The Pololu robot has a mechanical encoder attached to each wheel. Each encoder produces 45
electronic pulses for each revolution of the wheel. The program will use the wheel pulse counts to
calculate the position and heading (direction) of the robot.
The program is a C++ program that runs on the Pololu robot. The program gets the wheel pulse
counts on the robot and calculates the resulting robot position and heading. Each calculated
position is transmitted by the Wixel wireless module to the PC, to be displayed on the PC screen.
Program Calculations
Use the following formulas to calculate the change in robot position and then the new position,
based on the physical dimensions of the robot and the number of pulses from each wheel since the
previous position calculation.
Hi, I have m3pi pololu with mbed. i have worked before on m3pi SWARM robots with xbee communication. i can complete your project .
Relevant Skills and Experience
do you have 3pi or m3pi ?
Proposed Milestones
$33 USD - before to start project
$100 USD - after completion of project
Hi
How are you
As i am new here but working on online plate forms from the last 7 years
I worked alot related to your work
Thanks
Relevant Skills and Experience
work
Proposed Milestones
$30 USD - thanks