Find Jobs
Hire Freelancers

ARM BASED H/W WITH LINUX/WIN CE/ANDROID

$1500-3000 USD

Closed
Posted about 12 years ago

$1500-3000 USD

Paid on delivery
WE ARE LOOKING FOR FREELANCER CAPABLE OF DESIGNING HARDWARE FOR HANDHELD TERMINAL WITH FOLLOWING SPECIFICATION: Processor High Power 32Bit ARM 9 OR 11 Flash Memory 256MB - extendable upto 2GB RAM Memory 128MB OR HIGHER USB Memory Stick Memory capacity upto 4GB SD Memory Card Memory capacity upto 2GB Operating Firmware Operating Firmware Embedded Linux Operating System/Windows CE /Android Display Type TFT 3.5" QVGA 320 x 240 Resolutions with 16Bpp Transmissive, Landscape Mode, TFT and adjustable LED Backlight. 4 Wire Resistive Touch Screen Capability Indicator Charging status indicating BiColor LED Printer Integrated printer 2" Thermal Printer with printing speed @ 55mm/Sec. Photo/Image Printing and 1D Barcode Printing Data Capture Key Pad Details 40 Soft Rubber Keys in QWERTY key format Bar code Reader compact high performance bi-linear CCD bar code scanner 1D (min 4mil) -compliance to Code 39, Full ASCII Code 39, Code 32, Code 128, Code 93,Code 11, Codabar/NW7, All UPC/EAN/JAN code (EAN-13,EAN-8, UPC-A, UPC-E, EAN-128), Interleave 2 of 5, STD 2 of 5, Industrial 2 of 5, matrix 2 of 5, Chinese Postage Code, IATA, MSI/PLESSY, Italian Pharmacy Code, Industrial 2 of 5, BC-412 13.56Mhz RFID Reader RFID reader /writer 13.56Mhz - Compliance to ISO15693, ISO 14443A/B, ISO18000-2 GPS It is a high performance GPS receivere module featuring with weak signal acquisition technology Camera VGA Image (640 x 480) in JPEG format. Video recording at 30 Frames/Sec. Finger print Active Capacitive Fingerprint sensing with high resolution(508 dpi) with Algorithm for Matching 1:1 and 1:N. Active area 256 x 360 pixel (12.8 x 18.0 mm). Air ESD resistance up to (+ or -)15kV. Thick coat. Compliance with FIPS 201. Data Communication USB Support USB 2.0 Full speed Host/Device Ethernet standard IEEE 802.3 @ 10/100 MB / Sec Serial Com Port UART at desirable baud rate. (as debug communication) Bluetooth IEEE Standard 802.15.1 WiFi 802.11 b/g - Speed 11MB/54 MB per second,Internal Antenna, Frequency: 2.4 to 2.5Ghz, Output Power: 100mW US and International GPRS QUAD Band GSM for wide Coverage and global access with GPRS Multislot Class 10, Class B with TCP/IP communication Protocol and With Internal Antenna RF 2.4Ghz Communication Built-in 2.4Ghz Radio for other Short range External Device interface with Proprietary Protocol and with PCB antenna Range: 5 to 10 meters Security SAM Card Interface Available - ISO7816 Compilance Battery Battery Type 7.4V/2800mAh Lithium Ion battery with Protection circuit With Fast Charging Time 4 to 4.5 hrs Timer Real Time Clock In built RTC with 3V Coin Lithium battery Audio Audio Support MP3 recording and Playback @ desirable bit rate. Mono tone Buzzer WHAT WE EXPECT: WE EXPECT THE BIDDER TO MENTION HIS STRENGTH AND DELIVERABLES ALONG WITH TIME LINE AND RELEVANT EXPERIENCE IN DOING SIMILAR PROJECT
Project ID: 1373367

About the project

10 proposals
Remote project
Active 12 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
10 freelancers are bidding on average $6,750 USD for this job
User Avatar
Engineers design and working of little or complex electronics equipments. Specialist Engineers and working for more of 30 year Please see portfolio
$6,000 USD in 90 days
4.7 (17 reviews)
5.0
5.0
User Avatar
Hi, I am Electronics Engineer with 9 years experience in development, design, programing, prototyping and testing of electronic products. Can I be the hardware supplier in a few days and for low cost. If you have questions please contact-me by a email. Best Regards Adriano
$3,000 USD in 30 days
4.4 (1 review)
3.9
3.9
User Avatar
Check you PMB.
$3,500 USD in 90 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Please check your PM
$6,000 USD in 60 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Please see the PM.
$3,000 USD in 60 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Dear Sir, As per your details, your hardware needs 1 ARM11 Processor as well as one supportive co-processor. All Specification will require strong kernels but light weight RTOS therefore we shall need linux to use.
$12,500 USD in 120 days
0.0 (0 reviews)
0.0
0.0
User Avatar
HI, I have designed many ARM-9 processor to be used as low cost-space-consumption embedded processor. I used the ATMEL and Cirrus Logic in the past and now I am using the TI newest processor. For sure I can do this thank you maurizio stefani
$4,000 USD in 60 days
0.0 (0 reviews)
0.0
0.0
User Avatar
We have Interested in complete this project. No False Promise Just Simple And Honest Effort To Success.
$2,500 USD in 30 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, Please check pm for details. regards
$2,000 USD in 30 days
0.0 (0 reviews)
0.0
0.0
User Avatar
This kind of tasks are my daily work.
$25,000 USD in 180 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of INDIA
India
0.0
0
Member since Jan 6, 2012

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.