design should include a well-equipped kitchen area to support food preparation and service, good dine-in spaces with lush plantations, and a peaceful dining area. - Style: There is no specific style or theme in mind for the design, allowing for flexibility and creativity. - Ideal Skills and Experience: - Architectural design expertise with a focus on restaurant projects. - Knowledge of restaurant functionality and flow. - Ability to create efficient and practical kitchen layouts. - Experience in designing...

    $272 (Avg Bid)
    $272 Avg Bid
    30 bids

    I am looking for an experienced videographer to capture video footage for my furniture company in Indonesia. This will involve travelling to 1 - 2 of our teak furniture factories in Jepara, Central Java, and possibly the teak plantations. This video should be cinematic and documentary style. Examples of work/video style required: It is very important that the videographer has experience creating professional-level videos and is able to communicate well in English. Aside from the creative aspects of the project, I’m also looking for someone who can deliver on their work in a timely manner. I expect that communication will be open and regular throughout the entire process. Thanks!

    $1468 (Avg Bid)
    Local
    $1468 Avg Bid
    6 bids

    Engineering design for the foundation, wall and roofing framing construction using *conventional* configuration per Connecticut code for a building 33’ in length, 14’ wide, 17’ height with a single and open space. No interior walls or supporting beams. Slope of roof is 8:12. 2x6 structural lumber Engineering Solution must include height of foundation wall and hold downs to secure the framing to the foundation per Connecticut code. Roofing solution must include subsection to show where headers & bracing will be located. Architectural elevations are available as well as floor plan. Deliverable includes equal design plans that can be submitted to a local town for approval. Engineering plan must be st...

    $414 (Avg Bid)
    $414 Avg Bid
    55 bids

    Engineering design for the foundation, wall and roofing framing construction using *conventional* configuration per Connecticut code for a building 33’ in length, 14’ wide, 17’ height with a single and open space. No interior walls or supporting beams. Slope of roof is 8:12. 2x6 structural lumber Engineering Solution must include height of foundation wall and hold downs to secure the framing to the foundation per Connecticut code. Roofing solution must include subsection to show where headers & bracing will be located. Architectural elevations are available as well as floor plan. Deliverable includes equal design plans that can be submitted to a local town for approval. Engineering plan must be stamped...

    $250 - $750
    Urgent Sealed
    $250 - $750
    12 bids

    Timber milling and woodworking business. Turning logs into lumber and crafted wood products. Logo can include fir tree and saw blade images. Colors : evergreen, sky blue, orange. Alternate logo to include Pumpkin Ridge Millworks initials (PRM) Timber milling and woodworking business. Logo can include fir tree and saw blade images. Colors : evergreen, sky blue, orange. Alternate logo to include Pumpkin Ridge Millworks initials (PRM)

    $202 (Avg Bid)
    Guaranteed Top Contest
    $202
    990 entries

    I'm looking for a talented architect to create a contemporary design for three types/sizes of steel-framed A-frame cabins - 7x6m duplex, 6x5m duplex, and 5x4m. I'm NOT looking for 3D modelling of an A-frame. If you are not an architect, this is NOT the job for you. Talented though you may be, I need structural drawings of an A-frame house which is capable of being built. Drawings that I can hand to my Contractor and have him follow. The final outcome of the project I'm expecting should include building plans. Further, I'm looking to utilize light steel framing and not timber/lumber/wood, powder coated galvanized roof sheeting and a cementitious board internal lining in the design, so kno...

    $536 (Avg Bid)
    $536 Avg Bid
    42 bids

    ...boss @ all trees with steel kicker below attached with 1.25 x 12" galvanized Lag bolt. I can send pics if needed I Have attached Documents For My Treehouse that I have so far . I have already installed Main support beams (PDF "tree layout low support beams updated" ). Have also installed Just the beams shown on (PDF "tree floor beam connections" ) TJI Joist and 2x12" treated lumber not installed. I Have stopped any work so far until I can get engineering complete so I can get a building permit . As you will see I have a roof overhang @ 1' - 6". I Have Arborist report. The west side will have a large porch all framed with 2x12 treated lumber 16" O.C and covered with composite decking materials, hand rai...

    $1955 (Avg Bid)
    $1955 Avg Bid
    10 bids
    Trophy icon Logo for family ranch Ended

    ...lake that is full of deer, moose and elk roaming around and is known for big whitetail bucks. It’s very cowboy/redneck and are surrounded by wilderness. Some brainstorming ideas are the photos I included… instead of the word cowboy “ Country” could be a rope. We raise beef cattle, chickens and pigs and breed Labrador retrievers. We are working to go off grid and burn 2 wood stoves in our farmhouse. We harvest and process all of our own lumber You can look at our Instagram really interested in creativity Brainstorming ideas of the logo - would love if someone could incorporate our farmhouse (see photos) the ranch gate arch and the fencing we have into the logo - have hal...

    $55 (Avg Bid)
    Guaranteed
    $55
    292 entries

    ...roof and trusses plan lay out for my small home. I don't want any off-the-shelf designs - I need something custom-made, and specifically with ventilation included. I'm open to suggestions but ultimately, I'm looking for an experienced professional to create me a plan that meets all of my needs and brings my vision to life. I look forward to seeing what options are available and getting started as soon as possible. Thank you! I live in Calgary, Alberta, Canada. I have construction drawing ready. Normally roof and trusses plan is done by lumber supplier, who provide it for free. however they are 2-3 months behind so I want to spend some money to get it done by a freelancer. You must know the construction te...

    $48 (Avg Bid)
    $48 Avg Bid
    14 bids

    Hi I am looking for someone to convert my basic floor plan that I designed into professional quality architectural/building plan for a permit application. It is for a 16m x 16m wooden platform with a two story glamping tent structure. I need plumbing, septic, electrical configuration on the plans. I included the layout of both floors of the two story glamping tent (see attached). The walls of the tent will be 4m high, 2.15m for the first floor and 1.85m for the second floor. I wish to wish dimensional lumber like 5cm x 5cm and 5cm x 10cm meranti wood for the frame of the tent, and a waterproof polyester+PVC coated fabric for the walls/roof of the tent. I want to incorporate closets and shelving into the...

    $114 (Avg Bid)
    $114 Avg Bid
    12 bids

    I am looking for a skilled freelancer to provide architectural drawings for a sawmill shed and storage room for me. The purpose of this project is both for sawmilling, store cut lumber and house sawmill equipment and tools. The structure is one Storey 16'x30' sawmill shed with a 10'x10' tool storage room. The shed will be built on sloped ground with 6"x6" timber posts anchored onto concrete pier blocks under roof shingles on dual pitch roof trusses. Elevated timber planks flooring with min of 6" ground clearance. The drawings must include details of connection for trusses to post, floor joists to posts, and roof, etc for building permit purposes. The sawmill area will have a...

    $94 (Avg Bid)
    $94 Avg Bid
    17 bids

    Need a logo for our start up micro brewery (a beer brewery ) Name is " Big Joe Brewery" a division of Hill Brothers companies It is based on the song Big Joe Mufferaw by stompin' Tom Connors (on YouTube) Basically a Canadian lumber jack

    $132 (Avg Bid)
    Guaranteed
    $132
    236 entries

    ...ft with 2 bedrooms and 1 bath. The design will also be mirrored on the lower floor so that both floors will be two identical apartments. The building is for a hot, wet tropical climate. Mechanical ventilation is not an option, so there is complete dependence on natural air circulation. The building code requires 2 entrances/exits. There should be 9 columns that measure 9"x 9" and are made of rebar-reinforced concrete. The building envelope and floor are of 8" wooden boards, and the partitions are of sheetrock. For moisture resistance, the bathroom and kitchen areas are to have concrete floors and concrete block work for walls. Staircases are of reinforced concrete. The roof is to be of a shed...

    $143 (Avg Bid)
    $143 Avg Bid
    69 bids

    I am seeking a freelancer who can handle pre-processing of aerial images for detecting scrubs and trees in oil palm plantations using Matlab. The ideal candidate should have experience in color filtering techniques and be able to recommend a suitable method to detect the scrubs and trees. The desired output format for the detected scrubs and trees is an image with marked areas.

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    10 bids

    I need a writer to take my research found a and convert to so my research can be published. Once it is published, then I can maintain on Wikipedia, as new information is discovered. This si an important historical event that no one has researched until I took over the effort. it has taken me 15 ears to uncover what I have thus far.

    $250 - $750
    Sealed
    $250 - $750
    25 bids

    I am looking for someone to create plans and design a patio roof for me. The size of the patio area is 100-300 sq ft and I would like the roof to have a gable structure. I am open to suggestions regarding materials for the roof and I am looking forward to discussing the potential options with the freelancer. I need someone with great attention to detail, creative input and the ability to produce detailed and accurate plans. Need to know what a design will cost Patio Cover 14’ x 20’. My drawings are just an attempt to show what I want. Can it be supported by 4 posts only? Should they be 6x6 of 8x8 posts Roof pitch to match house. 2 ½:12 in rear, 3:12 in front Rafters 24” OC ? Rafters and ri...

    $398 (Avg Bid)
    $398 Avg Bid
    34 bids

    I'm looking for someone to draft a set of plans from a hand drawn sketch that I supplied. Structural certification of the drawings is not required. The desired output of this project is 2D AutoCadCAD drawings. The A.J SITE AND FLOORPLAN source material I provided is a hand drawn sketch, so experience in CAD drafting is a must. Freelancer to provide AutoCAD .dwg and .pdf files of drawing. Accuracy using American framing standards and 1/4"=1'-0" scale is of paramount importance ie: a 2x4 wood lumber = 1.75"x3.5" as these drawings will be used for further construction purposes. CAD details and Plan template will be provided(YOUNG PLAN ATTACHED) to follow and use. plan drawings needed to be produced : 1. si...

    $146 (Avg Bid)
    $146 Avg Bid
    21 bids

    I want to know what size wood beams I would need for this gazebo. It’s a 16ft x 16ft pergola that my customer want to make into a gazebo with a single pitch roof. (Plans attached) The posts are 6x6 treated lumber on concrete footings. I want to know beam & joist sizes and wood kind needed. Project location: Oregon,WI Minimum snow load rating of 40 pounds per square foot (lbs/ft2 )

    $107 (Avg Bid)
    $107 Avg Bid
    45 bids

    I am looking for someone to develop a WOOD FRAMING STRUCTURAL CALCULATION REPORT for a residential building in accordance with local building codes. This report will not need to be certified. The successful candidate will be able to provide technical competence in conventional wood framing and structural calculations using appropriate terminology, code requirements, and best practices. The candidate should have a knowledge of load paths, lumber spans, and the ability to determine appropriate fastener types and sizes. The report should meet all applicable local building codes and include detailed calculations, drawings, and sketches. The completed report should provide a clear and concise explanation of the structural...

    $106 (Avg Bid)
    $106 Avg Bid
    24 bids

    I'm looking for a talented and experienced designer to create a layout design for land. This layout will be used by real Estate Developers, so it needs to be of the highest standard. Specifically, I'm looking for a 2D plan, 3D rendering, and a landscaping design. Additionally, I need to feature specific objects in the layout design —it’s a must. If you have the necessary skills, please contact me. Thank you! I have attached a sample for reference. I need the plan almost the same but professionally refined. INTERNAL ROAD:- 30 Feet Wide Road on the North Side of the Property. Out of the 30 Feet marked for road the following is the breakdown 1) 5 Feet of Landscaping (Treeline) on North Side 2) 20 Feet...

    $119 (Avg Bid)
    $119 Avg Bid
    31 bids

    We are launching a new Safety promotion within our almost 90-year-old company. SLAM (Stop, Look, Assess, Manage) I have attached our current company logos. We are primarily Lumber and Supply but also sell/design carpet, truss, tile, cabinet, door, windows, and fireplaces. We are looking to use this logo design on shirts, banners, and hats within our company of almost 1,000 employees.

    $125 (Avg Bid)
    $125 Avg Bid
    4 bids

    Task: Design product in Solidworks based on the provided link. Models and detail drawings with BOM required. Show hardware Data provided: See link of product to model. Material to be used: Use only standard material available at store only. Additional links provided https://www.amazon.com/Pack-Gas-Spring-Pressure-Hydraulic/dp/B07RTMBC1S/ref=sr_1_4?crid=1F2NBGYXQJY0Y&keywords=cabinet+piston+outdoors&qid=1680036046&refinements=p_72%3A1248909011&rnid=1248907011&s=hi&sprefix=cabinet+piston+outdoors%2Caps%2C112&sr=1-4

    $166 (Avg Bid)
    $166 Avg Bid
    66 bids

    Company is currently looking for a long-term relation ship with a professional landscaping designer, to do designs, 3D renders and plantations. we are looking for expertise persons. If are you good at designing very nice gardens and 3 R rendering and have knowledge about plants then please contact us.

    $439 (Avg Bid)
    $439 Avg Bid
    46 bids
    Trophy icon LumbarBack Logo Design Ended

    I'd like for you to design a logo for a company that specializes in back pain products. LumbarBack is a play on words Lumbar (part of the spine) is supposed to sound like Lumber (chopped wood) so the company name in total is supposed to sound like Lumberjack which is a person who chops down trees. The first product I will be producing is a backpack and I want the logo to be understated, cool, and minimalist. Excited to see what you come up with!

    $100 (Avg Bid)
    Featured Guaranteed
    $100
    955 entries