solidwork

Topic 1 Milling machine tail-stock Jobs requiring milling operations in relation to their axes of rotation are usually supported between the centers of the dividing head and adjustable centre provided in the tail-stock. The parts of a milling machine tail-stock are shown in Figure 1. This is similar to the lathe tailstock. The screw 4 is introduced into the threaded hole of body 1. Centre 2 is inserted into the body such that, the hole provided in it enters onto the screw 4. Hand wheel 3 is mounted on the screw 4, by using the key 8 and fixed in position by using washer 6 and nut 7. By operating the hand wheel, the centre can be given the required movement/fine adjustment, while clamping the job between the centers. After adjustment, the centre can block by the screw 5, which is introduced into the body. Job required Assemble the parts of the milling machine tail-stock, shown in Figure 1 and draw, i) sectional view from the front ii) view from the right iii) Plan, and iv) Isometric View