Width height flv jobs

...or working on it • Solar Experience in Installation, Surveying or any related solar position • Must have a vehicle to make it to survey assignments • Exterior meter images and contextual photos of the site itself • Photos of the MSP/Breaker Panel • External and Sub-Panel images (as necessary) • Attic/Truss photos- including those exhibiting accurate measurements of top chord (rafter) spacing/height/width • Notes on the Map of the site with a key to locations of above mentioned Responsibilities • Use ladders as needed to enter into attics or access roofs • Use hand tools to perform cuts into drywall as needed to measure rafters in inaccessible attics • Capture photos of the electrical meter and service panels • Handle b...

As a consultant, my email signature is my calling card. It's currently too big and I need someone with experience to carefully duplicate and slim it down to 400px(width) x 150px(height). Here are the key aspects I need you to achieve: - The majority of outlook users will see the email signature correctly as per the new slimmed size. - The design should be identical to the existing one. Skill & experience: - Proficiency in graphic design and HTML - Extensive experience crafting email signatures specifically for Outlook - Exceptional attention to detail to ensure no aspects are lost in the resizing process. Please note, no new design or creativity is required. The task is essentially to replicate the existing design in a much slimmer format, while retaining its e...

...or working on it • Solar Experience in Installation, Surveying or any related solar position • Must have a vehicle to make it to survey assignments • Exterior meter images and contextual photos of the site itself • Photos of the MSP/Breaker Panel • External and Sub-Panel images (as necessary) • Attic/Truss photos- including those exhibiting accurate measurements of top chord (rafter) spacing/height/width • Notes on the Map of the site with a key to locations of above mentioned Responsibilities • Use ladders as needed to enter into attics or access roofs • Use hand tools to perform cuts into drywall as needed to measure rafters in inaccessible attics • Capture photos of the electrical meter and service panels • Handle b...

I'm looking for a skilled fashion designer to create a resort shirt for me. Here's what I need: - Fabric: The shirt should ...resort shirt for me. Here's what I need: - Fabric: The shirt should be made out of good quality material that reflects the attached photo - Color Palette: This project is a remake of a Celine piece from 2011 that I want, so the color scheme and pattern should align with the original. I want it to be identical, if possible. Size can be discussed as it is an oversized fit. My weight is 99 kg and my height is 178 cm. The ideal candidate should have experience in creating shirts. A background in fashion design is a plus, as well as knowledge in selecting and sourcing quality cotton fabrics. Please provide samples of previously designed resort sh...

...or working on it • Solar Experience in Installation, Surveying or any related solar position • Must have a vehicle to make it to survey assignments • Exterior meter images and contextual photos of the site itself • Photos of the MSP/Breaker Panel • External and Sub-Panel images (as necessary) • Attic/Truss photos- including those exhibiting accurate measurements of top chord (rafter) spacing/height/width • Notes on the Map of the site with a key to locations of above mentioned Responsibilities • Use ladders as needed to enter into attics or access roofs • Use hand tools to perform cuts into drywall as needed to measure rafters in inaccessible attics • Capture photos of the electrical meter and service panels • Handle b...

Please check this link: The job is to create HTML + CSS code for the following: 1. A table representing the “day view” of an agenda with a fixed top row; 2. Each row of the table represents half an hour; 3. Appointment DIVs that will attach to the “hour row” and be as height as the end time of the appointment demands, overlapping several table rows accordingly; 4. Appointment DIVs will be able to overlap each other when many appointments occur in the same hour row; 5. Same line of thought applies to Week view and Month view (please reffer to the document attached)

Hi Rabiul! Ive got 144 images. I need to have the background and hanger removed. I need the original size and cropped to 935px x 1400px @ 72dpi (save for web)... each clothing piece should match at the shoulder width.... with grey RGB 241 background color.. Thank you so much!

Specifications 3in height including the Bell X 2inch 3D piece (solid gold) White gold for the base Vs1 diamonds to go inside the logo In the shooting star rose gold 2in height including the Bell X 2inch 3D piece (solid gold) White gold for the base Vs1 diamonds to go inside the logo In the shooting star rose gold

Good morning, We need a logo () and a favicon () for our gnumail site. GNU like the GNU license but also like the African wildebeest animal. Transparent logo, width 140 and height 40 like the one in the attachment but replace the blue icon (on the left) with an icon related to Wildebeest and emails. Ex a Gnu or an envelope. Change white text AtosDbHost to gnumail or GnuMail or Gnumail. A favicon in the same theme as the logos. Width 65 and height 60 THANKS

Hi Ahmed, Similar to the others it needs to be all black with a white/transparent background, high-resolution & 6 inches in height. The green circle behind the cross I think would look best transparent. So just an outlining of the whole image. Please let me know if you have any questions or need more information. - Fida

I need someone one to do a 3d home rendering and drawing. I have provided pictures of the example of the home I want. Need someone now to bring it to life b...need someone one to do a 3d home rendering and drawing. I have provided pictures of the example of the home I want. Need someone now to bring it to life by doing all of the following docs: -3D model- exterior :To show the external wall decoration -3D model- interior : To show the interior wall decoration -Precise floor plan : To show the exact size of each room -Elevation drawing : To show the height of each floor & roof and To show the location of windows & doors -Windows schedule : To show the windows size and quantity -Door schedule : To show the doors size and quantity -Plumbing drawing : To show the electri...

I'm in need of a technical drawing for a wall, not for construction or renovation but for design purposes. The drawing should encomp... The drawing should encompass the following elements: - Electrical Layouts: The drawing should clearly indicate the placement of electrical sockets, switches, and fixtures on the wall. - Wall Finishes: This should specify the materials and textures that will be incorporated for the final design. I also require the dimensions of the wall to be included in the drawing. This encompasses the height, width, and thickness. The ideal freelancer for this job should have experience in technical drawing and a keen eye for design aesthetics. Knowledge of electrical layouts and wall materials is a plus. The final product should be both accurate a...

I am in need of a fashion model for fitting purposes. The primary use of the photos will be to help with designing and creating fashionable clothing items. Requirements: -- chest width required 99-102 cm , height 180 Please provide your portfolio and any relevant experience when applying.

I'm in need of a professional photoshop artist who can help me create a stunning, detailed and realistic mosaic design. This design will be used for decorative purposes and printed on large surfaces. Use the attached trading card photos to create a mosaic.. You do not need to use all photos. Examples of Mosaics below. https://m.media-amazon.com/images/I/81U+9QM-aqL._AC_UF894,1000_QL80_DpW..._AC_UF894, https://m.media-amazon.com/images/I/91jDvWW+j+L._AC_UF894,

...for managing product listings, shopping cart, checkout processes, and customer accounts. Advanced Product Search: Features allowing customers to search and filter products based on various criteria. Dynamic Installation Option: Customers can add installation services to their cart, with costs dynamically calculated based on the number of products and the width of each product. Avai ability determined by the customer’s zip code. Measuring Service Addition: Option to add a measuring service to the cart, availability also based on zip code. FedEx Tracking Integration: A dedicated page for customers to track their blinds shipments through FedEx. Payment Gateway Integration: Secure trans...

...objective of this post and chain detail is to serve as a safety barrier and hand railing in remote wilderness locations. - Material: Steel post and chain base plate to be 135-145mm diameter, 4 holes for chemset connection to rock, post to be 1000-1100mm tall, 50nb round 3mm minimum steel with a welded cap. - Level of Detail: 2D drawings including: 1. a singular post from a side view at 1000mm in height. 2. A singular plan view (showing base plate and holes 3. A side view of two posts connected by a chain 4. A side view of the base connection using a 160mm bolt into a hole fixed with a nut and washer. The drawings should be detailed, including not only the design layout but also the specific materials to be used in construction. Ideal Skills: - Experience with safety barri...

I'm in need of a structural design for my residential property. The structure should be designed to be one floor in height. I'd prefer a G+2 foundation type, that is, a structure with a Ground floor and 2 upper floors. Key Requirements: - Create a structural design for a single floor residential property - Implement a G+2 foundation (Ground floor + 2 upper floors) Ideal Skills and Experience: - Professional experience in structural design, particularly for residential projects - Proficiency with architectural design software to create detailed plans - Strong understanding of building codes and regulations, particularly for residential properties

We are looking for a talented designer who can update our current logo to underline the fact that the upcoming event will be our 20th Anniversary. - The main logo (ptc on a orange background) should not be edited - The logo should be minimalist and visually appealing - You are free to alter the width and height of the logo group - We do also welcome alternative ideas with a 20th anniversary badge (or something similar) that could be used separately to the main logo The final logo should fit into the design of the front page of our brochure (see attached image). The final logo should be an Adobe Illustrator file.

I urgently require an efficient freelancer with expertise in Joomla, web development, and working knowledge of Google Maps integration. Your responsibility will be to make some updates on my website. Tasks: - Replacing an existing picture with a new one. I'll provide the image. - Integrating Google Maps with full-width display. The correct address will be given. - The map should feature a Street View option for users. The project needs to begin immediately and completed swiftly. Payment is contingent upon completion of tasks. Please bid only if you're prepared to start right away. Thank you! Skills: - Joomla - Web development - Google Maps integration

... so does the loveseat and chair. The ch1.5, sofa 2, and extra long sofa would have 32" cushions. If the sofa has 22" cushions the bigger ones are 30". So once the sofa is entered it should extrapolate the other pieces. however, there are exceptions to the rule so I would want to be able to overwrite them. - Same thing with the sectionals, with knowing the sofa cushion size, the depth, and arm width, most pieces should auto fill the sizes. - The way I see it is the sheet is a grid with x # of spaces besides the picture, name and some corporate info. When creating one, I see a list of available templates and choose which ones I want to fill in the grid. Then I have a space to enter the basic sizes and it auto fills from there. The ideal product should be user ...

I need this to be done IMMEDIATELY! - Extract data in a specified format. - Transfer data from the price listing PDF to an Excel spreadsheet. - Input details such as SKU, Name, Description, Brand, Cost Price, Length, Width, Height, and Weight, which are highlighted in blue. - If any title or heading is not mentioned in the details provided in item #3, add it to columns U-Z. - Ensure all data is formatted correctly, with names in proper case and prices as numerical values. I'm in need of a proficient data entry freelancer to help convert a scanned image PDF to an Excel spreadsheet. Key Details: - The PDF contains less than 50 pages. - The data in the PDF is in the form of scanned images, making it crucial that the freelancer has experience in handling this ...

...wallpaper. So it is should be one module for category "mural wallpaper" and another module for "regular pattern wallpaper". (This option can be done with any alternative solutions) ______________________________________ PROCESS for "regular pattern wallpaper" 1) DIMENSIONS: Customer will enter the dimensions in either cm or inches (width x height) and will see the amount of rolls he needs to buy to cover this area (width x height). Assume, that roll length/width - 32ft x 2ft. 2) MATERIAL: Customer will select a material that has different prices per square foot for printing ("Standard Wallpaper" will be default, "Peal and stick" and will be alternative. These material types should be on admin panel so...

...configuration of my online store to ensure a seamless user experience. Your role will include: - Design: The store requires a complete redesign, incorporating changes to the color scheme, typography, and logo placement. The chosen candidate should be comfortable working with Figma for template designing. - Layout: I need a customized layout for my online store. Your prior experience with grid-based, full-width and masonry layouts will be valuable. - Plugins: A crucial part of the job involves configuring various plugins on the Shopify platform. Proficiency in this area is essential to avoid any glitches. Ideal candidates for this project should possess: - Extensive experience with Shopify template designing using Figma. - In-depth understanding and hands-on experience in custom...

I need a tool that can swiftly transform specific product configurations into PDF offers. Our product has 27 different configurations and will need 6 options to be considered for each offer. Expertise in HTML, JavaScript and PDF generation is necessary for this task. THE OPTIONS: 1. Length 2. Height 3. Width 4. Dimensions (part of 'Others') 5. Material (part of 'Others') 6. Pictures (part of 'Others') It's crucial that the freelancer fully understands these parameters, and can create a generator that will flawlessly add them to our PDF offers. Familiarity with product configuration or similar projects is definitely a plus. I appreciate your interest and look forward to seeing your bids.

...looking for a skilled graphic designer to create an effective and eye-catching roll-up banner for my company's booth at a conference. Your design should incorporate the following elements: - Company logo and name - Product/service information These details are to be rendered in our primary colors of red, black, white, and grey. Size Specifications: The banner should be 95 inches in height and 32.875 inches in width. Ideal Skills: - Proficiency in graphic design software such as Adobe Photoshop, or InDesign. - Ability to creatively combine text and graphics to communicate key information. - Experience in designing banners or similar promotional materials. Your understanding of color theory and ability to create a standout design that readily communicates our bu...

I'm in need of a structural design for my residential property. The structure should be designed to be one floor in height. I'd prefer a G+2 foundation type, that is, a structure with a Ground floor and 2 upper floors. Key Requirements: - Create a structural design for a single floor residential property - Implement a G+2 foundation (Ground floor + 2 upper floors) Ideal Skills and Experience: - Professional experience in structural design, particularly for residential projects - Proficiency with architectural design software to create detailed plans - Strong understanding of building codes and regulations, particularly for residential properties

...designer to create a custom cardboard box for a small product. I prefer cardboard as the material for the box. The box will be used for product packaging. It should not only provide a secure package for the product but also be visually appealing and well-suited for a retail environment. The product that the box is designed for has the following dimensions: less than 10 inches in length, width, and height. The ideal candidate for this project should have: - Proven experience in designing high-quality, custom cardboard boxes - Familiarity with creating packaging suitable for retail environments - An eye for creative and visually appealing design - The ability to work within the constraints of small box dimensions - Good communication skills to understand and meet the spec...

I'm looking for a skilled professional to assist me in processing two small lidar scans. - File Format and Software: I ha...two small lidar scans. - File Format and Software: I have the scans in LAZ format and I possess the necessary software to open and process them. Therefore, the ideal candidate should be proficient in working with LAZ files and have experience using the Cloudcompare software. - Measurement Requirement: Specifically, I need to measure the height difference between the two scans. Hence, familiarity with lidar data and the ability to accurately measure height differences in Cloudcompare is essential. I'm looking for someone who is detail-oriented and can deliver precise measurements from the lidar scans. If you have experience in this area,...

I'm seeking a talented 3D modeling expert to create an accurate design of a boat hull length 17.1563cm and beam 3.9688cm. The project's main purpose is to transition it into a 3D print in ideally fusion 360. Please ensure to focus specifically on the following characteristics: - Exact length, width, and height dimensions as above. - Plan Attached - Sample Photos Attached Ideally, you should have: - Extensive experience in 3D modeling, particularly in creating designs for 3D printing. - The ability to interpret and execute instructions with precision. - Proven reliability and attention to detail. Your application should include a detailed project proposal outlining how you plan to approach this project. Explain the steps you'll take, any challenges you antic...

...to create designs of soldier miniatures. - Detailing: The sculptures should have a medium level of detail, to ensure a balance between aesthetics and the time required for each piece. -They need printable in one piece. -The general design of all 4 soldiers is similar, but their weapons and pose variating. - Size: These miniature soldiers are intended to be quite small, specifically a 12mm height is preferred. - Style: The soldiers will be used for a sci-fi theme. A solid understanding of this genre or past experience creating sci-fi soldiers would be very helpful. And of board games and miniautre games in general. - Ideal candidates will have prior experience in 3D sculpture, especially within the miniature or tabletop gaming industry. Any additional experience or skills i...

I need a talented designer to create a minimalist poster for my restaurant opening. Poster Size Hight 100 cm and width 70 cm Logo and photos attached. Use this photos. and also a example added. Use logo colors. For print use CMYK color. Text To add- Prochainement OUVERTURE de votre restaurant Nous sommes Impatients De vos rencontrer! PSD and PDF file needed. Update- background example added. please use like this

I would like to know if you are the person for my project I need a STL file Used for laser engraving And for a stamping tool both told me that I need a TCL file I need this to be 3D I'm attaching a photo of the item that it's current which is made out of 925 Silver The thickness of the finding is 5,000 of an inch The height of this item is 21 mm The width of this item is 20 mm This one is currently stamped on a stamping machine with a progressive Stamping die I want to also be able to do this on a laser engraving machine which the seller told me it can do and he can send me a sample if we provide him with a STL file We also want to design new finding designs to be able to stamp or laser engrave which they all tell us we need a STL file to develop new style.

I have 4 pictures that I'd like to modify for better presentation. I need the height of the plot and parking space to be increased. Ideal Skills and Experience: - Graphic design with a strong 3D background - Proficiency in using design software for picture modification - Prior experience in similar projects, especially in increasing height in a visually appealing and realistic way - Good communication skills for potential back-and-forth during the project

Hi ART LAND DESIGN, I would like to hire you to create 9 table renders for me. 3 square tables, walnut veneer, maple butcher block, mushroom laminate, 3 round tables, maple veneer, walnut butcherblock, black laminate, and 3 rectangle tables, red oak veneer, cherry butcher block, and calcutta marble laminate. I would like them all standard height with the black base that I provided a picture for. No shadows, white background.

...engineer with experience in product enhancement to improve the design of a wearable exoskeleton robot product. Key aspects to be addressed include: - Improving the adjustment and attachment aspects of the product, specifically in relation to Straps and fasteners, Joint movement range, Comfort padding, IP65 rating, Battery pack integration, Electronics and wiring integration, Adjustment to waist width and depth. Ideal skills: - Strong mechanical engineering background - Experience in product development - Proficiency in working with wearable technology products is a big plus - Knowledge in ergonomics, performance enhancement, and aesthetics - Ability to understand and meet user needs through custom adjustments I'm looking for someone who can combine practicality with...

I'm seeking an architect with a Indian style modern design flair to create a G+3 home floor plan. Ideal candidates will have excellent experience drafting bespoke blueprints. Key specifications: - Architecture style...+ 2 floor - Room Requirements: 1-Ground floor car parking 2-first floor 1 kithcen ,wash area,pooja room,old parent bedroom with toilet ,living ,dining,stair,foyer area and powder toilet. 3-second floor 3 bedroom -one is master bedroom with balcony,dressing and toilet and 2 other are guest bedroom with on is extra space for library norms for designing front open 10'(3m) and building height upto 40'(12m) Strong skills in home design and experience in modern architecture are a must. Please provide relevant examples of your past work related to this proj...

...help bring my vision to life. This magnetic levitation motor is used on a pump body. The size of the motor is about 15cm × 15cm, which can achieve levitation and rotation. . Smooth operation of the rotor is crucial. We plan to mount a turbine rotor on the motor rotor so that it can rotate and pump liquid, just like a pump. We plan to add multiple sensors to the rotor to detect its position and height. Also, we want to be able to control the starting and stopping of the motor via an external button. These are the goals of our project....

I require someone skilled in Autodesk Revit to develop an architectural model. Your task will involve: - Create a plan view - Section view through the center of the structure - connection detail -side elevation -all relevant dimensions shown -include a title block Ideal skills and experiences: - Proficiency in Revit software - Experience in archit...experiences: - Proficiency in Revit software - Experience in architectural modeling Rest assured we'll work closely to fine-tune the details to my taste. Looking forward to collaborating with a creative and detail-oriented professional. this is a bridge that has been built out of 4mm diameter pasta rods. overall length of the structure is 840mm and the supports on each end are offset by 90mm in height. a detailed sketch wi...

Please take a look at the link below. - I wish for you to fully review the page. Please disregard the product name and...for this information to all be on one page including all links without the scroll bar. So I am looking for some to correct some of the CSS styling and other changes. Also I want this optimised for other devices for eg; mobiles, tabs etc. I will await for you input and suggestions. Please do not provide screenshots of the web page as I can already see this . I want the tabs to use the full width of the page. And the table below it to show the information. Please only respond if you know HTML & CSS. I am not looking to use WordPress and I am not looking to redesign my whole website based on one page and I do not use WHMCS.

Hi, I need you to help me setting up an elementor hero single image to full width and full height. I need this image to adapt automatically according to the device used to open the page. Contact me for more details . I will need you to work by remot using my pc, since i cannot share login details.

Hi, I need you to help me setting up an elementor hero single image to full width and full height. I need this image to adapt automatically according to the device used to open the page. Contact me for more details . I will need you to work by remot using my pc, since i cannot share login details.

I'm seeking an experienced analyst to apply ImageJ techniques on specific samples, which include DNA, chemical ...project will involve: - Measurement and quantification of the samples, including the calculation of bond lengths and symmetry. - Providing numerical values as output. - Describing the methodology used for analysis. - Must have science background 1)Bond lengths and symmetry of a graphene lattice 2)Width a carbon nanotube 3) Dimensions of a benzene ring symmetry and bond lengths 4) dimensions of a mica lattice symmetry 5) dimensions of a crystalline inorganic material Size of a single polymer 6)Width of a DNA molecule Substantial knowledge and experience with ImageJ, biological and chemical analysis, and the ability to articulate complex methodologies are es...

I need to import products and variants, but the problem is that variants are within the product name: Product Name - width, height. When I import it, it doesn't merge according to the name but each product remains separate. I don't have SKUs, and I'm using WP All Import. Example: Bambino - 70, 140 Bambino - 60, 120 I need to merge it into variants so that the product is only the name, for example, Bambino, which contains variants 70,140 and 60,120

4 ADVERT artworks to design with TOTAL BUDGET of 14usd for all 4 designs. Sizes of design Width x Height 330cm x 150cm 142cm x 132cm 142cm x 132cm 9.3cm x 6.5cm Budget is 14usd for all. PLEASE DONT APPLY IF YOU CANT ACCEPT THE BUDGET. Send your previous artworks of ADVERTS.

...detail length, width, and height measurements. Ideal Skills and Experience: - Proficient in engineering design - Familiarity with ADR 42 regulations - Experience in automotive sector - Steel structures designing expertise Key Requirements: - Design sleeper berth with steel frame and light-weight cladding internally and externally - Accurate length, width, and height dimensions - Conformance with ADR 42 regulations - Creation of a bolt-on application design - Ease of access for occupant - Allowance for wiring and lighting etc - AERODYNAMIC design to avoid wind drag or excess fuel consumption with the following dimensions being a must. Internal Dimensions External Dimensions Length- 650mm (Min) Length- 680mm (Max) Width...

Looking to design a real estate open house sign. The size of the sign is 24 inch wide by 18 inches height. I have attached my current real estate sign. I want to keep the colors the same and company logo in the same location(Top Right). I would like the sign to include "OPEN HOUSE", a White Arrow "-->", my Brokerage Name in small font (Lifestyle/Yonge Realty Inc. Brokerage), Name(Ashkan Shokouhi, Realtor salesperson in small font, Phone Number(416)303-3079).You can adjust the font size of the Name, Brokerage name to suit the size of the sign. I Have attached an example of open house signs for your reference

Trace radio base station plot (latitude, length), height tower, azimuth from an excel file to Google earth using Mapinfo

I am looking for an experienced interior designer specialized in false ceiling designs to transform my 4-bed flat. Here's what I need: - An innovative false ceiling design featuring geometric patterns: My preference is for symmetrical geometric pattern...room, and any additional areas. Ideal Skills and Experience: - Proven experience in designing and implementing false ceilings - Strong understanding and creativity in geometric patterns - Attention to detail and alignment with client's vision - Previous work on residential interiors is a plus. I expect the design to not only be visually captivating, but also functional with respect to room height and lighting setup. Your portfolio or previous work samples will be highly influential in the selection process. Looking f...

Hi, I have three more photos where the logo-band shall be inserted. It's an easier job than before. And after, we might get an ok to do it in "real" also and we can discuss also price of printing and installing. Kind regards, Patrick The logo-banner (like done before) shall be added to the company-signs at ab...after, we might get an ok to do it in "real" also and we can discuss also price of printing and installing. Kind regards, Patrick The logo-banner (like done before) shall be added to the company-signs at about the size marked yellow, running from side-to-side. Black banner with white logo (like at the windows before). On the reception desk use white background and logo in black. Please mind the height of the logo-banner. Shall be like marked. I al...

...for this project. You must mention "Dell" in the proposal in order to be noticed. Here is a brief for List of Features. 1. Invoice Currency Conversion using API and storing conversion rate in the database with date 2. Storing invoice value in base currency that is calculated based on conversion rate in the database so the total revenue is correct. 3. Invoice Custom Field Behavior changing, width of dropdown, custom field value and description 4. Invoice Total in Words in Customer Currency and Base Currency 5. Testing possibility to integrate Amazon S3 for file storage on Perfex CRM 6. Project Overview Screen, Task Details, Billing Calculations Customization. 7. Notifications Screen Customization for Mobile View 8. Notification integration with Mattermost with ...