Siemens nx mold design jobs


My recent searches
Filter by:
    Job State
    5,589 siemens nx mold design jobs found, pricing in USD

    ...physical design for a unique foam molded pillow. The use for the pillow is sleeping. The designs we're looking for are not graphic prints but more the physical shape and contour mold design of the foam part of the pillow itself. Here is an example of a pillow design we already make. This is an orthopedic pillow for those with neck pain. We are looking for a different, comfortable pillow design that we can make into a general use molded foam sleeping pillow. There are a lot of bed pillow designs out there on Amazon that are copies of the same 4-5 pillows. We are looking for a shape and overall look in design that is unique and appealing to consumers. This unique pillow design will be

    $300 (Avg Bid)
    Featured Guaranteed
    8 entries

    I am looking for a DeepStream expert who can help me run MultiModel on my Jetson Xavier NX platform. I have already installed DeepStream and all necessary dependencies, so I do not require assistance with installation. The ideal candidate for this project should have experience with DeepStream and MultiModel, as well as expertise in running them on Jetson platforms. for obj_meta in frame_meta.obj_meta_list: tensor_meta = obj_meta.obj_user_meta_list[0].user_meta_data # Extract tensor data tensor_data = tensor_meta.tensor_buffer

    $302 (Avg Bid)
    $302 Avg Bid
    3 bids

    Looking for an experienced injection mold designer who can create a product that is larger than 30 cm. The material requirements for the injection mold are open to suggestions, and the product design is moderate with several parts. Ideal skills and experience for this job include: - Strong knowledge and experience in injection mold design - Ability to work with large product sizes - Familiarity with a variety of materials and their properties - Experience in designing products with several parts - Attention to detail and ability to create intricate designs

    $98 (Avg Bid)
    $98 Avg Bid
    34 bids

    I am in need of a Box Design for Breast milk storage bag that targets new mothers. The box should be large in size, and I am open to any design suggestions as I do not have any specific design elements or branding guidelines to follow. Ideal skills and experience for this job include: - Graphic design experience - Experience in packaging design - Knowledge of the target audience and what appeals to new mothers - Creativity and ability to come up with unique designs - Understanding of the product and its purpose The final design should be eye-catching, informative, and appealing to new mothers. It should also clearly showcase the product and its benefits, while keeping in mind the preferences of our target audience. I will attach my existing ...

    $82 (Avg Bid)
    $82 Avg Bid
    60 bids
    Picto Mold 2 days left

    Hi, got an image of a mold and need a drawline picto, very basic.

    $22 (Avg Bid)
    $22 Avg Bid
    27 bids

    Looking for collaboration from some good responsible, serious software talent. No HMI Configuration work is required and no HMI files will be provided by us. Create some sample HMI files using all the features available in TIA Comfort v16-19 editor files (exclude VBScript completely). Convert them to Unified HMI files using the latest version of migration tool Data2Unified. Some features do not convert. Using TIA Openness, export the Comfort & Unified files to XML. We need you to develop a migration tool in MS Visual Studio latest version C# software that will read data from the Comfort XML, and write/update into Unified HMI XML file programmatically (No manual work. You may write some manual steps to enhance/help with conversion). Some of significant items to convert programmatica...

    $1125 (Avg Bid)
    $1125 Avg Bid
    2 bids
    Trophy icon Elite Equity logo 1 day left

    I am looking for a talented designer to create a logo for m...Equity. The logo should be bold and eye-catching, reflecting the unique nature of our business. As we belong to the "Other" industry, we are looking for a logo that does not necessarily fit into the traditional mold of real estate or finance logos. The main concept behind Elite Equity is custom solutions, so the logo should reflect our commitment to innovation and creativity. Ideal skills and experience for this job include: - Proven experience in designing high-quality, eye-catching logos - Ability to understand and interpret a client's vision and turn it into a tangible design - Familiarity with designing for "Other" industries - Strong communication skills to ensure the final produc...

    $20 (Avg Bid)
    240 entries

    I am looking for a logo to use for my water mitigation company the name is Precision Mitigation and Restoration we service water mold and fire jobs. We would like the colors to be Black, White, Red, and Blue I have attached some examples of logos we like.

    $25 (Avg Bid)
    $25 Avg Bid
    71 bids

    I am looking for a freelancer who can provide me with a 3D data file in STL format for a chocolate bar mold. The ideal freelancer for this project should have experience creating 3D files, and should submit past work along with their application. The project needs to be completed as soon as possible. I need data, which I can sent to 3D printer companies. Further i need a stamp for pressing into the mold.

    $334 (Avg Bid)
    $334 Avg Bid
    51 bids

    I'm looking for a freelancer who can help me with a 5 axis NX-CAM machining operation. The specifics of the operation include milling metal, with a tolerance level of medium (0.1-0.5mm). The exact requirements of the machining operation will be provided to the selected bidder. I'm looking for someone who has experience with 5 axis machining and working with metal materials. If you have experience in this area, please don't hesitate to contact me!

    $158 (Avg Bid)
    $158 Avg Bid
    6 bids

    I am in need of a skilled freelancer to assist with modificatio...approach to achieve my desired outcome. i have a missing ethernet switch that properly connect plc with anther, and need to overcome it, I dont know exactly the problem, i need to run the system Ideal Skills and Experience: - Proficient in programming languages such as Ladder Logic, Structured Text and Function Block Diagram - Experience with hardware upgrades for plc systems - Familiarity with Siemens S300 is preferred ( our type :CPU 317-2DP)&SIMATIC DP, Connection IM 153-1, for ET 200M & others will be provided to awarded person The timeline for completion is flexible, but timely completion is preferred. I am looking for a reliable and efficient freelancer who can provide quality work. Thank you for consi...

    $124 (Avg Bid)
    $124 Avg Bid
    31 bids

    I am looking for a freelancer who can optimize a Yolov7 deepstream int8 model for vehicle detection on visdrone dataset. The ideal candidate should have experience in working with NVIDIA jetson xavier NX GPUs and should be able to achieve accuracy level of 70% and above. The project involves the following requirements: - Optimization for realtime Yolov7 deepstream model for vehicle detection - detection of small objects in visdrone dataset - apply quantization aware training QAT or PQT - document the whole process to replicate this on other dataset - Utilization of NVIDIA GPU for maximum realtime performance - Achieving an accuracy level of 60% on visdrone dataset after quantization - training pytorch model on 1280 x 1280 is available - reparameterization of model is needed to ...

    $488 (Avg Bid)
    $488 Avg Bid
    25 bids

    SIEMENS PLC S7 1200 WITH SIWAREX WP231 FOR WEIGHING ON CONVEYOR (30 M/MIN SPEED) Application is Running Conveyor , line speed 30 M /Min ,we have used WP231 with S7 1200 PLC CPU , 4nos of Load cell(4wire) Through Summing Card. Job Length is 3200mm and Weight 17.5KG based of recipe Selected . we want to capture Actual weight in Running Conveyor at 30M/min speed with tolerance of +/- 100 gram. KINDLY PROVIDE ONLINE SUPPORT ON CHARGABLE BASE

    $334 (Avg Bid)
    $334 Avg Bid
    14 bids

    We plan to recycle our carpet in Singapore and use the recycled polypropylene pellets to produce a chair. I have a design of a chair that needs to be improved and a needs a drawing for the production of an injection mold. Will need to have the drawing in 2 to 3 weeks time. Please contact me if you are able to undertake. Thank you.

    $293 (Avg Bid)
    $293 Avg Bid
    53 bids


    $344 (Avg Bid)
    $344 Avg Bid
    61 bids

    Here are the directions for the essay - Directions Review the case study provided below. In an APA-formatted Word document of at least 550 words, write an essay in which you answer the following four questions: 1. How would you describe the culture of Siemens before Kleinfeld's appointment as CEO? 2. Kleinfeld's leadership style was criticized as being “brash” and “American.” Is that a fair assessment? Why or why not? 3. Do you think the decision to “clean house” in the Siemens executive offices was the right one? Why or why not? 4. What challenges does Peter Löscher face in restoring the company's reputation?

    $27 (Avg Bid)
    $27 Avg Bid
    67 bids

    I have a Python script built on Streamlit that doesn't work properly. The final output is not displayed in the Streamlit frontend (it was working before so not sure why it's not working anymore). Sometimes I add this just: (f"Final template:n{final_template}") Just before my functi...libraries: import os import time from import ThreadPoolExecutor from dotenv import load_dotenv from sentence_transformers import SentenceTransformer from import TfidfVectorizer from import cosine_similarity from tenacity import retry, stop_after_attempt, wait_exponential import openai import streamlit as st import networkx as nx import logging import re from collections import defaultdict I will share more details in private.

    $151 (Avg Bid)
    $151 Avg Bid
    40 bids

    I need someone to write a mold inspection report for me based on my findings and lab results which I will upload

    $103 (Avg Bid)
    $103 Avg Bid
    19 bids

    ...implementing a fuel distribution system. The project aims to monitor and optimize the distribution of fuel from refineries to petrol stations, ensuring accurate allocation to citizens. We require assistance in selecting a suitable international vendor from the options below and preparing a comprehensive plan and presentation based on their solution. Vendors to be considered: Schneider Electric Siemens Honeywell Emerson ABB FuelCloud Fluid Management Technology FuelForce OPW Fuel Management Systems Responsibilities: Conduct a thorough evaluation of our fuel distribution requirements, considering factors such as multiple petrol stations, distribution patterns, and anti-theft measures. Research and analyze the offerings of the mentione...

    $227 (Avg Bid)
    $227 Avg Bid
    12 bids

    3D mold of my fiancé’s head needed to create ice cubes for my bachelorette party haha

    $132 (Avg Bid)
    $132 Avg Bid
    35 bids

    I'm looking for a specialist in SCADA Siemens WinCC programming to help with a project involving a new system. The system is going to be used for manufacturing process control, so it needs to be reliable and programmable. I'm looking for a simple system with basic features; no need for anything overly advanced or complex. The successful freelancer will be in charge of the entire programming process, from scratch.

    $381 (Avg Bid)
    $381 Avg Bid
    19 bids

    I am in need of a freelancer to help me create a Brownie production line in the PLM Siemens plant simulation. I have a complete model of the production line, but it may need some adjustments. The level of detail required for the simulation is a basic overview. As for specific performance metrics or reports, I am not sure and open to suggestions. Ideal Skills and Experience: - Experience with PLM Siemens plant simulation - Knowledge of Brownie production line processes - Ability to adjust and fine-tune virtual models - Experience with generating performance metrics and reports from simulations.

    $73 (Avg Bid)
    $73 Avg Bid
    15 bids

    I am creating a component for a children’s board game. It is a mold of a butt wearing shorts that is meant to be slapped throughout the game. I have supplied a link showing you what the butt should look like, and what it should be modeled after. It is meant to sit flat on the table with the buttocks facing the ceiling. It will be made of 2 or 3 pieces. A plastic hollow shell, a base, and a silicone layer to be laid over the shell. Looking to work with someone to figure out the most effective way to have this product be manufactured.

    $140 (Avg Bid)
    $140 Avg Bid
    23 bids

    EDIT: Please show pictures ONLY of asphalt roofs- no metal or clay roofs. A...and that's the only service we are advertising for. Thanks! Please make me a flyer for asphalt roof cleaning. These flyers will *only* be going to houses who clearly need roof cleaning- so the call to action should be along the lines of "Your roof needs a cleaning!" Some ideas of wording: -Restore the beauty and longevity of your roof with a professional roof cleaning -Rid your roof of algae, mold, and stains. Not only are they unsightly, they can dramatically reduce the life of your roof if left untreated -A Much-Needed Roof Cleaning: The Best Bang for Your Buck to Enhance Your Home's Curb Appeal! -Call Jordan at (716) 266-2980 to schedule a free estimate today! include asphalt cl...

    $10 (Avg Bid)
    101 entries

    ...Medium Range (100-500 meters) Specific Features: Real-time monitoring PLC Communication Protocol: Modbus The ideal candidate should have experience with ESP32, LoRa, and Siemens PLC. They should also have experience with Modbus communication protocol and real-time monitoring. Battery life optimization and data logging skills are a plus. The project involves building a remote and receiver system that can communicate over a medium range. The system should use Modbus communication protocol and allow for real-time monitoring. The remote should be able to send data to the receiver, which should then forward the data to the Siemens PLC. The project will require the use of ESP32 and LoRa to achieve the desired communication range. If you have the skills and experience requir...

    $80 (Avg Bid)
    $80 Avg Bid
    6 bids

    I am looking for a skilled freelancer who can create a 3D silicon mold for me. The mold should be small, with a size of under 3 inches. It should be made from silicone and have moderate detail. The ideal candidate for this project should have experience in 3D modeling and mold making. The following skills are required: - Experience using 3D modeling software - Knowledge of mold making techniques and materials - Attention to detail - Ability to create molds with moderate detail If you have the skills and experience for this project, please apply. I am looking forward to working with you.

    $380 (Avg Bid)
    $380 Avg Bid
    40 bids

    ...some lower level plumbing work. Knowledge of OpenPLCliberary and Simens SiVArc will be advantageous. At the end, this programmatic conversion/upgrade will be mainly autonomous process, generic enough for any Comfort HMI app to migrate to Unify. If you feel there is a solution better than TIA openness, please share that info for mutual discussion. If you can do this, please respond by stating "SIEMENS TIA" as your 1st word. After discussions, you will have the opportunity to rebid with a fixed amount and delivery time. We like to get solution done asap. We shall own all the work you develop, and you will submit all the work done - source codes, supporting docs, testing apps, user manual etc. Please specify any milestones desired (all fully tested bug-free source code, ...

    $40 / hr (Avg Bid)
    $40 / hr Avg Bid
    16 bids

    In reference to the patterns, they are doable however we would need dimensional inform...apply as a 3D texture. Normally the 3D textures are bump maps, or texture maps (reference images) supplied by the customers. In this case, since these are custom patterns, I believe it would be better to have a graphic designer create the texture/bump maps for the handles, and then if the desired result is manufacturing, then those maps can be applied to the handle model create the 3D grips for mold making. It’s not that we can’t make the texture maps, but this is usually for a graphic artist, and I think the most practical way of going about it is getting those patterns made into a texture/bump map, prior to creating 3D geometry. It is in the case of creating it in Solidworks anyway...

    $31 (Avg Bid)
    $31 Avg Bid
    11 bids

    I need to design a drone and assembly using nx siemens. I have a video that has to be followed on how to do it

    $144 (Avg Bid)
    $144 Avg Bid
    10 bids

    ...employers, property managers, and service-providing companies on all aspects of mold across the globe. Responsibilities: Implement a clean, minimalistic, and intuitive design, prioritizing easy navigation, clearly defined sections, and accessible buttons. Use a consistent design language, including a cohesive color scheme, typography, and iconography. Follow platform-specific guidelines (Material Design for Android, Human Interface Guidelines for iOS). Design approximately 25-30 screens, Craft each screen with attention to detail, ensuring optimal usability and aesthetics. Develop high-quality icons, illustrations, and visual elements that are relevant to each screen's purpose and the app's overall theme. Optimize design assets for d...

    $3325 - $6649
    Sealed NDA
    $3325 - $6649
    54 bids

    ...area and I'm looking for a UX expert to help mold the site into a functioning, smooth experience for me and my users. I have most of the domain mapped out for the first phase on this project and its only about 15 components. We've already purchased a UI library that we will expect you to use. We are using React is that is important to you. The most important skill the designer can have is communication. We're working on getting the idea from me to you, to my devs. We need to ensure consistent communication across the board. The designer should have experience in creating responsive designs that work well on both desktop and mobile devices. Key skills for this project include: - User interface design - Graphic design - Responsive design...

    $13 / hr (Avg Bid)
    $13 / hr Avg Bid
    109 bids

    I would like to commission an artist to make a 3d model of a face to be made into a mold to cast a ring. I will include an example of the type of ring I would like to have made. I would like the file to be able to be sent to a jeweler to print into a wax mold on a resin printer. I want to send pictures of a face to use for the ring to make a custom ring of the face in the pictures so I would like to work with an artist who can accurately create a 3d image from the pictures. I am not sure if this is a simple project or not or if the job is big I want talk with a potential artist about how to price the project.

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    13 bids

    I am looking for a robot simulation to create a Robot Simulation with siemens tecnomatix process simulate . I have already created a welding fixture as a 3D model (STP). If you have experience with this software, similar to what is shown in this video tutorial , I have personally created the simulation using Fanuc Roboguide. Here is an example in the form of a video. I would greatly appreciate your support. Attached you will find photos of the project and the welding fixture. The ideal candidate should have experience with Siemens Tecnomatix Process Simulate software. The project will involve the following: - Creating a robot simulation - Siemens Tecnomatix Process Simulate software for the simulation - ARC Welding Skills required

    $122 (Avg Bid)
    $122 Avg Bid
    6 bids

    Perform structural inspections of exterior stairways and balconies. Write a report on each element. During inspection: Identify dry rot, water damage, corrosion, structurally compromised elements. Identify indications of pest infestation (not a full pest inspection). Identify indications of mold. In the report: Describe the current physical condition of the load-bearing components and associated waterproofing system. Describe the expected future performance and useful life of the load-bearing components and associated waterproofing system. Provide recommendations for any necessary repair or replacement. Stamp report with your Licensed Structural Engineer's stamp or Licensed Architect's stamp. More similar projects may come in the future

    $1500 - $3000
    $1500 - $3000
    0 bids

    I'm looking for an experienced freelancer to help me with my PLC SEIMENS OBJECT SORTING PROJECT. This project will involve creating a working Full HMI system. The freelancer must be experienced with Siemens TIA Portal, as this is the specified PLC software that I need. The Full HMI system should have a detailed, finished design and will be the final product of this project. Any experience in the Siemens TIA Portal software is a IR sensor must detect object also the budget is between 600 to 1000

    $61 (Avg Bid)
    $61 Avg Bid
    13 bids

    "I have a project that requires an experienced die designer to create a progressive die suitable for metal materials. The desired complexity level of the design is moderate, and I do have specific measurements and specifications for the die. In order to be considered for this project, the designer must have expertise in creating dies and understand the nuances of working with metal materials. Proficiency in CAD software such as Siemens NX is also desirable. If you are confident in your ability to craft a precise and impressive die to meet and exceed my expectations, please feel free to contact me with your portfolio and experience."

    $2024 (Avg Bid)
    $2024 Avg Bid
    17 bids

    I am in urgent need of a Siemens PLC developer with 3-6+ years of experience. I require someone who has experience working with Siemens PLCs and can complete the following tasks: - Programming - Troubleshooting - Installation/Commissioning The timeline for completing this project is less than a week. Ideal skills and experience for this job include: - 3-6+ years of experience working with Siemens PLCs - Knowledge of programming, troubleshooting, and installation/commissioning - Experience working under tight deadlines - Strong communication skills and ability to work collaboratively with other team members.

    $1723 (Avg Bid)
    $1723 Avg Bid
    20 bids

    I am looking for a freelancer to design a 3D object for me. The object I need is a freshwater eel and I have a specific concept in mind. The detail level needs to be standard and I'm confident that the right freelancer can take my ideas and turn it into reality. The finished object will be used for creating a soft plastic bait mold. My preference is to have the final drawing saved to a Rhino 3d drawing so that I can make modifications to it if need be. I also use Fusion 360, but my preference is Rhino 3d Very Important, the final object drawing needs to be a Closed Solid Polysurface so that I can take this object and create a cutout on another solid object ( a mold plate ) This project is perfect for anyone who is experienced in 3D object drawing. I have atta...

    $19 / hr (Avg Bid)
    $19 / hr Avg Bid
    46 bids

    For the design and mold of first text.

    $69 (Avg Bid)
    $69 Avg Bid
    1 bids

    I am looking at creating a series of resin sculptures and then molds of them to manufacture for sale online I want to turn my tattoo into a 3D sculpture - see attached. So ‘Amare et amari’ is written in a way to become a sculpture similar to the L...creating a series of resin sculptures and then molds of them to manufacture for sale online I want to turn my tattoo into a 3D sculpture - see attached. So ‘Amare et amari’ is written in a way to become a sculpture similar to the Life is Beautiful one i also want the sculpture in other languages: To love and to be loved Aîmer et être aimé Amar y ser amado Etc Initially, I need 1 per language plus 1 mold, so English, Latin, French, Spanish, Italian. So 5 Sculptures and 5 molds. Molds would n...

    $490 (Avg Bid)
    $490 Avg Bid
    26 bids

    ...using Nylon carbon fiber for production as well as negatives to be used as a compression mold for reproduction in traditional carbon fiber and forged carbon fiber chop. I would like to start with the peremeter of the piece that can be interchanged thorught out the vehicle as a test run before all four individual door pieces are moved forward with design so that i cn test for proof of concept before moving on to full production sets I can provide an original piece to the designer for reference as well as all measurments pictures and design. This does not need to be a perfect copy of the original part structurally, however I do need them to be visually accurate and true to the original cosmetic design and pieces. The original pieces were made of ABS plastic ...

    $1125 (Avg Bid)
    $1125 Avg Bid
    24 bids

    ...available. I’d like to know my rights for my landlord in the Philippines. Apartment maintenance problems complaints as follows in Appendix Landlord: Dylan A (Filipino) Tenant: B Park (South Korean) We request Landlord to respond to the complaint letter within 14 days. Signature __________________________ APPENDIX Final Checklist for Complaint to Landlord Not honoring contract Mold, Fungus (Fully Furnished apartment - all furniture is damaged and/or unhygienic) Negligence Illness from poor environment Unsafe Unsanitary living conditions Emotional damage for 6 months Negative Business Damage & impacts to my business Extra expenses for house: Deep cleaning, Etc. Threatening (please pay for the monthly rental payment for April 22 to May 21 Beca...

    $24 (Avg Bid)
    $24 Avg Bid
    7 bids

    I'm looking for an experienced game developer to modify a medium-sized, SwordieMS Windows Private Server RPG game with existing files. Either thru the files directly(grabbing the file from me) or Teamviewer. Modifications required: 1. Runs "offline" and can create accounts 2. Show how to modify drop rate and meso rate/ or just modify 3. Modification of In-game currency including NX dropped from mobs and item damages etc. 4. Allow shops in "Free Market" to sell late game items all in the currency mesos. 5. Increase spawn rate "Globally" 6. Make sure job advancements work for all classes 7. Can play and test the game. 8. Put all lvl 140+ items to be accessible from the "freemarket map" 9. All maps have no level access restriction but que...

    $84 (Avg Bid)
    $84 Avg Bid
    6 bids

    I need a Mold for Card reader same as attachement

    $127 (Avg Bid)
    $127 Avg Bid
    41 bids

    I am seeking a talented freelancer to design a plastic mold for gym weight products. The mold will be used to create gym weights and the molds will be plastic and include 3d features, such as finger grooves and raised text. I am looking for a medium-sized mold that is suitable for manufacturing gym weight products. Here is a link to a basic set for sell at Amazon. Ideally there would be 3 a 10lb, 25lb, and 45lb mold. BETONEX 5 pcs DIY Concrete Weight Plates Mold Set Plastic ABS 2mm - Concrete Weight Molds Olympic - Cement Weight Mold Plate - DIY Barbell Weights Molds Plates Concrete Discs Lifting Dumbbell

    $44 (Avg Bid)
    25 entries