Nasa Lunar Loo Challenge Team members needed

Greetings! I am an Aerospace Engineer with MS in Aerospace CFD (Computational Fluid Dynamics). I have an experience of 3 years working with Government and private organizations. I have studied Turbomachinery, Aero Vehicle Design and Computational Fluid Dynamics as my core in MS program and have successfully completed several projects related to CFD and turbomachinery. Few examples are "Design and analysis of centrifugal Compressor and high pressure turbine for a turbofan engine", "Analysis of first stage of turbine exposed to UHTs", "Design and analysis of fan Compressor" and several other projects. All these projects are done in ANSYS with ICEM CFD as the meshing tool while Fluent as the solver. I have also formulated generic MATLAB and FORTRAN codes for AVD of different aircrafts and conduction, convection, diffusion, advection and convection-diffusion problems which involve solving heat transfer problems by incorporating efficient numerical techniques. I have also been working on ANSYS Fluent and CFX for past three years and have good experience working with the simulations of turbomachinery. All the projects are in my portfolio. I can share with you the list of projects I have completed and you can have a look at my portfolio as well for further details. Feel free to contact me any time. Looking forward to working with you. Thank you!

Hi! I am electronic Engineer with more than 2 years of experience. I have read your descriptions precisely. I am interested in the project and can start working from today. I still have a few questions. Please leave a message on my chat so we can discuss the budget and deadline of the project. Your further response will be greatly welcome. Thanks

Hello! I am the right choice for this project. I have my own team of engineers and we are formerly named as “ACADEMICSASSISTANT”. We also did a very similar project before. For your project, we will do everything you need either it is circuit design & schematics, firmware development & programming, PCB design & development, whole 3D design, testing and development of device or product. In addition to this, we can also design & develop web interface, user interface and application for your device if you want. Even, we can develop and send a working prototype to your location for your product or device. We are very experienced in electronics, electrical, software and mechanical engineering research projects design & development. We can handle all programming related tasks as well. We have specialized and dedicated lab for testing of everything also. We will do all design, development of your project. Please contact me and I will share some videos of our past developed projects as sample. For any query, please feel free to contact me using chat option. Regards, AcademicsAssistant Engineering Team

I am a Mechanical Engineer I love Fluid Dynamics My 13 projects on Freelancer 1)Catia -Assembly & Simulation of robotic arm Ansys Apdl 2)Analysis of 5 structr includng an igs file 3)Analysis of Rectangular sheet with U-Notch & compared reslt w/h roark's formula Solidworks 4)Editng & Assembly of Pill Dispensr & its prts 5)Design, Assembly, 2d draft & Renderng of Breedng Box 4 Parrots 6)Design the mould die 4 an MS sheet metal ring. Sorcd the ring. 2d drafts & 3d model 7)Design & FEA analysis of the die & punch 4 a givn bathtub. Design calcs done 2 find the blank holdr force & Max drawing force which were used 2 find paramtrs of die & punch & sheet metal. Bathtub was modified accordingly. 8)3d Dsign with 2d drafts of a Scientific (soil testing apparatus) 9)Motion analysis of a Garage door. Researchd $ formulated equatns. Engg desgn calcs, 4 selectn of sprng & motr,& Force supplied by torsion spring, & torq reqrd by the motor 10)Design of 12 beads into 3d model frm 2d pdf 11)Prepd BOM & fabricatn drawing 12)Cad Conv -Won a contest Given png used to make dxf AutoCad format of req scale & ratio. Used 4 glass laser cutting Creo 13)Assembly of parts

Hi! I am a Mechanical Design Engineer with experience in FEA I can help you in FEA simulations for various problems including structural, thermal, contact and modal. You can check some of my sample work here: https://www.freelancer.com/u/lancing4you Kindly connect so that I can assist you better. Regards.

Hi there, I'm a mechanical engineer with industrial experience. I'm an expert in CAD, FEA, and Fluid Dynamics. With skills in Siemens NX, Ansys, SolidWorks, MATLAB, and MS Office. Waiting to work with you, please share details in chat. Best regards, Abhijeet

Hey , I have completed my MS in Electrical engineering. I have done my research work on Modelling and simulation of Satellite Antenna control servo system with BLDC drives. I have an enthusiasm for space projects. Lot more can be revealed in chat.

I am ready to be your preferred candidates to join the Nasa Lunar Loo challenge.I am an expert in fluid dynamics and electrical engineering .

Hi client, When I see NASA,I feel myself proud of joining the team.I am a senior electrical engineer having good understanding in physics and fluid mechanics as well.I am good in finite analysis and computation.I have enough knowledge in electronics field too. Thanks and best regards

Hello sir/ma'am, Hope you are doing well. I am an Electrical Engineering student with several internship experiences in circuit designing with ECAD, PCB designing with Eagle. Along with technical knowledge, I have relevant software skills in MATLAB and PLC. I have won several hackathon competitions and participated in national level robotics competition. In recent virtual internships experience I have developed my skills of documentation/reporting, multitasking, and time management. My certified knowledge in ISO 9001:2015 implementation and lean six sigma (White Belt) will help out us in continuous quality management and improvement. I want nothing but a single opportunity to implement my skills, experience and passion for work. I am ready to work with you without stipend, all I need is positive feedback and review from your end.

Hy Sir, I have done M.Sc. in Electrical Engineering, have four years of field experience in Electrical Maintenance and Industrial Automation can do all types of projects related to: 1. C, C++, Python Programming, Machine learning, Deep Learning, Artificial Intelligence, Neural Network 2. Digital Electronics, Microcontroller, Arduino programming, Digital Logic Design, Digital Design, Digital Signal Processing, Signal and System 3. Power System Related projects, all Electrical/Electronic engineering related assignments, and paper implementations 4. Low Voltage Electrical Power Distribution System Designing, Control Panel Designing, Motor Control Centre (MCC), Power Factor Correction System Designing using AutoCAD Electrical 5. Control System Engineering related Simulations, Linear Control System, Non-Linear Dynamical System, Digital Control System, Linear Programming (Optimization), PLC Programming, Industrial Automation, MATLAB, LABVIEW, Simulink Simulations sir I believe in customer satisfaction and long term business relation. plz hire me and I will not Let you down. I am an expert in control system and model both Linear and non Linear control system and their Controllers. I have gone a lot of projects related to control system, Machine Learning, AI , python C and C++ not through this platform but from other platform

After an experience in the field of instrumentation as an engineer specializing in the rotating machine,in an ammonia factory . so I would like to send you my application for the position of electrical engineer I'm at your disposal for any further information. Please accept, Madam, Sir, the expression of my respectful greetings.

I am an electrical engineer. I have no experience yet. I am very much passionate to study and work with astronomy. so if you want me in your project so inbox me i have a few question about what will be the task and deadlines etc. Hope for the best.

Through my 4 years of professional experience in the fields of electronics, industrial control and metrology I’ve acquired many skills on both sides of the fence dividing design from maintenance, that together with my unstoppable drive to tinker and improve have shaped my mind regarding design for maintenance and reliability. I always derive great satisfaction from seeing a new project reach completion, or making an old system perform better than it did before. I am a very fast and avid learner, most of my skills in electronics and software development come directly from my own tinkering, self learning and practical training.

I worked as a mechanical engineering in various projects related to such project. I worked on the CFD of a rocket in the with the AUB rocket team and various FEA projects with the AUB team at the SAE Supermileage competition in Michigan. Also I was able to developed 5 adaptive controllers for a helicopter. Looking forward to get involved in such a project!! Thanks

hello i am an aeronautical(airborne electronics) engineer ..I have gone through many courses related to electronics aerospace and done project in computer vision(image processing) ..I would love to be part of the program..(preferably in electrical engineering slot)

Hello . I am an electrical engineer and I am very interested in astronomy and stellar science. I will do my best to do what you and I want to do.

I am a space avionics engineer who has a vital contribution in India’s lunar lander mission. I can share my CV for more information. I am having an experience of 12 years in space industry.

I would like to join the team to help with the electrical design. I am not looking for any compensation. Thank you, Roger

I have completed my Masters in Aerospace Engineering from IIT kharagpur and have an FEA industry experience of 6 years in Automobile as well as Aerospace domain. I have performed all types of FEA analysis ranging from structural analysis to thermal analysis and from explicit to implicit analysis.I also have experience in all major FEA softwares like ansys, abaqus, hypermesh, LS dyna, CATIA, ANSA, etc. Feel free to contact me for your project requirement.