Booth Rendering -- 2

Hi! Our in house guy cancelled last minute. We need a booth rendering for an art exhibition booth by tomorrow evening, July 1st. The booth should be 9 feet by 20 feet, L shaped. Only 2 walls. The walls are 12 feet high. There are tiles covering both walls from the floor up to 10 feet high (please use the attached image file “[login to view URL]” to try to create a coherent pattern of tiles). The top 2 feet of the wall are covered in the white engraved plaster strip from the same file. On the floor, there is a Moroccan carpet (see image file “[login to view URL]”) - the carpet should be 7 feet by 14 feet. The images are placed on the wall, all centered at a height of 5.5 feet (so the center of each work is 5.5 feet high). The smaller wall only has one work (image file “[login to view URL]”), centered, while the larger wall has the remaining works, (uniformly distributed) in order from left to right: “[login to view URL]”, “[login to view URL]”, “[login to view URL]”. Please add frames around the images (black, matte, .75 inches thick and 1 inch deep) The lighting is not uniform across the booth, but rather, the photos are lit with a rectangular light beam that very specifically doesn’t reach anything outside of the frame, and the rest of the booth is only second-hand lit (thus a little darker). Finally, snapshots from the 3D rendering should show enough angles from outside and inside the booth to gain a clear understanding of its mise en scene. I hope to find someone that can help!!!!!!!!