Pico dico softver jobs
I'm seeking a proficient developer with experience in Raspberry Pi Pico, USB ethernet programming, NTP (Network Time Protocol) clients, and web server development. Integrate existing open source libraries to achieve the following objective. - Project is completely hosted on a Raspberry Pi Pico board using Arduino IDE, FreeRTOS, and libraries. - Creates an Ethernet endpoint when USB is connected to a Fedora Linux host PC. - NTP client enabled to obtain accurate Global time synchronization. - Web server with a single page offered which display a "Hello World" page with current date and time, and a drop down box where the host can set the time zone. This RPI Pico web page is accessed from FireFox on the Fedora Linux host.
... App Functionality: * Wi-Fi Network Listing: Upon launch, the app will display a list of available Wi-Fi networks on the user's device. * Pi Pico Detection: The app will filter the listed Wi-Fi networks to identify those specifically broadcast by Raspberry Pi Picos. * Connecting to Pico Wi-Fi: The user can select a detected Pico network, and the app will establish a connection to it. * Interaction with Pico (not needed): There are existing functionalities within the main app to interact with the Pico once connected. This functionality does not need to be built within this prototype. * Pico Reboot and Re-connection: After interacting with the Pico, it will reboot, causing its Wi-Fi network to disappear. The app should gracefully han...
Currently working on a project where I need ABMP file Printed using a raspberry pie PicoW and a thermal printer HS-K33 using the UART on thr pico. I have attached the bmp file.
I have a requirement for programming a Raspberry Pi Pico microcontroller to interact with multiple sensors in an escape room. The project responsibilities include: - Sensing and gathering data from temperature, pressure, and motion sensors in the escape room. - Control and actuation tasks for unlocking doors, manipulating lights, and triggering audio cues. - Provide feedback to players in the escape room. - Ensuring smooth communication and networking capabilities. Ideal candidates for the job should have experience in microcontroller programming, specifically the Raspberry Pi Pico, understanding of various sensor inputs, and experience with escape room devices would be an added advantage. It is required to have knowledge in coordinating sensed information to act upon vari...
Hi, I have one sample codes which work as voip client . it should run on ARM32 . and I have one rockchip rv1106 linux SBC (I can add memory and emmc size following your advise). this ...(arm-rockchip830-linux-uclibcgnueabihf ) ,but the voip sample codes need glib. so I am thinking maybe we should use buildroot to build a new linux image ,which support glib . the new linux image should handle audio input/output ,wifi driver (I will following your advise) more materials u may need: 1. if you want to know about rv1106 and setup SDK environment : 2. the voip sample codes and its hardware and software requirements: 2.
I need a skilled developer to combine my existing HTML-based user interface (UI) with my circuit-based MicroPython code. The aim for this implementation is to ensure smooth usability and circuit control functionality. Key Features to Inclu...code, the UI should control the circuit operation. Button Functionalities: - The buttons on the UI should have the ability to Start/Stop the circuit. - They should also facilitate changes to circuit settings. The ideal candidate for this project should have significant experience in MicroPython and HTML, with a strong understanding of UI design and circuit control. Experience with Raspberry Pi Pico projects would be beneficial. The freelancer should be capable to work independently, problem solve effectively, and deliver a high-quality integr...
need a poster with this information, add surgery pictures to match theme of this topic. be creative. PICO(TS) Question: In patients undergoing gastrointestinal surgeries, how does the implementation of standardized postoperative wound care protocols compared to usual care influence the occurrence of surgical site infections within 14 days post-surgery in a surgical ward setting? Methods: Level of Evidence: Meta-analysis of 28 studies. Sample Characteristics: 6026 subjects undergoing lower gastrointestinal surgery. Settings, Instruments, and Procedures: Various countries, wound protectors used in standardized postoperative wound care protocols compared to usual care. Strengths: Large sample size, meta-analysis design providing robust evidence. Weaknesses: Heterogeneity in study s...
I'm developing a project to monitor temperature with Raspberry Pico, utilizing MicroPython. The crux of the task involves integrating 3 thermistors and 3 LEDs. Circuit and coding has been completed already, looking assistance with Trouble shooting. Tasks will include: - Establishing a USB powered connection between Raspberry Pico and a simple circuit board. - Code development in MicroPython. - Accurate and responsive translation of data from the thermistors into thresholds that trigger the LEDs. Ideal Skills and Experience: - Proficiency in MicroPython. - Experience in developing simple circuit boards. - Skilled in integrating thermistors and LEDs. - Knowledge of Raspberry Pico is a must. A basic understanding of temperature systems and LED signaling principles...
I need a skilled programmer with experience in Raspberry Pi Pico WiFi and sensor data handling to create a example web server from arduino builder to pico-sdk cmake. KEY SPECIFICATIONS: end goal is convert this example and dependencies to picow-sdk cmake. REQUIRED SKILLSET: - Experience working with Raspberry Pi Pico Wifi and pico sdk
...unfortunately failed, he (Pico) always promises to send me the money but he lie again again, and the embassy visited the address above but could not find Mr Pico there, he said he is in overseas. Until now, the problem was not solved, its very big for me, its really burnden me , the embassy continues contact mr pico, and many times the mediation process is plan but Mr. Pico never responds it serious. and I am also report this case to my fried and my friend help me connect to a lawyer, and lawyer contact him and he reply again with promise, i ask the lawyer to bring this case to a court , due to money problem I think she not respond me, that is why i contacted your agent. i am continue with this person below: Francisco Javier Fernandez Sanchez, who is call...
...Integration with Raspberry Pi: • The central main node is seamlessly integrated with a Raspberry Pi 4, featuring a touchscreen interface. We have developed an intuitive GUI to simplify configuration and operation processes. • Field Node Configuration: Each field node, spaced at intervals exceeding 150 meters, is equipped with two digital outputs and two digital inputs. These nodes utilize Raspberry Pi Pico microcontrollers for efficient data processing and wireless communication. • Long-Range Wireless Communication via LoRa: The system employs LoRa modules for robust long-distance wireless communication between the main node and field nodes, ensuring uninterrupted connectivity even in remote areas. • Comprehensive User Interface: The main node's interface...
I am looking for an experienced Raspberry Pi Developer to take on a fascinating project involving both software development and hardware integration tasks. My team wants t...battery will be all housed in the insole and the pi will connect to a app via Bluetooth and will tell the user how much pounds of force they are generating with each step. I already have a supplier for the sensors and the raspberry pi I just need you and your team to code it and the web app. I already have a supplier for the sensors and I can provide the data sheet. I will want to use the raspberry pi pico w and powered by a coin battery. I look forward to collaborating with someone who can deliver an efficiently working system. This project is a great opportunity for people passionate about Raspberry Pi de...
I don't have the module right now; I need to purchase it, and it will arrive in three days. I already have the Raspberry Pico, but since I initially paid $30 for it, I'm offering the same price.
I need a simple Unity project which can run the attached script at Pico 3 and with Oculus (Quest and Rift). Additionally the controller button shall create a dialog box with the Button name (X or A or B or Z) and the trigger closes the dialog (OK button). If you add a free asset with any mini game, this would be excellent to test the controllers. I want an offer for fix price (!) and the project for local installation of Unity Version You send me the apk for Pico and Quest, the exe for Windows Oculus Rift, I send you the money and you send the project files for Unity in Windows. Then I create new apk/exe and this should work at Pico / Oculus. The whole task should be finisched up to 5th of February. If everything works fine we can go forward with additional projects (...
#### Abstract #### We need a Raspberry Pi Pico W to be able to send and receive JSON encoded data to AWS via MQTT over the NB-IoT cellular network. #### Progress #### We are well down the road on this with everything working using the built in WiFi on the Pico. We are using AWS Shadow to keep device config sync'd and then normal pub/sub to and from AWS topics with "AWS IoT rules" setup to store incoming MQTT data on each topic to Dynamo DB. This is all working perfectly utilising a script (see attached file ) and crucially, works in a "non blocking" way so other code can run whilst the script is listening for incoming MQTT messages to subscribed topics. Our next step is to replace using the onboard WiFi and instead to do the comms over the mobil...
...solid grasp of SEO best practices. Experience in creating portfolio websites would be a bonus. The goal is not just to make a website, but to make a website that serves as a compelling digital representation of my skills and services. I believe the right freelancer for this project is someone who appreciates this objective and has the necessary skills to achieve it. I prefer it to be developed by pico or grav CMS...
I need an expert to install the C/C++ SDK for Raspberry Pico on my Apple silicon device . Your aim will be to ensure that the SDK has the ability to compile and build in Visual Studio Code. Ideal candidates will have extensive experience with the C/C++ SDK, Raspberry Pico, and macOS. Familiarity with VSC on Apple Silicon chips is likewise necessary.
I am seeking a freelance specialist with proficiency in Sketchup and 3D printing to patch up two objects in Sketchup (Raspberry PI PICO case) in order to make them a solid. The missing faces are shown in red. This will allow me to make further edits and perform 3D printing.
...Pi Pico and will be connected to a 72V battery that will have the following features: 1. Read 20 strings of input voltages from the battery (a 72V li ion battery consists of 20 rows of cells connected in series (3.6V*20=72V)). - The range of voltage for each channel will be about 2V to 4.5V - There should be a JST connector for 21 wires on the PCB for this input, just like a battery BMS. - If the chip that reads this (probably a multiplexer) has more inputs than 20 then make it the maximum number of channels possible with that same component 2. Input for a hall sensor 3. Input for a thermistor 4. Input for a moisture sensor * All inputs should be with a connector that I will choose later on in the project The PCB will have the following components mounted on it: Raspberry P...
I am looking for a freelancer to help guide me through the installation and usage of these software tools on Linux: OpenOCD, Python3, PySerial, Raspberry Pi Pico SDK, and arm-none-eabi-gcc. As a user with an advanced acquaintance with the stated tools, I still need an expert touch to ensure a seamless and effective setup process via TeamViewer. Ideal Skills and Experience: - Proficiency in guiding OpenOCD, Python3, PySerial, Raspberry Pi Pico SDK, and arm-none-eabi-gcc installations on Linux - Familiarity with Raspberry Pi Pico RP2040 and the related installation intricacies - Proficient in providing remote assistance via TeamViewer. Your role will entail providing clear and concise step-by-step
...in the comparitor (e.g. ZERO can be set with the feedback potentiometer at 25% (2vdc) instead of 0% (1vdc). 4. A 25-turn trimmer will allow setting the dead-band between forward and reverse drive triggers from 1% to 10% to compensate for noisy analog input signals. 5. The analog input section is protected against AC signals and overvoltage to prevent damage from incorrect field connections. A Pico-fuse is acceptable in this case. 6. The circuit is powered by 24vdc. 7. Deliverables: a) Altium 365-based schematic utilizing US-sourced components. b) Altium generated bill of materials. c) PCB layout not required Ideal skills and qualifications: - Experience with control systems engineering - Proficiency in designing with discrete components - Understanding of f...
Setting up Raspberry Pi Pico C/C++ Development Environment on Windows Skills: Raspberry Pi, C/C++ programming, Windows I am looking for a freelancer who can assist me in setting up a Raspberry Pi Pico C/C++ development environment on my Windows PC. > I should able to build c/c++ > I should able to debug code > need to demonstrate me. Operating System: Windows Specific Libraries or Tools: Not Sure My familiarity with Raspberry Pi Pico programming is at an intermediate level. Requirements: - Experience in setting up Raspberry Pi Pico development environment on Windows - Proficiency in C/C++ programming - Knowledge of Windows operating system - Familiarity with Raspberry Pi Pico programming If you have the necessary skills and experience, pl...
Setting up Raspberry Pi Pico C/C++ Development Environment on Windows Skills: Raspberry Pi, C/C++ programming, Windows I am looking for a freelancer who can assist me in setting up a Raspberry Pi Pico C/C++ development environment on my Windows PC. > I should able to build c/c++ > I should able to debug code > need to demonstrate me. Operating System: Windows Specific Libraries or Tools: Not Sure My familiarity with Raspberry Pi Pico programming is at an intermediate level. Requirements: - Experience in setting up Raspberry Pi Pico development environment on Windows - Proficiency in C/C++ programming - Knowledge of Windows operating system - Familiarity with Raspberry Pi Pico programming If you have the necessary skills and experience, pl...
The primary objective of this project is to enhance the engagement of our YouTube thum...future work if we are contacted outside of Freelancer ** The youtube link is for reference to the current thumbnail and content. Requirements: Thumbnail Design: Revise the current YouTube thumbnail to make it more engaging. Maintain the placement of information on the left side, and modify the area indicated by arrows in the provided materials. ++ Reference Material in this case our Lutron Pico Shade Keypad Video ++ Thumbnails should prominently feature the highlighted product, service, or installation in the video +++ We can provide an image or details you may need - just ask. ++++ Maintain a consistent left-side information placement as specified. Thank you, Tyler
I am looking for a skilled and experienced developer to help me with a Yocto project. I need to port the kernel from version 4.9-1.0.x-imx to version 4.17. . The two links below summarize what I want: The first contains the project link, to run it on your machine you will have to change the device to imx7d-pico and the machine command looks like this: MACHINE=imx7d-pico DISTRO=poky source setup-environment build and bitbake ipc-core-image-minimal And the second link is where the kernel that must be ported to the project above is located. The project will change from kernel 4.17 to 4.9-1.0.x-imx Note: The build has only worked on Ubuntu 18.04. You will probably need wsl2 or any machine with Ubuntu 18.04. first link:
1. Add a CL filter with 1 uF capasitor 50V and 16 uH inductor at 0,25A. 2. Change all the pin headers. LED, BT1,BT2 - BT6, Joystick and Can header to JST PA 2.0 connectors. 3. Change the F1 fuse to a PTC Resettable Fuses 100mA 50-60V. 4. Check that all placment off components is correct. 5. Check that it can be maked by example JLCPCB, or other PCB services with PCB assembly.
I am looking for help with my embedded Rust project. There is existing code to be debugged, though it's sort of incomplete. I need help with reading a DMX (https://en.wikipedia.o...incomplete. I need help with reading a DMX () Signal with a rpi 2040`s pio state machine. Here is the Github PR that tries to implement it: The owner of that repo stopped replying, but i need the library to have that feature for my other projects to work. Here is the same thing, working on the rpi pico but in c++: (I imagine, that the state machines should be the same) I am hoping to find someone who specializes in Rust, embedded systems, and debugging in order to help me to get this PR to work.
I am looking for help with my embedded Rust project. There is existing code to be debugged, though it's sort of incomplete. I need help with reading a DMX (https://en.wikipedia....incomplete. I need help with reading a DMX () Signal with a rpi 2040`s pio state machine. Here is the Github PR that tries to implement it: The owner of that repo stopped responding, but i need the library to have that feature for my other projects to work. Here is the same thing, working on the rpi pico but in c++: (I imagine, that the state machines should be the same) I am hoping to find someone who specializes in Rust, embedded systems, and debugging in order to help me to get this PR to work.
I'm looking to hire a talented Unity developer to create a small app that will display the unique PICO device ID - as simple as that. The app must work on both versions of PICO - Pico 4K 2G Pico 3G
...to create a QR code display for me. The project involves creating a digital display with a arduino or similar The main purpose of the QR codes is to provide user credentials to connect to an app. I will need 1 QR code to be displayed on a 2 - 2.5" square screen in monochrome, color is not needed Skills and experience required for this project include: - Proficiency in arduino or Raspberrypi Pico microPython - find a board and screen that is all in 1 or simply plugged together and doesn't need soldering cables together, it should be slim - receive png from node webservice via usb or wifi I have already done this a couple of years ago with a esp8866 board and ardafruit ST7735 display and a node webservice. The source code is attached. software-specs: listens to usb ...
Hello, I'm looking to get some help to implement this custom theme: Device Stack: - Sensors: Motion (from Lutron), Temperature - Lights: Lutron Pico, RA2 Dimming Switches - AC: Daikin AC - Bond Bridge (to communicate with Somfy-enabled Curtains & Blinds) - Media: Apple TV, Samsung TV, Netflix & Spotify - Sound: Samsung Soundbar - Security: UniFi Protect - G4 Doorbell Features: - Floor Plan Integration (ability to control all devices from the floor plan) - Rooms: Display switches to all devices and sensors What's Not Required: - People At Home - Philips HUE Support - not using colour changing lights - Plex (under Media) - not using - Clean Up tab - not using an integrated robovac Other Requirements: - Privacy & security is of paramount importance
...Experience: - Proficiency in Python and Arduino - Experience working with RESTful APIs - Knowledge of Neo Pixel and LED strip integration - Familiarity with graphical data display on LED strips The ideal candidate should have access to the necessary API documentation and credentials. The data to be displayed on the LED strip is graphical in nature. Write a python or arduino script for a ESP32 or Pico to total payments from a sqaure payments api and store just the total into flash storage. The script should check that the total is equal or greater than the previous total before it writes the new total in. Refunds should subtract from the total but not from the output. The total will then be displayed by a simple neo pixel ring and led strip. This will be imatating a thermomet...
I am looking for a freelancer who is familiar with the Modbus RTU protocol and has experience with its implementation. The project involves working with the RP2040 Raspberry Pi Pico to create a communication device. Skills and experience required: - Strong knowledge of Modbus RTU protocol - Proficiency in C/C++ programming language - Experience working with the RP2040 Raspberry Pi Pico - Familiarity with hardware and software implementations The freelancer should be able to assist with both the hardware and software aspects of the project. This includes configuring the RP2040 Raspberry Pi Pico for communication purposes and developing the necessary software to establish Modbus RTU communication. If you have the required skills and experience, please submit your prop...
I am looking for a freelancer to help me with my Raspberry PI PICO W project. The specific functionality I would like the Raspberry Pi PICO W to achieve running my existing C/C++ code. The preferred programming language for this project is C/C++. Additionally, I have specific hardware in mind for this project, so I would need my freelancer to work with this hardware. So if you're an experienced freelancer with a background in working with the Raspberry PI PICO W, I'd love to hear from you!
...thinking of using the following: - Raspberry Pi Pico H - High Precision RTC Module for Raspberry Pi Pico, Onboard DS3231 Chip @XYGStudy (Pico-RTC-DS3231) - SIM7080G NB-IoT / Cat-M(eMTC) / GNSS Module for Raspberry Pi Pico - DiP-Pi Power Master for Raspberry Pi Pico - 5MP OV5642 Mini SPI Camera Module for Raspberry Pi Pico - DHT22(AM2302) After contacting Waveshare they replied that the IO resources for the Pico are too less to handle all the required functions. Would you be willing to help with choosing appropriate hardware (available in EU) to continue on with developing the project firmware? I am ok with going a different route and using ESP32. There is an equivalent project developed in pi zero at the moment and I'm willing to...
I am looking for an expert to assist in the development ...with the following key features: Image capture Basic image manipulation capabilities (skew correction) Web requests with the manipulated image Implementation of a user-friendly captive portal for network credential input I have looked at using a Raspberry Pi Pico W with Micropython and an Arducam module to build this project, but I am open to alternative recommendations based on your expertise. If have experience in hardware prototyping and programming, particularly with experience in the Raspberry Pi Pico W, Micropython, and Arducam module (or comparable alternatives), I'd love to hear from you. Please provide relevant details about your background, skills, and any previous projects that highl...
I am looking for a developer who can help me migrate an existing STM32 Cube C++ codebase to Raspberry Pi Pico C code. Skills and Experience required: - Strong proficiency in C programming language - Experience with STM32 Cube C++ codebase - Familiarity with Raspberry Pi Pico and C programming for microcontrollers The ideal candidate should have prior experience in migrating code between different platforms and be able to ensure a smooth transition from STM32 Cube C++ code to Raspberry Pi Pico C code. The output language for the migrated code should be in C. If you are confident in your skills and have the necessary experience, please reach out to discuss the project further.
I need an IoT dev for my 2 sensor project,I have succesfully interfaced with both(1 mic and 1 sd card reader) All I need you to do is record audio data in a playable file format (like .wav) and save to sd card.
I'm looking to use a Raspberry Pi Pico to implement a specific feature: sensor integration. To do this, I need a programmer familiar with Python or C/C++ coding language to help me create the IoT device. I'm looking for someone who can provide expertise in the Raspberry Pi Pico system and code the project in the most effective manner possible. The completed project should be something that is efficient and reliable.
I am looking for someone to help improve the HT1621 LCD display and Raspberry Pi Pico SPI circuit. The specific improvement I am looking for is a more reliable and durable connection for industrial applications. Currently I am using it and got failure in 3 nos as display and controller both get damge. Currently used schematic is attached Skills and Experience: - Experience with HT1621 LCD display and Raspberry Pi Pico SPI circuit - Knowledge of circuit improvement techniques - Strong understanding of SPI communication - Ability to troubleshoot and diagnose connection issues - Familiarity with Raspberry Pi programming and configuration
I am looking for a skilled freelancer to develop software for controlling WS2812B LED staircase lights on a Raspberry Pi Pico with main requirements for the program are as follows: 1. The controller should have two lighting modes: standby mode, which is a gentle illumination, and the main mode, which sequentially lights up the steps when the motion sensor is activated. The sequence of lighting the steps should be from top to bottom or vice versa, depending on which motion sensor is triggered. 2. The program should offer several lighting effects to choose from. 3. Additionally, it should be possible for the installer to set the desired number of steps and the width of the digital LED strip. 4. The program should allow the user to easily edit parameters such as light color, effects
I am looking for an experienced developer to create a Micropython program on a raspberry pi pico and associated PCB for reading a generic resistive shunt. The project will require the following skills and experience: - Proficiency in Micropython programming language - Experience in designing and developing PCBs for sensor applications - Knowledge of resistive shunt technology and measurement techniques The project will involve designing and building a PCB that can read shunt measurements in the range of 50A to 500A with a standard level of accuracy of ±1%. The shunt to be used will be resistive in nature. The developer should be able to recommend the appropriate components and technologies to achieve the desired level of accuracy and range. The program should be written in ...
I need an electronics expert who can tell me what signals I need to send down the RJ45 cables and control the unit instead of the EC50 Control panel. I need to control the unit with a pico or simalar.
Hi, we have an urgent request for the below: 1) License for assignment of lease: I attach a draft to review (I cannot attach here but I can send). Also please add that Pico London Ltd remains guarantor for the rent in case the assignee doesnt pay. 2) Agreement for assignment: a new document, between Pico London and Ms Tan (the lease assignee). Only to state: - Ms Tan is obliged to take on the lease at the latest on 23rd June 2024; - Ms Tan can decide to ask Pico to assign it earlier than that; - Pico London will not assign the lease to anyone else in the meantime; Thank you very much Edo
I need code to read water pressure from this sensor and display it on website. Code a simple Webserver into the Pi to read this sensor and display every 10 sec. Code should also have watchdog to reboot if issue and alert.
