I need an arduino sketch for ESP8266 12e with the following specifications:
-the ESP module must read temperature and humidity via BME280 sensor module.
-the ESP module will read the sensor, send the readings to a server by accessing an URL like this one: [login to view URL] After sending the data, the module must enter deep sleep mode and wake up again after 5 minutes.
-the module needs to have a configuration portal where the user can set network SSID, network password, server IP for sending data and module name (eq: test1).
-when the module wakes up it will check if one pin is high(eq. I04). if phe pin is high it will trigger the configuration portal if not it will read the sensor, send data and go back to sleep.
I've attached a sketck that i use for an web relay. It is a good starting point, The configuration portal should look similar but you need to add functionality to configure server IP and module name.
11 freelancers are bidding on average €46 for this job
Hello! After reading your description, I interested to work with your project. I have hardware for testing project. And I have enough experience to make this project Look forward to your answer. Best regards.
I am having experience of working on IoT modules many different types of IoT based projects I recently made on connectivity between ESP and android app or like connectivity between ESP and webpages