Tcpip jobs
...heat pump. It should have capabilities like: - Controlling Temperature: Main feature I require is the ability of the thermostat to manage and control a temperature range of 20°C - 65°C for the outlet of heat pump ( temperature modulation ) something like a smart room thermostat who read outdoor and indoor temperature and change outlet flow temperature for heat pump. - Data: Tuya and modbus tcpip - Remote Control: The thermostat should've remote control functionality to make adjustments from anywhere. - Platform Compatibility: The software should be compatible with Python ,Home Assistant and Raspberry Pi for easy integration into my existing system. Ideal candidates will have expertise in data monitoring, software design for Python, Raspberry Pi, Home Assista...
...library support for both the STM32 and GSM module in the code. The freelancer for this project should have previous experience in working with STM32 or GSM modules, as well as expertise in C coding. I have a stm32 discovery board(STMF407G_DISC1) and SIMCOM A7670 I need to make the functional code so that the micro does the following: configure the GSM card with AT commands, create a TCPIP server socket and another TCPIP client socket and send some information for test it, detect when the GSM module is disconnected and reconnect it again. In this project, interrupt or DMA methods must be used so that the microprocessor can do more tasks in parallel. I will choose a freelancer for this project who has an STM32 development board and a SIMCOM GSM module. The tests have to be c...
I am in need of experienced C coding services for a project involving an STM32 and GSM module. The code must be written in C and should be optimized to function most efficiently. Al...support for both the STM32 and GSM module in the code. The freelancer for this project should have previous experience in working with STM32 or GSM modules, as well as expertise in C coding. I have a stm32 discovery board(STMF407G_DISC1) and SIMCOM A7XXX. I need to make the functional code so that the micro does the following: configure the GSM card with AT commands, create a TCPIP server socket and another TCPIP client socket and send some information for test it, detect when the SIM card is disconnected and reconnect it again. Please contact me if you have any further questions about the pr...
I am in need of experienced C coding services for a project involving an STM32 and GSM module. The code must be written in C and should be optimized to function most efficiently. Al...support for both the STM32 and GSM module in the code. The freelancer for this project should have previous experience in working with STM32 or GSM modules, as well as expertise in C coding. I have a stm32 discovery board(STMF407G_DISC1) and SIMCOM A7XXX. I need to make the functional code so that the micro does the following: configure the GSM card with AT commands, create a TCPIP server socket and another TCPIP client socket and send some information for test it, detect when the SIM card is disconnected and reconnect it again. Please contact me if you have any further questions about the pr...
I am looking for a developer who is experienced in working with Modbus RTU and Modbus TCP/IP protocol. The project involves inserting and sending data via MySQL and PHP. Preferred Development Environment: The client has specific tools and technologies in mind for this project. Data Insertion and Sending Frequency: The data will need to be inserted and sent in real-time as well as at specific intervals. Skills and Experience Required: - Strong knowledge and experience with Modbus RTU and Modbus TCP/IP protocol - Proficiency in MySQL and PHP - Experience with real-time data insertion and sending - Familiarity with working in a specific development environment as per the client's requirements.
I want to communicate with a Logic controller (Phoenix Contact make) ILC 131 ETH, the controller stores the values in an array from 1 to 100 and reads the database of an array from 101 to 250 (this is for instance only). Read & write from and to the controller using TCP/IP Ethernet protocol. I need to get it communicated to our vb.net project, read and write both. In the logic controller, we have assigned the IP of PC, and the logic controller has its own static IP. I should be able to read the array to my .net project continuously e.g. each 500 ms the data should be refreshed so that it will be like live data viewing (streaming). if you need any further information, kindly revert I will be glad to share with you. the project should be in .net and with source code as well.
...the BLE communication in the speed of 2400 bytes per second. we have several different hardware devices. The app run FFT mathematical formula calculation and doing a lot of logic and artifact corrections on the income data, display signals as charts graphs on the screen, transmit raw data and analysis data locally to port 8080 and also communicate a lot with remote server and transmit data to our tcpip server. I need to convert this existing Android APP to iPhone. The new solution must be 100% identical to the existing Android APP. The project will be considered as finished only when the new APP will work 100% identical to the Android APP and will be already uploaded to APPLE Store. This job is only for IOS / ANDROID experts that already know how to do reverse engineering to exis...
...the BLE communication in the speed of 2400 bytes per second. we have several different hardware devices. The app run FFT mathematical formula calculation and doing a lot of logic and artifact corrections on the income data, display signals as charts graphs on the screen, transmit raw data and analysis data locally to port 8080 and also communicate a lot with remote server and transmit data to our tcpip server. I need to convert this existing Android APP to iPhone. The new solution must be 100% identical to the existing Android APP. The project will be considered as finished only when the new APP will work 100% identical to the Android APP and will be already uploaded to APPLE Store. This job is only for IOS / ANDROID experts that already know how to do reverse engineering to e...
Need help with a Multimedia Networking Quiz which is purely academic. Will provide a bunch of Quiz questions that will touch on: - TCPIP / IPv4 - ADSL / Broadband - QoS - Bandwidth / Quantization - Huffman coding
Hi, I would like to create a tcp/ip socket in SAP PI to connect with a third party . this will act a s custom java adaptor in PI. If some one had experience in building custom java adaptors in PI please let me know. eg as below :-
i am looking for the follwing requirements : 1- swift Microphone class ( similar to Android AudioRecord) with following functionality : - record audio voice data and store it into Int16 ( cshort) and int8 (byte) arrays so i can later on use the int16 array for further processing , or also send the byte array data over the tcpip network. - it must use sample rate of 8000 hz( so i can use it for android devices ) 2- play back audio on IOS device from Int16 array or Int8 array ( similar to Andoid AudioTrack) - audio play back must use sample rate of 8000 hz (8k) ( audio data will be comming from both android or iphone through the network) - i needed it to be in int16 array as i am going to use it in speex encoder / decoder , that work i am going to do ...
I want to communicate with a Logic controller (Phoenix Contact make) ILC 131 ETH, the controller stores the values in an array from 1 to 100 and reads the database of an array from 101 to 250 (this is for instance only). Read & write from and to the controller using TCP/IP Ethernet protocol. I need to get it communicated to our vb.net project, read and write both. In the logic controller, we have assigned the IP of PC, and the logic controller has its own static IP. I should be able to read the array to my .net project continuously e.g. each 500 ms the data should be refreshed so that it will be like live data viewing. if you need any further information, kindly revert I will be glad to share with you. the project should be in .net and with source code as well.
I am in need with someone with 30 years or more experience with very old code. C and C++ code. This will involve some very technical TCPIP and sockets. The original sockets developed in version NT 4.0 or windows. I really need someone with serious technical and socket skills. I have a project that needs some changes made to it.
The task is to develop a web system, to mirror the android screen as a remote connection. Using TCPIP. Inserting some functions. It's a long job. Please only those who have experience with Android mirroring. I have an emergency, work immediately.
Hello, I want to do a GPS tracking device using the A9G GSM module. We need 1. TCPIP sends GPS data. 2. TCPIP receives Data. 3. GPIO IN and Out (multi PIN.) I give you the SDK link. I will help with the compiler setup. so 1st check the below links. (Doc) Project details in Chat. Thanks Sanjib
I need a program that can pass a scanned output value from keyence sr1000 barcode scanners to salesforce and create or update a record. This integration/salesforce record update must be as near real time as possible. Preferably within under 10 seconds of scanning the barcode. Keyence offers a basic program that co...integration/salesforce record update must be as near real time as possible. Preferably within under 10 seconds of scanning the barcode. Keyence offers a basic program that could be used as a start. Currently the keyence scanners pass the scanned values to a excel file on a internal server. Keyence also can pass the values using tcpip.
I'm Facing the issue of windows server 2019 active directory sync. i don't i know whats happening with it, please help me out Error -1 "The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchron...
We are lloking to get a programmer to create a QT UI for a smart thermostat. We need button interface, temp sensor reading and a comms to a tcpip reader on a server,we cn use a sandbox totest.
I have an stm32f107 developer board . I want a program for control by tcpip and web ui for led or relay control. also I want tcpip and http protocol Simultaneously.
I want to build chrome extension to extract child elements from a user specified div and forward them one by one on a local port using tcpip connection. Another application (not part of the project) will process and use that data. Website address, parent div class name, IP address and port should be configurable. There can be multiple sites that can be configured and rest of the parameters will be per site
Data from TCP/IP port received in 1768 board to be converted to SPI protocol and connect SPI output to P10 LED board. Code to be shared on project completion
hi,I have developed software on windows ,using usb dongle to connect to BLE based hardware. if you are more interested about the specific dongle , you can check I hope someone can help me develop usb dongle over tcp ip solution , my software will run on workstation comp... I hope someone can help me develop usb dongle over tcp ip solution , my software will run on workstation computer A, the usb dongle will plug into a client win10 ,which is computer B, it will appear on my software as usb dongle ,althought it is not plugged in my computer A you can google " usb server " or "usb over tcpip" ,I think that's what I need
hello there, I need help with this assignment, this is labtainer tcpip project, need someone to explain it to me.
We have some tablets that ca mesure body thermal temperature and which are runnning android. We need to be able to control the screen over the wifi and or the internet. We need to put focus on create an installation file easy to install. Low latency. So far we have been able to use scrcpy and it works perfectly for what we need, but the installation is too complicated. To be ablet to run adb tcpip 5555 you have to have an android device connected over usb. We tried to create a virtual device, it works. But it is still too complicated. If you could find a solution, that would be great. It has to be easy to install and low latency.
Can you program freerRTOS + TCPIP stack on PIC32MX microntrollers?
I need an application which can read the data on network port. best part is that i have the code for that but i need a special help . The project is getting continuous data . I need that only single record should be received whenever the sender sends and it should get only the single record.
I need one android app, normaly this app waiting the data from TCPIP protocol and when receive phone number and message text immediatly send one message (WhatsApp) to the number received, after that still waiting for one other phone number and message text. Only that not other only configuration that must be possible is to set the IP address and port
I want a free lancer who can desing the SCADA for the Solar Project. I am Using a controller work on TCPIP Protocol. I just want the Data come from the controller shown on the compuer screen, and generate the report on monthly basis. You can used any SCADA free software.
Time and Attendance system with RTC, RFID, WIFI, TCPIP, FInger Print based on IOT oled display between 4 to 5 Inch, touch Keyboard, battery charging Indication,
A renowned organization is interested to work with freelance developers that have previous working experience with C / C++ and JAVA Web Development. We would be working together for a time period of six (6) months, during this time any required information (regarding the projects) shall be shared with the developer. The proj...have previous working experience with C / C++ and JAVA Web Development. We would be working together for a time period of six (6) months, during this time any required information (regarding the projects) shall be shared with the developer. The project we will be working on is a Call Recording Software (Compatibility with Various PABX Systems, Cisco, Avaya, Panasonic etc.). Protocols: SIP H323 RTP TCPIP UDP Tool WinPcap Voice Decoder: GSM – G711 &ndash...
...com/code/java/methods/ 4). Port scanner 1). xamarin android port scanner example 2). 3). 4). 5). 6). Bonjour 1). 2). 3). (its for android
Looking for Full time .Net Core , Angular Full Stack Developer for our Traffic and Transport Project in Hyderabad. Skills Required: Asp.Net Core Web API , Entity Framework , Rabbit MQ, Angular, Leaflet Maps, Signal R, TCPIP Programming, Micro services , Network Programming, Hardware Integration. Also Developer must be ready to travel to Hyderabad for Hardware Integration , System Testing and Deployment.
looking for dedicated developer that can and want to work full time , that's 5 days a week 8 hours a day. work will include developing tcpip based apps and maintaining existing ones. develop using python 3 develop using git , daily commits developer needs to be able to work alone and find solutions for complicated problems but also be able to work as part of a team developing complex software. must be accessible [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions]
...Server. 7) Application must be able to handle 800, 200 & 400 messages. Only 800 message will be answer between Server and Application. 200 & 400 messages will be parse and build between Application and Client. Programming: 1) VB.Net .Net Core 2 or latest .Net Framework 4.7.X 2) Initialization a) Application will act as a tcpip client, connect to the Server. Must be able to handle Multithread Environment. b) Server will wait for incoming connection. c) Client will act as a tcpip client, connect to the Application. Must be able to handle Multithread Environment. 3) Initialization File a) Only allow incoming client connection. b) Only allow to a Server connection. 4) Reconnect: Application must be able to reconnect to Server if (1) a test data is sent and no response...
I have a very simple but complicated port listener. It listens for winsock on a specific port and then transfers the connection to a dll that actually uses the handle and connection. It has a bug and I cannot find it. The processes end up being orphans and the exe runs but shuts down. I need someone to put in some code that will write a log file when this happens and h...the connection to a dll that actually uses the handle and connection. It has a bug and I cannot find it. The processes end up being orphans and the exe runs but shuts down. I need someone to put in some code that will write a log file when this happens and hopefully find the problem. This will at least give me an idea where to look. This will take someone with and expert knowledge of winsock,TCPIP and c++ pr...
Create a web application to read a device using modbus protocol ( RS485 / TCPIP) and insert the data to SQL Server / MySQL and show the data as real time data and historical data in graphic. Skill needed: SQL, MYSQL, Modbus Protocol, HTML, Javascript Preferable live in Jakarta Indonesia area
Change DataBasePath Value Inside [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpipParameters] Using C# . But first of all create a Everyone Group In Tcpip.
...400 data to the Application. 4) Application will parse ISO8583 BASE 24 - message 200 & 400 and convert to Fixed Width. 5) Client will respond Fixed Width message to the Application. 6) Application will parse ISO8583 BASE 24 and send it to Server. Requisites: 1) Using latest Microsoft .Net Core 2. 2) Initialization a) Application will act as a tcpip client, connect to the Server. b) Server will wait for incoming connection. c) Client will act as a tcpip client, connect to the Application. 3) Initialization File a) Only allow incoming client connection. b) Only allow to a Server connection. 4) Reconnect: Application must be able to reconnect to Server if (1) a test data is sent and no response is get or (2) connection is idle. 5) Control Idle: Application must be able t...
I want to communicate with a Logic controller (Phoenix Contact make) ILC 131 ETH, the controller stores the values in an array from 1 to 100 and reads the database of an array from 101 to 250 (this is for instance only). I need to get it communicated to our vb.net project, read and write both. In the logic controller, we have assigned the IP of PC, and the logic controller has its own static IP. I should be able to read the array to my .net project continuously e.g. each 500 ms the data should be refreshed so that it will be like live data viewing. if you need any further information, kindly revert I will be glad to share with you. the project should be in .net and with source code as well.
I need a Windows 10 application made that will measure the communication latency between two systems on a TCPIP based network.
Riverbed Skills Requirement Certification Requirement – RCSP-W Require the following Basic Technical Skills TCPIP Addressing – Subnetting – Routing – switching - MTU analysis and packet segmentation Application Port Awareness Ability to read TCP Trace files Require the following Riverbed Technical Skills Advanced Steelhead Configuration Including the following Networking Setup – Primary/Aux, InPath, HA when applicable, ILO Sites and Networks Definitions for Path Selection and QoS Application level Path Selection Optimization Setup – Assumption that SMB1/2/3, MAPI, HTTP, SSL, Citrix is being optimized now. Analysis of existing system logs to determine best configuration InPath and Peering Rule creation and troubleshooting Administrative Code U...
Hi, I have created a number of lighting display projects around my home that use Arduino Nano boards and various LEDs strings . I now want to create an app and a central Arduino hardware system that will connect to each of my existing projects via wi-fi, so that I can control each lighting ...envisage wiring in one of these to each of my existing nano based projects. I will then have a brand new arduino system, also with a wifi to act as the central server or co-ordinator. Each of the other systems will need to connect to this over my home wifi and then they can exchange information (simple stuff, like a few integer values to represent statuses, etc. I have no experience with wifi or tcpip etc or using these esp8266 boards. I need someone to lead me through with sample code. a...
I would like to have an Android app designed to give me a few buttons per page, with 4 pages, where I can send different Hex commands over TCPIP.
...working fine under Linux but not the database connection. Under Windows we use to connect to the database, but under Linux this package is not useable. Tried to use but we get an error, that the database is not found. I think there is something wrong with the connection string. The connection string under Windows looks like this: "ENG=SERVER;Links=tcpip;UID=Username;PWD=password;DBN=NAME;DBF=C:PathToTheDBFILE" As you can see there is no need to give any IP or something like that. "ENG=SERVER" is the name of the database Server not the FQDN. So somehow iAnywhere knows how to find the right way to the server. The connection string under Linux looks like this: Data Source=;Port=2638;UID=Username;PWD=password;Database=NAME Here
...working fine under Linux but not the database connection. Under Windows we use to connect to the database, but under Linux this package is not useable. Tried to use but we get an error, that the database is not found. I think there is something wrong with the connection string. The connection string under Windows looks like this: "ENG=SERVER;Links=tcpip;UID=Username;PWD=password;DBN=NAME;DBF=C:PathToTheDBFILE" As you can see there is no need to give any IP or something like that. "ENG=SERVER" is the name of the database Server not the FQDN. So somehow iAnywhere knows how to find the right way to the server. The connection string under Linux looks like this: Data Source=;Port=2638;UID=Username;PWD=password;Database=NAME Here
I want the installation script with admin right & allow me to edit 1. Domain NameUserName 2. Printer Driver 3. Printer Name 4. Printer IP Address The script must also include the followings when it runs 5. If same IP address found, use an existing port 6. Replace the current driver detected by Windows 7. Do not share this printer 8. Message prompt after installation completed * Must be compatible to run on Win 7 and Win 10 client
Advantis, LLC () is in the remote monitoring and control business for 12 years. We design, program, and manufacture our equipment and Host the user application on Azure. We are behind in programming and need this and some additional help on other projects that relate to this if it works out well. We are in process of converting to TCPIP with a new modem and need the existing socket modified to handle both TCPIP and the existing UDP. The socket interacts with the field microprocessor and reads/writes data to the SQL db.
