This project involves the deliverables listed.
I have included a winzip folder with 4 PDf files numbered:
File1
File2
File3
File4
Each File is a step by Step guide as to what is required of the project.
## Deliverables
*The component displayed with dimensions in Pdf File4, needs to be modelled.
*Then a Chuck & stock also have to be modelled. The Chuck can be a short Cylinder of suitable diameter.
The Stock should be about about 5mm larger in diameter than the compoment and long enough to allow the component to be finished by parting off.
These will be evidenced from the I-DEAS manufacturing assembly.
*Then, using I-DEAS Generative Machining, create apropriate machining operations to fully produce the component.
No need to produce CL or NC files.
*FEEDS & Spindle speeds also need to be input. The feeds and speeds required are shown on Pdf File2 and File3.
*The Files to be submitted must be model files *.mf1 and *.mf2
## Platform
The program needs to run on the WINDOWS XP environment using the program I-DEAS NX V11.