3 drawing 2D of drone in situation

Hi, Our product is an AWuAV 160 drone which has the particularity of having only one tilted motor and a ring wing and which must be used to carry loads. It is 1.60 meters in diameter and 0.60 meters high and has a four blade propeller. Its landing gear is 1.20 meters high and 1.20 meters wide and 1.0 meters Spacing And two bars which supports the load The skates are 1.50 meters long. (exemple-train) The load is 1 meter high, 1 meter wide, 1.20 meters long. (exemple-load) The first drawing must be inspired by the model joint (Darpa-Transformer-TX-2), the drawing does not need to be perfect what counts is the scenario. I join you with another drawing for the atmosphere. So by inspiring you with the attached model you have to redesign the scene by keeping the proportions indicated. The style is that of the 1st attached image (painting with water, gouache .. or aute thing drawing computer?) The colors idem. Work not very detailed or realistic as the attached image. 21x29.7 cm page size (more or less if it makes your work easier) The example is the first attached image In total I would need 3 drawings The design consists of 3 elements -the drone a simple ring surmounted by a camera (exemple-camera) The camera is 20 cm in diameter and 15 cm high and rests on a base of the same diameter with 3 arms (at 120 °) 3 cm in diameter which rests on the top of the drone -the landing gear equipped or not equipped with 4 wheels (exemple-landing gear) The landing gear is made of 5 cm diameter tube -the loading load strap load (picture) The 1st drawing of the drone with its train is ready to take a load without wheels 2nd drawing of the drone with its train and the moored load is ready to land without wheels The 3rd drawing, the drone alone in flight, joins the train + moored load with wheels Each drawing has a different background desert type and dust There will subsequently be another drawing of situation with the same elements marc