Plc scada jobs
...that adjusts with high precision the opening between two knives, controlled by Omron NX102-1100 PLC via EtherCAT and EtherNet/IP. Each knife is driven by an Omron 1S servo motor (R88M-1M40030T, 400 W) with R88D-1SN04H-ECT drive and a 10:1 Apex AB060 gearbox. The system includes an HMI (Omron NB/NA) connected over EtherNet/IP for operation, monitoring, and diagnostics. The goal is to achieve and maintain two nominal openings — 400 µm and 700 µm — or a custom value defined by the operator or external PLC. The PLC must continuously calculate the current opening (difference between right and left knife positions), display it on the HMI, and send it in real time via EtherNet/IP to the main line PLC. Safety is critical: any knife motion re...
Im looking for a skilled and experienced PLC and HMI designer to assist with a project I have to deliver. The assistance would be in the form of providing graphical support to the project on the HMI interface which I will develop with the EXOR Jmobile Studio platform. The candidate would need to have strong photoshop, inkscape or alternative skills to produce images, and SVGs for the various graphical elements/icons/buttons and backgrounds. The theme of the HMI interface for the PLC will be a minimalistic industrial style with a medium brightness color palette (Not dark or not light, in between). Knowledge of PLC programming and Javascript would be advantageous but not essential (As I will be doing the PLC programming on the Omron NJ series PLC). ***...
I need a skilled programmer to integrate and control our AHU and BMS systems using Horner. The system should be fully integrated and manage AHU and BMS functionalities. Key Requirements: - PLC programming expertise, especially with Horner - Experience with AHU and BMS systems - Ability to fully integrate multiple control systems Ideal Skills: - Background in building management systems - Proficiency in temperature, humidity, and ventilation control - Strong problem-solving abilities and attention to detail Please provide relevant experience and ensure you can work within the budget.
Assalam o alaikum, I am looking for electrical engineers having expertise in following areas:  Embedded C Programming.  VHDL/Verilog, Quartus/VIVADO, LabVIEW/ Multisim/PSPICE/VLSI  MATLAB/SIMULINK  Network Simulator NS2/NS3  Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC, STM32 and ESP32.  IDEs like Keil MDK V5, ATmel studio and MPLab XC8.  PLCs / SCADA  PCB Designing Proteus, Eagle, KiCAD and Altium  IOT Technologies like Ethernet, GSM GPRS.  HTTP Restful APIs connection for IOT Communications. Actually I have multiple projects in different domains of electrical engineering and I already have a team of engineers working on them but due to workload I am looking for few more engineers to be a part of my team and work with us on regular basis.
I have a Siemens LOGO PLC on my network that speaks Modbus-TCP and I need a clean, well-commented Python script that can both read from and write to its registers using the pyModbusTCP (or compatible) library. The goal is to end up with a small module I can drop into a larger project, so clarity and reliability matter more than flashy UI. Here’s what I expect: • A single .py file that opens the connection to the LOGO (IP, port and slave ID must be easily configurable at the top of the script). • Functions I can call for typical tasks: read_coils, read_holding_registers, write_single_coil, write_single_register (or their pyModbusTCP equivalents). • An example section (under if __name__ == "__main__": ) that demonstrates the above functions in ac...
...Required – Development of Custom SCADA Remote Monitoring System for Solar Plants About Us We are a Solar EPC service provider engaged in Design, Installation, Commissioning, and O&M services for Grid-Connected Solar Power Plants. As part of our digital transformation, we want to develop our own in-house SCADA / Remote Monitoring System for solar plants. Project Objective To design and develop a custom SCADA-based Remote Monitoring System for solar power plants that enables real-time monitoring, analytics, alerts, and reporting. Scope of Work The freelancer will be responsible for end-to-end development, including: 1. Data Acquisition Integration with inverters, meters, weather sensors, SCBs, PLC/RTU Protocols: Modbus RTU / TCP, MQTT, OPC (pr...
I’m rolling out a new control strategy and need a seasoned Omron PLC specialist who can make the controller talk fluently with the rest of our plant-wide software. The priority is integration—linking the Omron PLC to upstream and downstream systems so that real-time data, alarms, and commands move seamlessly between the controller and our supervisory platforms. Whether the target is a SCADA package, an HMI station, or even an ERP layer, the end result must be a robust, well-documented program that plays nicely with standard industrial protocols. Here’s what I expect: • Clean, fully commented ladder or structured-text code (CX-Programmer / Sysmac Studio, as appropriate). • Communication setup and mapping for each external system, includi...
...clients across industry, logistics, hotels, and commercial facilities. We are looking for experienced freelancers to support our projects in the following areas: Areas of Expertise: RFID Access Solutions – industrial facilities, hotels, commercial buildings, machine authorization Radio & Antenna Concepts – LoRa, WLAN, LTE/5G indoor coverage, antenna layout and field planning Automation Concepts – PLC design, process control workflows (planning only, no on-site execution) Robotics Concepts – educational and industrial robot integration, process optimization What We Offer: Remote collaboration across the EU Clear project scope and deliverables Professional, long-term partnerships Requirements: Proven experience in one or more of the areas abo...
I have an Arduino Opta PLC that must act as the Modbus RTU master for two drives—a Siemens SINAMICS V20 and a Power Electronics VFD. The goal is simple: a user touches a Cloud- Arduino touchscreen, enters a ratio such as 30 : 70, presses “Run,” and the PLC then runs each VFD for the correct proportional time slice before repeating or stopping as configured. What I need from you • Ladder-logic code written in the Arduino PLC IDE that handles Modbus polling, ratio calculation, timing, and safe start/stop sequences for both drives. • A detailed step-by-step guide (screenshots encouraged) covering wiring, RS-485 settings, drive parameter maps, code deployment, and how to expand or tweak the timing logic later. Acceptance will be based on:...
Requirements for Developing 21 CFR Part 11 Compliant Software 1. Introduction This report outlines the technical, functional, and regulatory requirements for developing software that is compliant with 21 CFR Part 11, capable of communicating with a Programmable Logic Controller (PLC), displaying real-time process data, and controlling PLC operations. Such software is typically used in FDA-regulated industries including pharmaceuticals, biotechnology, medical devices, and food & beverage manufacturing. The goal is to ensure that the software meets data integrity, security, auditability, and electronic record/electronic signature (ER/ES) requirements while maintaining reliable and secure industrial control system integration. ________________________________________ 2. Over...
I need a skilled programmer to set up sequential control functionalities on our Wonderware SCADA system. Key Requirements: - Expertise in Wonderware SCADA - Experience with sequential control processes - Ability to implement control functionalities Ideal Skills & Experience: - SCADA programming background - Strong problem-solving skills - Attention to detail and accuracy Looking forward to your proposals!
I need a skilled programmer to set up sequential control functionalities on our Wonderware SCADA system. Key Requirements: - Expertise in Wonderware SCADA - Experience with sequential control processes - Ability to implement control functionalities Ideal Skills & Experience: - SCADA programming background - Strong problem-solving skills - Attention to detail and accuracy Looking forward to your proposals!
...clients across industry, logistics, hotels, and commercial facilities. We are looking for experienced freelancers to support our projects in the following areas: Areas of Expertise: RFID Access Solutions – industrial facilities, hotels, commercial buildings, machine authorization Radio & Antenna Concepts – LoRa, WLAN, LTE/5G indoor coverage, antenna layout and field planning Automation Concepts – PLC design, process control workflows (planning only, no on-site execution) Robotics Concepts – educational and industrial robot integration, process optimization What We Offer: Remote collaboration across the EU Clear project scope and deliverables Professional, long-term partnerships Requirements: Proven experience in one or more of the areas abo...
...looking for an Ignition SCADA (v8.3) developer to build a recipe management system using a MySQL backend. The system will interface with a Siemens S7-1510SP PLC (TIA Portal V19). The project involves 6 products sharing one database, where only one product runs at a time. Key Features Required: -Color Selection UI: A visual palette where users pick a color to capture its Hex ID as the database key. -Recipe Management (CRUD): Ability to Create, Save, View, and Edit recipes. Each recipe contains a 23-row matrix of temperature/VLT data. -Interlock Logic: Only one of the 6 products can be in "RUN" mode at a time. Running recipes must be locked from editing or deletion. -PLC Data Handshake: On "Start," Ignition must send only one specific row from th...
...need a knowledgeable partner to walk me through the logic so I can maintain and modify it on my own. The focus is purely on the programming side: ladder logic, function block diagram, and structured text. I’d like you to open the code with me—whether it’s in CX-Programmer, Sysmac Studio, or the tool you prefer—and explain, step by step, how each rung, block, and routine works together. Once the PLC flow is clear, we will turn to the HMI. I need to understand how the screens tie into the tags, how data is visualized, and the principles behind the current interface design. Showing me the navigation structure, tag bindings, and the way trends or numeric displays are configured will be key. By the end of the consultation I want to: • Trace a signal from...
I need a programmer who is already comfortable working with Parker-brand HMIs to build a fresh set of operator screens from the ground up. The project is purely new-screen creation—nothing in the existing interface needs to be modified—so your attention can stay on clean layouts, intuitive navigation, and reliable tag mapping to the PLC. All project files must open natively in the standard Parker development environment (e.g., Interact Xpress or the current Parker software you normally use) so that my in-house team can maintain them later. Once the graphics and logic are in place, I will load everything on the physical unit and verify that every tag, alarm, and button responds correctly; I will rely on you for any tweaks uncovered during that acceptance test. Please sh...
I need to program a PLC to replace failed control boards on hydraulic column lifts for vehicles. Requirements: - Help in selecting the right PLC - Program PLC to make lifts functional Ideal skills and experience: - Experience with Siemens, Allen Bradley, or Mitsubishi PLCs - Knowledge in programming PLCs for hydraulic systems - Background in industrial automation - Familiarity with safety protocols and remote monitoring (a plus) Please provide relevant experience in your bids.
...well on: Business cards Clothing Social media Website Must be supplied in: Vector format (AI, SVG or EPS) Transparent background versions BUSINESS CARD CONTENT Front Logo Tom Gee Automation & Industrial Engineering Contractor +44 7833 430 838 Instagram = BluePeakEngUK Email - Leave empty not made one yet i can fill in myself Services (clean, professional wording) PLC Programming (Siemens TIA Portal & Step 7) PLC Modifications & Optimisation Commissioning & Site Start-Up Factory Acceptance Testing (FAT) Control Panel Testing & Pre-Site Software Installation Industrial Electrical Installations Electrical Fault Finding Mechanical Installation & Integration TIG Welding & Fabrication Design should be clean, modern, and easy to re...
...for precise temperature and humidity control. Scope • Calculate heat load, air changes, and static pressure requirements for the entire vertical footprint. • Develop ductwork and diffuser layouts that keep every aeroponic nozzle supplied with clean, evenly distributed air. • Specify fans, filtration, dehumidification, and control hardware that can be sourced locally and integrated into our PLC. • Provide 2-D drawings and a 3-D model (AutoCAD or Revit MEP) plus a bill of materials. • Include commissioning guidelines and sensor placement to validate performance once installed. Acceptance criteria The design must deliver uniform airflow (±10 %) across all grow levels, maintain 20-25 °C and 55-70 % RH under full load, and fit within t...
...CP1E or CP2E** PLC that: 1. **Sends data through RS-232** whenever any digital input changes 2. **Receives serial commands to control digital outputs** The program must be **final and functional**: open in CX-Programmer, download to PLC, and work **without further testing or adjustments**. ## Functional Requirements * **RS-232, No-Protocol mode** * **115200 baud, 8N1** * Monitor **8 digital inputs** * On any input change: * Send data immediately via serial * Binary format preferred (1 byte or 2 bytes), ASCII also acceptable * Detect changes using comparison (e.g. XOR with previous state) * Include basic debounce/filtering * Receive serial commands to: * Set / reset digital outputs * Simple, robust command format * Must handle noise or invalid frames safely (n...
...with no missing scope or assumptions. Scope of Design (examples, not limited to): Industrial power distribution and site electrical circuits Cable routing, trays, and mechanical protection Power feeds to machines, HVAC, and cooling systems High-current distribution (commercial / industrial scale) Grounding / earthing systems Control circuits, field wiring, and connections to controllers / PLC Coordination between panels, field equipment, and site works Requirements: Industrial-level design only (residential or domestic examples are not acceptable) Drawings must be clear, detailed, and ready for contractor execution The design should demonstrate the ability to plan, coordinate, and implement on site Include enough detail so freelancers can estimate pricing and quantit...
I'm looking for an advanced energy management system specifically designed for electricity utilities. This system should leverage sensors and IoT devices for data collection. Key functionalities should include: - Monitoring consumption in real-time - Billing and invoicing based on accurate data - Fault detection to identify and alert on issues Ideal skills and experience: - PLC programming and HMI UI/UX experience to build. - Expertise in IoT and sensor integration - Strong background in energy management systems - Experience with real-time data processing and analytics - Proficiency in developing user-friendly interfaces for monitoring and reporting Please provide examples of similar projects you have completed.
...current production flow and space constraints (layout drawings and photos provided once we start). • Produce a complete mechanical design for the cuber system—including pallet conveyor interface, pick-and-place mechanism, stacking pattern logic, and safety guarding. • Deliver detailed CAD models, assembly drawings, and a bill of materials ready for procurement and fabrication. • Recommend servo/PLC hardware and control architecture that can integrate with our existing line. • Provide a concise commissioning guide so my in-house team can build and fine-tune the unit. Key points • Focus is strictly on the cuber; elevator or lowerator details are not required at this stage. • Design must keep up with a cycle time of 12–15 second...
...analysis; I want to see the full picture—chemical, microbial, and physical indicators—presented in a way that links directly to operational decisions. Alongside the lab work, I would like you to create (or update) a calibrated hydraulic model of the distribution network in EPANET, WaterGEMS, or another recognized platform so we can test scenarios, pressures, and residual decay. I’ll provide recent SCADA exports, plant logs, GIS layers, and any historic lab reports at project start. Deliverables • Sampling and testing plan covering locations, frequency, and methods • Interpreted lab results with charts, tables, and plain-language findings • Fully functioning hydraulic model file and supporting documentation • Concise, ranked recommend...
I need a PLC program for a bandsaw using a Fatek PLC, complete with an HMI interface. The HMI should control start/stop operations and toggle between automatic and manual modes. Key Requirements: - Automatic mode: start, material clamping, pause - Manual mode: control for coolant, hydraulics, clamping, and motor for lower raise Ideal Skills and Experience: - Proficiency in Fatek PLC programming - Experience in HMI design and integration - Knowledge of bandsaw operations and safety protocols Please provide relevant experience in your bids. Thank you!
Our production line runs on a Siemens PLC that exchanges data with several devices over Ethernet/IP. Lately we keep getting random communication errors that halt the process, yet a simple reboot clears the fault—until it reappears. I need an engineer who knows Siemens hardware and TIA Portal inside-out to pinpoint the root cause, correct the PLC logic or network configuration, and make the problem disappear for good. Here’s exactly what I’m after: • Investigate the communication faults and identify their source, whether it’s in the PLC code, the Ethernet/IP setup, or an external device. • Implement and test the required logic or configuration changes to restore reliable operation. • Supply a brief change log and a tidy set ...
...concept right through to site acceptance. You should be able to own circuit design and analysis work, model and optimise power-system layouts, set up or fine-tune automation and control strategies, and then prove everything in the field during transformer testing and commissioning. If you are already fluent with industry-standard CAD/CAE suites, simulation packages such as ETAP or DIgSILENT, and PLC/SCADA environments, you will fit straight in. • Circuit design & analysis • Power systems engineering • Automation and control systems • Transformer testing & commissioning Alongside this, I also need accomplished sales & marketing executives who understand how to position technical products and services in B2B markets. You will collabo...
Embedded Hardware Engineer – Piezo Impedance Sensor (PLC 0–10V Output) Project Overview We are developing a low-frequency piezoelectric impedance sensor to monitor early-age concrete stiffness (first 10 minutes) for an automated slipforming system. The end result is a single 0–10 V analog signal suitable for direct PLC input (Beckhoff/TwinCAT). This is a real industrial sensor, not a hobby project. ⸻ What This Project IS Electromechanical impedance sensing (EMI / EIS style) Low-frequency operation (1–5 kHz) Piezo disc bonded to steel, sensing boundary stiffness Embedded electronics + analog front end Deterministic, repeatable output for control decisions ⸻ What This Project IS NOT (important) Accelerometers Vibration RMS sensors Ultrasonic we...
Greetings from our PLC Tech Solutions, Bangalore based company. We are seeking freelance sales professionals to collaborate with us on a project basis. For every successfully closed project, the freelancer will receive ₹1,000 to ₹10,000, depending on the project scope. We handle execution; you focus on acquiring clients.
I have a straightforward job: write the PLC logic for a simple access control system that operates one automatic barrier. The barrier must open and close safely based solely on signals coming from detectors (no keypads, cards, or biometrics are involved). Here is what I need from you: • A fully commented PLC program that takes the detector inputs, drives the barrier motor/relay outputs, and handles basic timing, safety interlocks, and fault recovery. • An I/O list that shows every digital / analog point you expect, so my electrician can wire it correctly. • A short explanation of the operating sequence so our maintenance staff can follow the logic without diving into the code. If you can simulate the sequence in TIA Portal, RSLogix, Codesys, or any equivalent...
...features so operators can create and store complex bend sequences directly from the panel. Finally, integrate the HMI with our existing plant systems (network share for programs, upstream ERP link, and the machine’s safety PLC). I will provide remote access to the console or arrange an on-site session, whichever you prefer. Complete documentation and machine drawings are ready for reference. Deliverables: • Commissioned DELEM-51 with all parameters saved • Verified advanced programming functions and sample job proven on the floor • Successful handshake with our network/PLC interfaces • Brief hand-over report listing final settings, steps performed, and any future maintenance notes Share your experience with DELEM or similar CNC/HMI plat...
I have a small lab bench running a Siemens PLC and an Ignition Edge Gateway that still sits on the default settings. I need a programmer who already knows their way around Ignition Edge to turn this blank slate into a working demo environment. Your first task is to configure the gateway itself—licence activation, tag provider, security zones and the usual Edge limitations—so that the PLC’s tags are browsed and exposed cleanly. From there we’ll move straight into scripting and logic: I want lightweight Python scripts inside Ignition to handle calculated tags and to trigger events when certain states occur. Two key features must be delivered: • Robust data-logging of selected PLC tags to the built-in store-and-forward buffer so I can pull hi...
...may involve: -Motor selection or optimization -Torque, speed, and power analysis -Electrical protection and fault handling -Noise, EMI, and thermal considerations 3. Motor Control & Power Electronics -Design or improve motor driver circuitry -Power supply design and filtering -Protection mechanisms (overcurrent, overvoltage, thermal) -Interface compatibility with existing control systems (MCU, PLC, or controller) 4. Environmental & Experimental Considerations -The system must be suitable for: -Continuous or long-term operation -Laboratory and experimental environments -Exposure to environmental variables (temperature, vibration, duty cycles) 5. Manufacturing-Ready Design -The final solution must be: -Ready for physical manufacturing -Based on readily available componen...
More details: Is this project for business or personal use? For starting a new enterprise What information should successful freelancers include in their application? Experience How soon do you need your project completed? ASAP
I have a water-treatment skid that recirculates water through a bank of pumps and an ozone generator, then sends the finished stream to storage tanks. The attached schematic shows the valve logic and motor loads; what I need now is the brains. Task You will select a compact, readily available PLC (or other basic logic controller) that can: • sequence three pumps dedicated to water circulation, • run the ozone generator on a programmable timer, • switch flow to the final storage tanks once ozonisation is complete, • provide hard-wired manual-override switches, and • report simple status via LED indicators (no touchscreen or text LCD). Once the hardware is chosen, write and supply the ladder/structured-text program with annotated source code. Fin...
More details: Is this project for business or personal use? For starting a new enterprise What information should successful freelancers include in their application? Experience How soon do you need your project completed? ASAP
...is a pure recruitment assignment, suitable for recruiters who have experience in industrial, manufacturing, crane, or heavy engineering roles. Position to be Closed Role: EOT Crane Service Technician – Electrical Nature of Work: Electrical maintenance, troubleshooting, and servicing of EOT cranes Field service and breakdown maintenance Panels, drives, limit switches, control systems (basic PLC knowledge preferred) Recruiter Scope of Work Source relevant candidates Shortlist and screen candidates Coordinate interviews Support till candidate joining Naukri Employer Login will be provided for sourcing Recruiter can also use own database / references Payment Terms Payment strictly on successful candidate joining No upfront or sourcing fees Payment will be released...
I need a complete electrical drawing package for a PLC-based control panel whose sole function will be automating machinery on our production floor. The layout must include all power and signal wiring, component placement, terminal numbering, and clearly labelled field I/O so our installation crew can build and commission the cabinet with zero guesswork. Please create: • A schematic set in AutoCAD (or EPLAN if you prefer) that covers incoming power, PLC rack, I/O cards, relays, breakers and safety devices • A front-view panel layout showing DIN-rail spacing, wireways and device tagging • A concise bill of materials with manufacturer part numbers All drawings should follow IEC standards, use my provided title block, and arrive as both native CAD files ...
...for this niche sector. I will supply my current resume and any additional background you need on past projects or certifications. From you I expect: • A polished, ATS-friendly resume delivered in both editable (.docx or Google Docs) and PDF formats • Language and formatting that highlight security expertise within rail or train network environments—think incident response, network hardening, SCADA/ICS familiarity, compliance work, and similar keywords where appropriate • A brief explanation (bullet or comment) of why key changes were made so I understand how to keep the document updated in future If you have direct experience writing for cybersecurity or rail technology roles, mention it; otherwise, show me examples of technical resumes you’ve tr...
I need help configuring a Schneider Electric SCADA environment focused purely on data acquisition and visualization. The system must pull live values from the existing sensors and field devices on our power network, map every tag correctly, and then present that information on intuitive real-time dashboards. You will connect to the PLCs and RTUs, set up the communication drivers supported by Schneider (Modbus/TCP in most cases), and build screens that let operators see voltage, current, breaker status, and alarms at a glance. Historical archiving, complex control logic, or external database links are not in scope; my priority is a rock-solid live view of what the plant is doing right now. Deliverables • Fully configured data acquisition channels and verified point list &b...
...speed and repeatability matter more than raw strength. A fully automated cycle with whatever sensors or vision you feel are necessary is key; the goal is to press a single button and let the line run. You’re free to choose the architecture that best serves a light-duty task: a desktop-scale 6-axis, a SCARA, or another configuration you trust. Whether you prefer ROS, Arduino-based control, or a PLC is up to you, provided the result is stable, safe, and easy for me to support after hand-off. To keep the project clear, here’s what I expect at delivery: A fully automated robotic arm to assemble the product. If you’ve built similar pick-and-place arms for toys or other light products, please mention it; video links or photos of previous builds will help me decid...
...quick-scan site audits and backlink snapshots—yet stay intuitive enough for non-technical users. THIS IS NOT A SEO SERVICE JOB FOR OUR WEBSITES. Core objectives • Tool you will develop shall be a combination of AHREFS, Writesonic, SEMrush & ConsumableAI type services & their features. Please visit their websites before responding. • Specifically serve our industry of manufacturing control, PLC, SCADA applications. • Single web dashboard showing live keyword gaps, SERP feature wins and technical health at a glance • Clean UX that a campaign manager can master in minutes, including exportable reports and shareable links for stakeholders Tech notes I am stack-agnostic as long as the end result is browser-based, responsive, current...
I need a complete PLC application—logic and HMI—that will fully automate both the Ultrafiltration (UF) and Reverse Osmosis (RO) sections of a water-treatment skid. The control scope covers every critical field device on the plant: pumps driven through VFDs, globe and on/off valves, flow meters, level transmitters (LT), level switches (LS), pressure transmitters/switches (PT/PS), and the pH / conductivity probes that protect membrane integrity. The sequence must manage start-up, normal production, back-flush and CIP where relevant, while enforcing interlocks on pressure, level and quality limits. Alarms, trends and manual-override features should be available from an intuitive touch-screen HMI so operators can see live values and step through maintenance modes without ne...
...receive: • A concise feasibility study detailing peak-load forecasts, renewable and conventional generation mix, and regulatory constraints • A preliminary single-line diagram and network layout created in industry tools such as PSS®E, ETAP, or DIgSILENT PowerFactory, exported as DWG/PDF • High-level cost estimates broken down by major components (lines, substations, protection & control, SCADA) with clearly stated assumptions • A phased implementation schedule showing quick-win upgrades as well as long-term expansion milestones • Risk register with mitigation strategies for technical, environmental, and funding challenges Acceptance criteria: every calculation must be traceable to source data, drawings must be fully editable, and the fi...
I need a complete PLC application—logic, HMI and SCADA—that will fully automate both the Ultrafiltration (UF) and Reverse Osmosis (RO) sections of a water-treatment skid. The control scope covers every critical field device on the plant: pumps driven through VFDs, globe and on/off valves, flow meters, level transmitters (LT), level switches (LS), pressure transmitters/switches (PT/PS), and the pH / conductivity probes that protect membrane integrity. The sequence must manage start-up, normal production, back-flush and CIP where relevant, while enforcing interlocks on pressure, level and quality limits. Alarms, trends and manual-override features should be available from an intuitive touch-screen HMI so operators can see live values and step through maintenance mo...
I need a PLC programmer to automate a material handling system for a laser cutter. The machine will be handling metal. Key Requirements: - Programming a CLICK PLC to control: - Material pulling - Material dropping - Need assistance in creating a detailed wiring diagram Ideal Skills and Experience: - Strong experience with CLICK PLCs - Familiarity with automation in metal processing - Ability to create and understand wiring diagrams
...optimization with one clear goal: substantially increase output speed by refining the performance of our robotic arms. Current environment • Multiple six-axis industrial robots (FANUC and ABB) coordinated through a Siemens PLC and a central SCADA layer. • On-prem edge servers running ROS2, real-time EtherCAT, and a custom Python/C++ scheduling service. What I need in this phase 1. Motion-planning logic that minimizes dwell time and overlap conflicts between adjacent robots. 2. A software integration layer—ROS2 or comparable middleware—that feeds live telemetry into the PLC for adaptive cycle-time tuning. 3. Simulation or digital-twin validation (TwinCAT, Process Simulate, or similar) to prove the new timings before we touch the ...
...optimization with one clear goal: substantially increase output speed by refining the performance of our robotic arms. Current environment • Multiple six-axis industrial robots (FANUC and ABB) coordinated through a Siemens PLC and a central SCADA layer. • On-prem edge servers running ROS2, real-time EtherCAT, and a custom Python/C++ scheduling service. What I need in this phase 1. Motion-planning logic that minimizes dwell time and overlap conflicts between adjacent robots. 2. A software integration layer—ROS2 or comparable middleware—that feeds live telemetry into the PLC for adaptive cycle-time tuning. 3. Simulation or digital-twin validation (TwinCAT, Process Simulate, or similar) to prove the new timings before we touch the ...
I need a specialist who can quickly integrate an Omron PLC with an ABB variable-frequency drive to push a manufacturing line toward full process automation. The PLC program is already handling basic I/O, but the drive still operates in stand-alone mode; I want tight, reliable command and feedback between the two so speed set-points, fault signals and status words are exchanged in real time. Because production targets are slipping, the work has to begin right away and finish as soon as technically possible. I am open to remote implementation if you can guide my maintenance team through wiring checks and parameter changes, otherwise I can provide secure remote access to CX-Programmer / Sysmac Studio and the ABB drive’s commissioning tool. Deliverables I expect: •...
