Quick, already drawn, but give a few edits of a few parts, and dimension metric numbers. Into STL. for 3 D printing.
the "Q disk" needs to have a hole size which is 1/8 inch in diameter
The rod of the rectangle box thing is to be 0.01 inch thinner than 1/8 inch,
So that it snugly fits into the hole.
The Front of the box ROOM width needs to be 0.55 inch wide
The depth (length of the box ROOM) needs to be 1 inch long
The thickness of the box room needs to be 1/8 inch = 0.01 INCH
A FUTURE rectangle will slide in to fit into this box.
The tail rod thickness at the end must be thicker than 1/8 inch, so that the Q disk hole is narrower than the tail rod.
Please ALSO draw the tail rod (into pdf) inside the q disk, with the box above the q disk.
this is how the two piece should work. Like a flag pole, with the pole inside the q disk hole.
Dear client I have been in this industry for 14 years and such jobs are my daily practice.
This is my first time on this site and hence you can see that I do not have any ratings/testimonials to show you.
I can assure you that if you work with me once, you will always work with me for these kind of projects.
I will start the work immediately.
My sample work on Google drive -
[login to view URL]