Mechanical / Structural Drafting for 2D / 3D modelling of a chemical Injection Skid, Pump and Tank

$10-11 USD

Completed

Posted

over 3 years ago

$10-11 USD

Paid on delivery

I need a mechanical / structural engineer for the following tasks: 1. Model the pump and skid attached in 3D (using an industrial 3D software). Pump type is a pneumatic double diaphragm pump for chemical dosing applications (pump skid dimensions to be assumed by the engineer, would be corrected during review). Member sizes to also be assumed. 2. Model the dosing tank to contain: i. A 2" RF 150# blinded drain nozzle (located at the bottom of the tank) ii. A 2" RF 150# inlet nozzle (located at the top of the tank) iii. A 12" RF 150# manhole (located at the top of the tank) iv. A 3/4" RF 150# outlet nozzle (located at the bottom of the tank) Tank plate should be 1/2" thick and dimensions should be 1.5m x 1.5m X 1.5m A primitive model could be used to represent the tubing for now. Note; This model will also be leveraged to develop 2D fabrication drawings for the skid structural framing and tank. Many thanks, Dr. Wisdom Enang

Solidworks

CAD/CAM

Mechanical Engineering

3D Modelling

Product Design

Project ID: 27832797

About the project

25 proposals

Remote project

Active 3 yrs ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

Get paid for your work

Outline your proposal

It's free to sign up and bid on jobs

Awarded to:

@fernandonnz

I can do the work that you are needing. I´ve so much piping experience in similar tasks, whit pumps and skids.

$11 USD in 7 days

5.0

(1 review)

0.1

25 freelancers are bidding on average $58 USD for this job

@afzalwaqas94

Hi! Greetings! I am a Mechanical Engineer with expertise in Mechanical Design. I have done projects that include Design of Telescopic Knuckle Boom, Design of Steel Space Frame Chassis for Formula SAE Vehicle, Design of Hydraulic brick machine, etc. Given my experience with design projects, I believe I am the right person for this job. I can show you my previous work if you want. For this project, I will use SolidWorks for 3D modelling and ANSYS Workbench for FEA. I will provide CAD and analysis files along with manufacturing layouts and drawings. Further, I will provide a rich technical report explaining all the results and steps involved in design. Kindly contact me to discuss further. Regards,

$11 USD in 3 days

4.8

(64 reviews)

6.3

@gophaneishwar7

Hi, My name is Ishwar, I am a Mechanical Engineer with many years of experience using FEA and CAD tools. I can do the structural drafting. Also i can do FEA. Please open a chat so that we can discuss it more. I will do my best to complete your project perfectly with high responsibility and passion. You will get wonderful results. Thanks in advance, Ishwar

$11 USD in 1 day

4.9

(54 reviews)

5.5

@Amare06

Hello sir, I am expert with product design please visit my profile i have done pump design. https://www.freelancer.com/projects/engineering/Professional-Heat-Pump-sizing-design/reviews https://www.freelancer.com/projects/mechanical-engineering/Design-Water-cooler-Heater-using/reviews

$350 USD in 10 days

4.9

(6 reviews)

4.9

@sajjadtaghvaeifr

Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, aerospace, biotechnology, computers, electronics, microelectromechanical systems, energy conversion, robotics and automation, and manufacturing. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.

$11 USD in 7 days

4.5

(23 reviews)

5.4

@aliozcancicek

Hi, My name is Ali Özcan ÇİÇEK. I am a mechanical engineer. I read your job carefully and found that it was suitable for my skills. I have been working mechanical design for 14 years. During this time I designed more than 80 machines, units or devices for garment, textile, agriculture, plastic recycling, HVAC, automobile sub-industry, durable consumer goods, packaging, transportation-transmission and industrial kitchen sectors. You can see some of them from my profile. 2 of them are patented (belong to me) and designed in the last 4 years. I also CFD expert. I have done many thermodynamics and flow analyzes in various software. You can see some of them from my profile. https://www.freelancer.com/u/aliozcancicek?w=f

$55 USD in 3 days

4.8

(5 reviews)

4.8

@shrikantpatil839

We have 6+ years of Industrial Experience Expert in SOLIDWORKS, Ansys and Product Development. # Proven ability in Product Designing, 3D Modeling, Motion Analysis, 2D Drawing. # Expertise on Sheet metal designing, Solid parts designing, Plastic parts designing. We work on 100% Customer Satisfaction Strategy. Feel free to contact me and Drop a message. I will get back to you as soon as possible. We are working on NDA projects and long term projects.

$11 USD in 7 days

4.4

(5 reviews)

4.0

@granimal

Hi, My name is Saurabh, I'm here to help you with your "2D / 3D modelling of a chemical Injection Skid, Pump and Tank" project. I am a 3D artist and I'm an expert in 3D Modeling, 3D Rendering, Rigging, Interior designing. You can check my portfolio https://www.freelancer.in/u/granimal?w=f I will provide you best quality work in very fair price. Lets discuss your project in detail and I'll show you more sample work in chat. I expect your call up soonest. Thanks & Regards Saurabh Tripathi

$30 USD in 2 days

3.6

(12 reviews)

4.4

@abelteshib

i can deliver it on time and i can redesign it based on the client comment with out additional payment

$20 USD in 2 days

0.0

(0 reviews)

0.0

@rijinjoydavid

Dear sir, I am interested to do this work. I have rich experience in CAD modelling by using CATIA, NX-UG, CREO, Software. I have 5.5 years of experience in 3D design and Drafting.

$10 USD in 2 days

0.0

(0 reviews)

0.0

@herbet160978

Hi My name is Herbet. I am mechanical engineer with 13 years experience in engineering and construction. For your project, I am capable to delivery on time and good quality. I am expert for using some of software such as AutoCAD, ANSYS, PVElit, compressed, Caesar and Solidwork. Please don't be hesitate to discuss with me. Regards, Herbet.

$20 USD in 1 day

0.0

(0 reviews)

0.0

@wilfredmaki1

Hello! I am Wilfred a 3D graphic designer specialized in product design. Details are most essential i product design and I am the best in that. In your 3D model i will add every detail as possible as the product could be , i use Arnold Render to calculate every detail needed to get realistic image. On this job I would be willing to participate with you in every step which will enable you to trace where and how far is your project before deadline. I am Good at meeting Deadlines. I have 10 years experience and I as work with the following software Cinema 4d and Z-brush , to do texturing i use Substance Painter and Photoshop. I also give you project in your desired format, name it . Thank you

$10 USD in 2 days

0.0

(0 reviews)

0.0

@muhammadtanveer7

Hi I'm mechanical engineer by profession and have wide knowledge in fluid mechanics and i deal with these pumps ,motors and apply my practical work through designing . i Know their configuration reciprocating ,single acting, double acting ,Nozzles, CD nozzles etc. Just waiting for your reply to further proceed

$10 USD in 5 days

0.0

(0 reviews)

0.0

@putufahlevi

I have designed many products for manufacturing. Please share all details I have done many Product design for CNC, Injection molding, 3D printing, vacuum forming etc. Also I have prepared 2D technical drawing for laser cutting, fabrication etc Hi, this is Putu I am Mechanical Design Engineer, with over 3 years experience. When do you need this finished by? To see my sample work, please send me a message. I look forward to working on this project with you.

$10 USD in 7 days

0.0

(0 reviews)

0.0

@vicentenascimen

Hello ! I am a Mechanical Designer with extensive experience in industrial projects, machinery and equipment, metal structures, and in the design and development of medical and dental products Performing Engineering Solutions for the most varied disciplines, Creative Solutions and Product Design, 3D Projects 2D Detailing. I am available to carry out the project you requested. Greetings ! Vicente

$270 USD in 7 days

0.0

(0 reviews)

0.0

@nehapatel007

Hello Dr. Wisdom, I am full time freelancer for mechanical design and development projects. Please check my portfolio for the modeling work that I have completed in Solidworks for your reference. I have a 3D printer of Creality Ender for manufacturing objects in PLA or ABS material. This service is to give idea of the designed components. Please contact me to discuss the details. Thank you, Neha

$10 USD in 5 days

0.0

(0 reviews)

0.0

@abduladil70

Hello, I have read your job description and understand that you really need a ( 3D model to printed) design . I can come up with the design that soothe your preference in no time. I have a proven record of delivering creative and innovative design solutions with proven ability of developing projects from inception through production to final delivery, ensuring that all work is effective, appropriate and delivered within agreed timescales. I can use the following tools well to do my job:3ds max software. I will deliver your job in the format (i.e in Hi Resolution ) and with all size specified to meet your deadline. I am very flexible with my clients and I do not hesitate to review my work if necessary. I am quite interested in working with you. I expect your call up soonest. Regards abdul

$11 USD in 7 days

0.0

(0 reviews)

0.0

@douglasbarreto1

I have worked in the design of this type of modular injection plants, both in the calculation and in the modeling in Solidworks

$200 USD in 7 days

0.0

(0 reviews)

0.0

@akashsinghvna

Mechanical Engineer with more than two years of hands on experience in structural, tanks and piping projects. Specialize in overseeing the construction-based projects, hence project management and its design being a key strength allows looking after engineering and commercial aspects of project.

$10 USD in 7 days