we are looking for someone to design a combination metal sheer and press brake. You must be able to do the following:
Take our basic design and engineer it in solid works
You must have solidworks 2010
you must have an understanding of hydraulic systems
you must be able to perform stress analysis on parts to make sure they wont fail
you will need to design it so it is built using off the shelf part ie. bolts bearings ext
design using mostly flat cut steel parts that will bolt or weld together to form structure.
you will also need to sign a non disclosure agreement
Specifications on the unit:
will have a 50" wide press brake die on top and a 54" opening so there will be 2" on each side
will have a 50" sheer on bottom.
brake and sheer will be linked together so they both move at the same time
will need to have a back gauge incorporated that will be operated with a manual crank from front side
main frame will be made from 1-1/4" thick flame cut steel plate
will have 1 5" diameter piston hydraulic ram rated at 3000 psi
will use leverage as shown in pictures to transfer force from ram to downward force
will have a rated downward force of 100 tons
if you have any question or need any clarification please contact us.
I meet all the requierements for your project . I'm sldw certified. I think your project is huge as I will work alone! But I will do it If you trust on me.