Yocto thermocouple jobs

I'm seeking a professional with expert knowledge in precision analog design. Goal of the project is a small prototype board to measure K type thermocouple elements - with two different approaches. Additionaly obvisouly a MCU will take place - as well as RS485 communication. Absolut main aspect is an accurate (in sense of stability, low noise and absolute value representation) K thermocouple element measurement. Two approaches are forseen - using the high precision MAX31856 as well as the AD8495 in conjunction with a 20-bit SAR and 24-bit SigDelt ADC. Apart from the ADC proposition the project comprisis of a full circuit and PCB creation. Additionaly also the needed firmware for the respective communication (over SPI) shall be properly implemented (well structured and ...

... KEY TASKS: * Development of device drivers to establish a seamless communication between the Embedded Linux Operating System on IMX6 board and our USB devices - USB Camera and USB printer. * Thorough testing of the device drivers to ensure compatibility with Linux and smooth functioning of the hardware. Linux OS is already installed on board IDEAL SKILLS: * Required changes to Linux OS with Yocto project * Proficiency in the Linux operating system is crucial. * Demonstrated expertise in driver development specifically regarding USB devices such as cameras and printers. * Comprehensive understanding of USB Camera and USB printer is advantageous. * Strong knowledge of debugging is beneficial, to iron out any potential issues during driver development. If your expertise aligns...

I'm looking for a skilled Yocto Linux Developer to work on a project involving IoT devices specifically designed for telemetry. Key Responsibilities: - Customize the Linux kernel to fit our project's specific requirements - Build and configure Yocto images for smooth operation - Integrating and testing hardware components to ensure maximum functionality Ideal Candidate: The successful applicant should have significant experience in embedded Linux development, specifically with Yocto. Proficiency in kernel customization, building and configuring Yocto images, and hardware integration/testing is required. Familiarity with IoT devices, particularly in telemetry, would be a significant advantage. With your expertise, we will develop a reliable, tailo...

I am in need of a skilled embedded software engineer able to create a customized Yocto Linux Build specifically for my Variscite MX93 V2-A SOM module. The build must include these specific features: - WiFi support - Bluetooth support - Custom device drivers - CAN x2 support Build Instructions and Resources can be found at I also need the build to be based on a specific kernel version (Kernel V6.1.36). Ideal candidates should have experience in Linux operating systems, with specific knowledge of Yocto Linux being a major advantage. Experience in custom software builds and creating device specific drivers would certainly make you standout. Effective communication is critical for this project, as I look forward to regularly reviewing your progress

...inverter modules (half bridge) at different power and switching frequencies and monitor key parameters during testing. I would also like to measure temperature on the top of the device (with the top cover open) via an IR camera. - Required measurements/ key parameters: Input variables such as voltage, current, switching frequencies, and any other parameters Temperature via the IR camera and a thermocouple in the coolant line Coolant flow rate I currently lack clarity on the equipment and setup required for such testing. Recommendations or guidance on necessary items, such as testing kit, power supply, any other equipment will be greatly appreciated. I can provide the cooling loop and the IR camera if it needs to be setup at our facility. Ideal candidates will have detailed ...

I'm seeking skilled freelancers to bring up the iMax6 SOC Linux and develop a test application. This task will include: 1. Linux Deployment: You'll need to deploy Debian on the iMax6 SOC. Experience with SOC Linux configurations, especially with Debian, is crucial. Yocto also OK 2. Test Application Development: You'll develop an application allowing for: - I2C Communication - SPI Communication - GPIO Control - CAN Communication Prior knowledge in these specific types of communication and control is required. Note: The end-users for this project haven't been determined yet. However, a user-friendly and intuitive design could be beneficial for possible end consumers or system administrators besides developers.

Project Description: I am looking for a skilled developer to integrate a 10.1 inch capacitive lvds/rgb touchscreen on a Raspberry Pi ARM board running a custom Yocto built Linux. The ideal candidate should have experience with the following: - Capacitive touchscreen integration - Raspberry Pi development - Linux customization and development with Yocto The project will involve: - Configuring the Raspberry Pi to recognize and interact with the capacitive touchscreen - Customizing the Yocto built Linux to support the touchscreen functionality - Testing and debugging the integration to ensure smooth operation - Touchscreen calibration feature needed If you have the necessary skills and experience, please submit your proposal outlining your relevant experience and appr...

I am looking for a freelancer who can design and build an 8 channel J type thermocouple module. The module should be accurate Ideal Skills and Experience: - Experience in designing and building thermocouple modules. - Knowledge of J type thermocouples and their temperature ranges. - Ability to design a module with multiple channels. If you have the skills and experience required for this project, please submit your proposal.

...powering the device for up to 20 days. I'm looking for a freelancer who can help me create this device as soon as possible(in 2 -3 weeks may be). If you are experienced and have the skills to meet my specifications, please apply for this job. This should securely connect AWS IOT core MQTT broker. Need hardware, firmware and secure connect. IOT features needed: 1. Full detailed GPS tracking 2. Thermocouple connectivity with Internal and external temperature 3. Tilt 4. Humidly 6. Battery Level should last 20 days minimum. 7 Pressure 8. Size should be like cellphone size including battery. 9. Device should have certificate and securely bootstrap it. 10. During GPS location it needs to be accurate to the feet. Hardware should be cheap and be approximately $25. If more neede...

...skilled and experienced developer to help me with a Yocto project. I need to port the kernel from version 4.9-1.0.x-imx to version 4.17. . The two links below summarize what I want: The first contains the project link, to run it on your machine you will have to change the device to imx7d-pico and the machine command looks like this: MACHINE=imx7d-pico DISTRO=poky source setup-environment build and bitbake ipc-core-image-minimal And the second link is where the kernel that must be ported to the project above is located. The project will change from kernel 4.17 to 4.9-1.0.x-imx Note: The build has only worked on Ubuntu 18.04. You will probably need wsl2 or any machine with Ubuntu 18.04. first link: second

I am looking for a skilled developer with experience in Yocto to modify and compile at91bootstrap and u-boot bootloaders and kernel source. The specific modifications needed include: - Change RGB LED settings in order to modify the color boot sequence - Adding custom drivers - Implementing security patches The ideal candidate should have: - Strong knowledge and experience with Yocto - Proficiency in modifying and compiling bootloader and kernel source code - Familiarity with adding custom drivers and implementing security patches The project has a preferred timeline of completing within 1 week. However, if you have a flexible schedule and can meet the requirements within a different timeframe, please let us know.

I need a code from Github modified and fixed so it can be compiled and uploaded. This is the github project: Curre...multiple of ESP32 will be on the same network and I don't want name conflict. 3. I want all the updates source files so I can compile it further on my PC. Thank you ESP32 Board used: https://www.amazon.co.jp/gp/product/B08PB3SBQX/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1 Breakout Board Used: https://www.amazon.co.jp/gp/product/B092H9FM3R/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1 Thermocouple controller: https://www.amazon.co.jp/gp/product/B092ZCSM7J/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 Solid State Relay: https://www.amazon.co.jp/gp/product/B087JVVH51/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

Title: Yocto: Switch from sysVinit to systemd Overview: I am looking for a skilled freelancer who can assist me in switching the operating system from sysVinit to systemd in my yocto / poky project. I am not sure about the specific requirements for this switch and would appreciate some guidance. The project needs to be completed within 2 weeks. Requirements: - Expertise in yocto / poky development - In-depth knowledge of both sysVinit and systemd - Experience with system configuration and initialization processes - Strong understanding of Linux operating systems, specifically Ubuntu, CentOS, and Debian - Familiarity with yocto project structure and build processes Deliverables: - Detailed documentation outlining the steps required to switch from sysVinit to s...

1. Check remote access connection, to test environment for building and debugging to be sure that all process will go smoothly (1-2 hours) 2. Applying of RT patches to the kernel, build image for testing (3-5 hours) 3. Image test and debug (1-4 hours), it depends if there are some changes which should be implemented specific to the rockchip kernel 4. Custom layer recipe development (1-2 hours)

I am seeking a skilled developer to work on a Yocto Project that incorporates the RT-Preempt patch for Rock Pi E hardware by Radxa. You will be provided with SSH access to a system featuring: +Debian-based Linux +Cross-compiling tools already set up for Rock Pi +A functional Yocto2 environment configured for Rock Pi E +A working Yocto2 console image for Rock Pi E Requirements: +Experience with the Yocto Project and real-time preemptive kernels (RT-Preempt) +understanding of Rock Pi E hardware would be fine +Expertise in system optimization techniques for realtime os +Familiarity with Linux kernel development and customization +Your Responsibilities: Integrate the RT-Preempt kernel patch into the Yocto system Include all necessary components to compile and run the ...

Need RDK DAC build Downloadable Application Containers (DAC) is a RDK initiative to develop an experience Yocto image experience poky and dunfell experience Create a simple DAC app installation process for Raspberry Pi

...external (20K) ten turns potentiometer. The duty cycle: (0-100 %), needs to be adjustable via an internal or external (50K) ten turns potentiometer. Also needed is some code written for a feedback loop via a current sensor on the tank section of the induction heater for safety reasons. It's important that we also have code for a digital PID temperature controller that we have it has a type-K thermocouple input and it needs to be connected to the PWM outputs in some way for good temperature control. Lastly, the STM32H735G-DK evaluation kit needs to have several live data screens of GUI programming included in the programming to assist the user with getting to the functions and for monitoring the PWM squarewave signals and amplitude in real-time with several graphics pages...

Linux embedded SW developer, iMX6/Zynq we are looking for a skilled Linux embedded software developer to work on a project involving the iMX6 hardware platform (Variscite). The main functionality of the software will be to control 2 SPI peripherals (one Master and one Slave). the iMx6 is connected to an FPGA with the two SPI. both driver for Linux shall be developed and tested we have the dt...iMX6 hardware platform (Variscite). The main functionality of the software will be to control 2 SPI peripherals (one Master and one Slave). the iMx6 is connected to an FPGA with the two SPI. both driver for Linux shall be developed and tested we have the dts and rootfs, and we already started testing of he Master SPI (we will share code). SPI Slave has to be developed from scratch OS built with ...

Looking for an experienced embedded Linux developer to help with the issue. The devices uses raspberry pi 3B+ and a TFT LCD in RGB mode as display and I run Qt’s distribution (b2qt) on it. When I enabled the logo support in Linux, no LOGO is displayed during kernel boot through TFT LCD. Moreover, the rainbow test does not show even though splash is not disabled. (but it worked on HDMI).

I am looking for a skilled developer to create a Linux Yocto project for the NXP Imax8. The project requires the following features: - Install linux Debian OS - Install QT support library - and peripheral driver Link of Hardware Hardware requirements for the NXP Imax8 are specified. - Licensing for this project should be Open Source. Ideal skills and experience for this job include: - Proficiency in Linux Yocto project development - Experience with NXP Imax8 hardware - Strong knowledge of multimedia, networking, and security features in Linux - Familiarity with Open Source licensing.

...write code for reading temperature data from a thermocouple sensor. - The temperature sensor must be wired, not wireless. - We are using Ardunio IC for reading it - We just want the code showing how you are reading the temperature from the thermocouple Needs to start immidiately and deliver fast Skills and Experience: - Strong background in embedded systems and programming. - Proficient in working with thermocouple sensors. - Knowledge of coding languages such as C or C++. - Experience with hardware interfacing and microcontrollers. - Ability to accurately read and interpret temperature sensor data. - Attention to detail and ability to write clean, efficient code. Deliverables: - Complete code for reading temperature data from the thermocouple sensor. - Do...

Looking for an experienced embedded Linux developer to help with the issue. The devices uses raspberry pi 3B+ and a TFT LCD in RGB mode as display and I run Qt’s distribution (b2qt) on it. When I enabled the logo support in Linux, no LOGO is displayed during kernel boot through TFT LCD. Moreover, the rainbow test does not show even though splash is not disabled. (but it worked on HDMI).

Write an initialization script using Yocto that will allow target machine (SAMA5D27) to automatically boot and run custom application at power up, preferably using systemd.

I am looking for an experienced embedded Linux developer to help me with my project. The target hardware platform is the Raspberry Pi, and I need a custom bootloader with features for network booting, encryption support, as well as an IP discovery tool. The project must be completed within 3 months. I need a talented developer who can leverage the Yocto project to create the custom bootloader and get it up and running. The bootloader should be tailored to the specific needs of my project. Furthermore, I would like support for debugging capabilities should any issues arise during the development cycle. I'm looking for a reliable and experienced developer who can work within my specified timeframe and deliver an exceptional product. If you think you have the needed skills ...

I am looking for a Unity programer who can help me to add control API using websocket or REST and build Uinity. I have a unity project programmed for webGL but needs to convert for Ubuntu and Windows changing JShook to API

I have a small craft distillery and am interested in using thermocouples to monitor temperatures from up to 14 locations 8 to start with. The programmer can select the thermocouples and data collector/transmitter. Data Display A monitor will be displayed on the wall of the distillery which will read out the current temperatures of each thermocouple and pressure sensor in larger readable numbers against an image of the equipment. User App/WebSite Users can also login to a web page remotely to: • View current temperature and pressure readings. • Create load and save different profiles configured allowing for user defined notifications (screen, text, email for determined temperature readings) Example - Profiles for Vodka, Whiskey, Stripping, Brandy Finishing, Moons...

I am looking for a freelancer with experience in using Yocto on a SAMA5D27 board. The specific version of Yocto we will be using is Kirkstone. The ideal candidate should have a strong background in Yocto configuration and experience working with SAMA5D27 boards. Basically, I have a modified ".dts" file and I need to rebuild the kernel and update the necessary files (.dtb, .itb, its) in order to boot successfully on the SAMA5D27 evaluation board. In addition, what I am looking is for a candidate to develop a detailed procedure on how to accomplish this having a new .dts file at hand.

I am interested in finding a freelancer to help me with a Yocto project on a SAMA5D27 board. Although I have limited experience with Yocto, I do have a good understanding of embedded Linux. I need help customizing the kernel on the board by rebuilding it using a modified device tree source (dts) file. The main purpose of this project is to reconfigure and rebuild the kernel so it functions properly on the board with the updated dts file. Assistance may be needed with certain hardware peripherals, though I am familiar with the hardware and may need assistance later.

Arduino Portenta Machine Control Thermocouple breakout

I have dome data Need to write It's about circuit with op amp and determine eutectic point with thermocouple, along with some statistical metrics (such as confidence intervals and error bar on graph).

...powering the device for up to 20 days. I'm looking for a freelancer who can help me create this device as soon as possible(in 2 -3 weeks may be). If you are experienced and have the skills to meet my specifications, please apply for this job. This should securely connect AWS IOT core MQTT broker. Need hardware, firmware and secure connect. IOT features needed: 1. Full detailed GPS tracking 2. Thermocouple connectivity with Internal and external temperature 3. Tilt 4. Humidly 6. Battery Level should last 20 days minimum. 7 Pressure 8. Size should be like cellphone size including battery. 9. Device should have certificate and securely bootstrap it. Hardware should be cheap and be approximately $25. If more needed let me know why? The firmware programming shall be flexibl...

We have started with a working Yocto Dunfell release from NXP that provides a limited OS. We have a layer from other manufacturers that permits building a Ubuntu-like release in Yocto, but are having trouble getting this layer to work with the NXP Dunfell.

I have wireless VINT HUB controlling 1x (4x digital input Phidget), 1x (4x digital output Phidget), 1x (4x thermocouple Phidget), and 1x graphic LCD Phidget. i have a toggle on switch, which i want to turn on a 3 phase heater, this heater is monitored by thermocouple to be able to be set at different temp. When temp is reached i want heater to turn on and off. Also have another toggle on switch which will turn on a 3 phase fan. Also have another thermocouple that is to be placed in product just to monitor temp in product as a reference. I would like both temp readouts on the LCD screen. Would like to use Python coding please.

Hello, I have a custom yocto image for coral dev, but the pci is not working. The issue seems to be related to the device tree. I have old device tree that works fine with kernel 4.14 but the current device tree on kernel 6.1 is not working. For more details please contact me. Here is the issue i have: root@coral-dev:~# lspci root@coral-dev:~# dmesg |grep pci [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 rootfstype=ext4 rw rootwait net.ifnames=0 pci=pcie_bus_perf [ 1.768491] imx6q-pcie : error -ENOENT: pcie_bus clock source missing or invalid [ 1.770620] imx6q-pcie : error -ENOENT: pcie_bus clock source missing or invalid [ 1.770645] imx6q-pcie: probe of failed with error -2 [ 1.796623] imx6q-pcie: probe of failed

Having trouble with the thermocouple errors - and Thermostats KLipper - Through Mainsail keeps reporting a thermocouple error, which we belive is coming from the pin layout.

I need to build custom image with yocto for ARM

Hello, I need someone to help with creating a yocto recipe to build electron for raspberry pi running wayland

Hello, I need help building Yocto (kirkstone) image for coral dev board. Currently I'm able to build the Linux itself and run it on the device but I need help to setup the GPU/VPU libraries (libimxdmabuffer, libimxvpuapi), gsreamer-plugins-imx package (and specifically the jpeg decoder) , the WiFI/Bluetooth adapter and move the image to MMC. Please let me know in your comment the following otherwise your application won't be considered: Experience with Yocto: Yes/No Experience with gstramer: Yes/No Access to Coral Dev Board: Yes/No I'll provide access to environment to setup and build the image. To finalize the project I'll need a procedure how to replicate your work to a fresh repository. As of now I'm using the following layer repo: (wip/kirkst...

I need some one to build temperature control device with k type thermocouple and relay control.(need PID control). You can use any microcontroller like PIC or Atmega I need PCB design, Firmware in c. I am attaching some documents which will help you to know more about it. The attached document is the same product that i want to develop. with model no REX-C100FK06-M*AN output is relay type. temperature range - 0-1200k supply - 220v AC, 50HZ/60HZ.

Deliver report to client on Latex as well as pdf format of 7 page on topic of thermocouple.

Thermocouple as temperature sensor

...run a Webkiosk on a RaspberryPi. The Webkiosk should be a browser running in fullscreen displayed over HDMI. The browser accesses a webserver that runs locally on the Pi. The website is not in the scope of this task. The goal is to find a fitting technological software stack to display the website. These questions will have to be answered: - Which Operating System? RaspberryPi OS, Buildroot, Yocto etc. - What display method: Display Server yes/no, which one? Alternative? - What browser: Chromium, Firefox.. The software stack must meet following requirements: 1. Free & maintained 2. Good user experience 2.1 Low boot time (the less the better): 2.1.1: 10-20 sec.: Ok 2.1.2: 20-30 sec.: Tolerable 2.1.3: > 30 sec: Too much 2.2 Boot Logo / Animation 2.2....

I need someone to help me with building boot2qt image for Raspberry pi and migrate qt versions and allow of compilation of plugins.

...other industries in the future. For example, the measuring of acidity, or the measuring of the quantity of oil in an oil tank at an oil refinery, the speed at which an industrial motor is rotating or vibrations in the ground for measuring earthquakes. It’s a really robust product. For an example of a sensor we use, this is a thermocouple and it measures temperature (Image 3), the two wires plug into the PLC and the long sensor sits in a tank, the thermocouple is the IoT device that sends the data out to the PLC. Basically, our product takes measurements from the physical world, such as how much water is flowing through a pipe in real time (Image 4), and then it sends this information to the electronic world via the internet. Once the software on the indust...

Objectives: Create a circuity and electrical diagram with the code for an Arduino temperate monitoring system Components: LCD 2X16 IC Green, Red, and Yellow LED Alarm system Type K thermocouple with MAX6675 Amplifier Communication port between Arduino and S7 PLC Peltier Component to cool down an electrical contractor PID Control system for the Peltier cooler The system is to monitor the temperature of an electrical component (contactor) with a Type K thermocouple, this will send information to the Arduino which will use a PID controller system to increase or decrease the current going to the Peltier system such that the temperature remains at a constant 45Degrees C, the system will allow the user to see if the temperature of the electrical component is within the allowed...

We have been trained the model for NLP document suggestion and ranking, image classification and video. We're going to deploy these models on local environment as hardware like Raspberry PI 3 or 4 and Yocto. We need help to deploy these models as mentioned on Hardware OS. Please little study Yocto platform before. Thanks

Develop and customize a Yocto-based embedded Linux system for the Raspberry Pi 3 single-board computer. Develop Linux support for HC-SR04 sensor . Develop a module test application

I need some help with my Yocto Project Everything compiles perfect , but my Openssl version is 3.0.5 and i need to change it to version 1.1.1q The folder /poky/meta/recipes-connectivity/openss has 1.1.1q but it pulls 3.0.5 from somewhere . Should be a easy task for someone thats clued up with Yocto.

We have product and yocto bsp's, we need to build or develope this yocto project

We have product and yocto bsp, we need to compile and release the OS