Find Jobs
Hire Freelancers

Electronic Board Design

$10-30 USD

Cancelled
Posted over 6 years ago

$10-30 USD

Paid on delivery
I need an analog and digital circuit designer who is proficient in schematics and PCB design (using Altium) of analog (including high voltage) and digital circuits (including Atmel AVR micro-controllers and CANBUS). You must be comfortable with going through various data sheets and designing the circuits according to data sheets. Also, you must be very detail-oriented. We will be working on long term project. To find the right candidate, I will be selecting more than one person and assigning a small project to evaluate your performance.
Project ID: 15549178

About the project

36 proposals
Remote project
Active 6 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
36 freelancers are bidding on average $29 USD for this job
User Avatar
Dear Sir, If you are looking for an highly skilled hardware engineer, I believe that I am the one who you're looking for. I am also an experienced PCB designer who has over 17 years design experience on complex PCB design. I can provide you with design service from schematic entry(circuit design) to PCB layout. I can help you prototype the PCB. Please message me if you are interested in my service. We can talk more. I would not disappoint you if you select my service. EDA Tools--ALTIUM DESIGNER17, orcad16.6, PADs9.5, Eagle Thanks!
$25 USD in 1 day
4.9 (117 reviews)
8.3
8.3
User Avatar
Hello. I'm an electrical engineer / PCBdesigner. Relevant Skills and Experience You may check my qualification in skills in the profile Proposed Milestones $25 USD - Small task for checking Please provide a small assigment to check my skills. Thank you
$25 USD in 14 days
4.9 (208 reviews)
7.5
7.5
User Avatar
Hello, We are a team include Schematic, Layout & Mechanical, matching more requirements & schedule. We have +15 years experience in Electronic design. You can look our profile for your ref. We are fluency in Altium & using AD17. Please contact us for more detail. Thanks! BK Tech
$25 USD in 3 days
5.0 (28 reviews)
6.7
6.7
User Avatar
We have over 15 exp to work on schematic, layout, gerber, 3D using Cadence Orcad, Allegro and Altium tools. Các Kỹ Năng và Kinh Nghiệm Liên Quan Please give us more detail about this job. If you need some of REF designs, please contact me. Các Mốc Thanh Toán Đề Xuất $25 USD - complete schematic, layout, gerber files Please trust and give us a chance to workwith you.
$25 USD in 1 day
5.0 (18 reviews)
5.5
5.5
User Avatar
Dear Sir, We are a small R & D company, based in Bulgaria, Europe. We work exclusively with U.S. partners. We specialize in developing Embed systems based ST(STM32),Microchip (Atmel – AVR,ARM) and TI (MSP430) MCPUs and peripheries. For our mobile projects use nRF51/52xxx and CC2540/41 BLEs. We realize projects with requirements similar to yours. If we receive more information about your project, we will give you a real cost and time to implement your project. Note: We based in Europe,Bulgaria - not customs problems and taxes for delivery models and samples for testing and build prototypes Best Valeri T
$40 USD in 1 day
4.7 (13 reviews)
5.7
5.7
User Avatar
Expert with more than 15 years of experience in embedded systems design and prototyping. Contact me for the best solution. Relevant Skills and Experience Embedded Systems Proposed Milestones $30 USD - Complete Solution
$30 USD in 3 days
4.4 (59 reviews)
6.2
6.2
User Avatar
I have expertise in Altium designing and can provide you your complete task in decided time frame with quality work. We can discuss further details in the message box Regards
$30 USD in 3 days
5.0 (64 reviews)
5.1
5.1
User Avatar
Hello there! Hope you doing good! If you still need this to be done, be sure to contact me. Lets make something awesome! Greetings! Habilidades y experiencia relevante Electronics Engineer Since May 2015 Htos propuestos $30 USD - Project Milestone
$30 USD in 30 days
4.8 (34 reviews)
5.4
5.4
User Avatar
Hi,sir I am very interesting in your job I can finish your projects with best quality. Relevant Skills and Experience My skills are following: PCB design, electronics design, analog electronics, digital electronics, power electronics, wireless communication etc. I want work with you. Thanks. Proposed Milestones $25 USD - primary
$25 USD in 1 day
4.5 (31 reviews)
4.9
4.9
User Avatar
I can do your job.
$100 USD in 7 days
4.8 (6 reviews)
4.6
4.6
User Avatar
I design on Altium software and I can fulfill your requirements.. Relevant Skills and Experience Already worked on designing of many projects using Micro-controller, GSM, GPS, Power supply and different sensors.. Proposed Milestones $25 USD - All necessary documents (Schematic, Gerber, NC Drill, etc.) If you can send few details of your project, it would be more helpful. Thank you Er. DK
$25 USD in 25 days
5.0 (2 reviews)
1.8
1.8
User Avatar
Valueable Sir. I am here for your service. I have lot of skills to design electronic PCBs. By working with you, I am glad & I will give suggestions about improvement in design. I need your Kindness. Thanks
$25 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
A proposal has not yet been provided
$25 USD in 4 days
0.0 (0 reviews)
0.0
0.0
User Avatar
HI.I over 6 years Experience in Altium also have good experience in Impedance controlled Design,Multi layer design,Mixed signal design also good experience in hardware design from Scratch. Relevant Skills and Experience PCB design,Schematic design,hardware design,PCB Reverse Engineering Proposed Milestones $25 USD - Schematic design,Review,Footprint assigning,Placement review,Routing Review,final review&Document Additional Services Offered $1 USD - PCB Reverse engineering
$25 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi. Nice to meet you. I can do it. If you award me with your project I can start it. Relevant Skills and Experience Circuit Design, Electrical Engineering, Electronics, Microcontroller, PCB Layout Proposed Milestones $25 USD - 1
$25 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
With more than 11 years experience in different electronics design and embedded systems I think I can finish this project quickly. Relevant Skills and Experience Electronics. Power electronics. Embedded systems. Components and datasheets analyzing Proposed Milestones $25 USD - After reviewing and analyzing schematics we can discuss milestones Could you provide me a project tasks. I will respond quickly.
$25 USD in 2 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Professional PCB designer and CAD/CAM Engineer with 3 years of experience. Area of expertise: - Coding on C/C++. - Creation of Schematic design and PCB layout in Altium Designer and Autodesk Eagle. - Creation of Library for Electronics components (with 3D Bodies Only in altium Designer). - Gerber Creation and PCB manufacturing. - Knowledge of Electronics component and sourcing. - Enclosure Design, 3D Modelling, 3D rendering and animation videos. - Expertise and much hands on experience of Soldering of small SMD components. - Prototyping and testing. Worked with MCU, Sensors (Digital & analog), GSM/GPRS, Wi-Fi, RTC, HDMI, Audio, Amplifier, Battery charger, Booster, Solar charger, Serial communication chips, IOT Products, etc. Familiar with Altium Designer, Autodesk Eagle, Solidworks, Autodesk Fusion 360, CAM350, e-Drawing, Proteus Professional.
$30 USD in 2 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi. I am Electronics Engineer having four years experience of PCB designing in Altium Designer. I have the capability to design, manufacture and fabricate your PCBs.(Manufacturing is upto 16 layers) Relevant Skills and Experience PCB Designing PCB manufacturing PCB Assembly Proposed Milestones $20 USD - Completion of task
$20 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
I am electronics engineer by profession. circuit designing is part of my responsibility.
$30 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello Sir/Madam, My name is Nikhil, I have more than 2 years of experience in PCB design using Altium Designer and proficient in making boards upto 4 layer. I can design pcb as per your requirement and can give suggestions for circuitry. If schematic and footprints are ready I can design layout in 2 days otherwise extra 2 more days each for making schematic and footprints. I have weekends off so I can devote weekend time fully to your work and give you faster results. Thank you. You can contact me/Whatsapp on 9766380501. Regards, Nikhil Deshingkar
$29 USD in 10 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED STATES
Somerville, United States
5.0
12
Payment method verified
Member since Jan 31, 2011

Client Verification

Other jobs from this client

business plan
$250-750 USD
Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.