Wifi router firmware jobs
Looking for a small backend development team that also have worked with telecom routers in the telecom space or manufacturing space. Do not bid with copy and paste comment Must show proof of the sector and past works
...and higher overall profitability. Accomplished with our pre-configured, portable, extensively validated, cell/satellite interfaced, mobile HOO-nahTM devices, and/or tailored connectivity consulting, design, and installation solutions, specifically adapted to your needs. Our multi-patented solutions (Europe, United States, Australia) are not an internet or cell provider but can provide cellular, WIFI, GPS, and video-teleconferencing. Our solutions have been successfully tested and deployed in multiple states. Over the past 7 years, our solutions have also been adapted to moving vehicles and ambulances, RVs, cabins, campsites, and remote homes, including in rural Utah. I have prepared a PDF with key websites, key materials from our websites, and some pictures of slides about our ...
I am looking for a freelancer who can develop an attendance system via wifi with mobile app access REPORT. Ideal skills and experience: - KNOWS HOW TO WRITE A REPORT - Experience in developing attendance systems with mobile app access - Familiarity with wifi technology - Experience in integrating systems with payroll - Strong communication skills to understand our specific needs and provide updates throughout the development process.
My VPN is not working. Trying to trouble shoot with both the NordVPN app as well as my GL; iNET travel router which I will be using to repeat. I have a MacBook pro. All VPNS working fine but there must be a Leak as my IP address leaks through everytime. Consulted with Nord many times they can't even figure it out.
Looking for a software programmer to connect a custom virtual instrument using OSC or MIDI to with traditional DAWS (Logic Pro X). We are going to develop the wearable mus...X). We are going to develop the wearable music glove as the controller (tapping on fingers and hand gestures) and need your assistance to create the connection between the controller and the DAW. About the glove: a fully functional glove capable of connecting to the communication bridge and delivering gyroscope data to it. The communication bridge (probably based on a Raspberry Pi computer and a router). The prototype Glove will have to be adjusted to work with the MIDI controller (DAW). Kindly respond with a proposal that shows what is possible with your programming and the type of features that you are able to...
It needs network, control of DSP chips via I2C, presets, and UART and bootloader and firmware update process. We have the code for Freescale chip in C, and it works perfectly but code needs to be moved to STM. Please apply if you are experienced and confident.
...studio 2022 and delivered to me in source code The basic that the system should be able to do is as listed below. (1) Visitor/ Guest registration – capture the details of the visitor including Full names, Phone number, Id /Passport number, Nationality, Gender, ……………………………….. (2) Room creation – create various rooms available, including size, features i.e. single bed, double bed, hot shower, dstv, wifi, bed only, bed and breakfast and more. Capture unique room number, name and floor it’s located. Capture the rate for the room per night or per other letting terms. Capture extra modifiers that can make the room more expensive. (3) Laundry services – capture various categories...
I am looking for a dev that may be able to help me add some features to a react/electron project. We are starting with an electron-react-boilerplate but we are looking to add a feature where a user can select and connect to a wifi network and display an onscreen keyboard to enter a password for the wifi network or add a hidden network if needed. We are using the wifi-control npm module and need help getting it all tied together. Is this type of work something you have experience with.
...engineer developer to build a firmware for a board that uses ESP32 and UWB technology. The primary function of the firmware is indoor tracking, and I am open to suggestions for the specific UWB module to use but must have an ESP32 module. The firmware bot both anchor and TAG, should report the distance from a Tag to an Anchor and the (X, Y) position in meters. The ideal candidate for this job should have experience in firmware development using ESP32 and knowledge of UWB technology for indoor tracking with measures over 100mts. I'm also open to buying the board from your own making and design. The project Success will be finished with the delivery of the firmware and the purchase of the suggested boards. Once the boards arrived at my home I�...
I am seeking a Mikrotik CHR cloud router expert to set up two-way communication - VPN Gateway specifically for site-to-site connectivity. The router has got already configured VPN to site 2 (IKEv2 - which should provide additional security for the system). Whole environment is ready on Hetzner cloud therefore there is no wiring and everything is via routing only. I need an experienced specialist who is familiar with cloud routing and is able to achieve communication between server #1 and server #2 - more detailed in attached schema. Additionally, I will need assistance in setting up all the necessary configurations to ensure a successful implementation.
I am looking for a modern style logo for my website. The ideal colors for the logo are blue, green, white, and charcoal grey, but it...am open to creative suggestions. The logo will be used primarily for my website as well as social media. I am seeking a designer with experience in modern logo design. We are tech company in the telecommunications sector. We are a Internet Service Provider to residential users and business users. I want the logo to be very techy and clean and modern. I have attached our current logo. As well as a WIFI symbol that might be nice to have in the logo (or similar) somewhere if it works. The logo needs to be clean and brandable. Just another note, POYNT does not need to be in all CAPS, depending on the design, Iam open to see what the design looks in eith...
...designing and developing embedded systems for medical devices. This includes selecting appropriate hardware components, designing the system architecture, and implementing the software/firmware that controls the device's functionality. • Firmware Development: You would write and debug low-level firmware code that runs on microcontrollers or other embedded systems. This code would be responsible for controlling the device's operations, including data acquisition, signal processing, user interfaces, and communication protocols. • Hardware Integration: You would work closely with hardware engineers to integrate the firmware with the electronic components and sensors used in the medical device. This involves designing and testing the interface...
I am looking for a skilled developer to create a Public Wifi Management Software for our outdoor network with user authentication capabilities. The application should be able to access multi payment gateways like Mastercard and Mobile Money accounts. The estimated number of users for the network is more than 200. The ideal candidate should have experience in developing similar software for outdoor networks and should be proficient in the following areas: - Wireless networking protocols and technologies - User authentication techniques - Network security and encryption - Bandwidth management and optimization - Content filtering and access control The software should be user-friendly, scalable, and able to manage multiple locations. It should also have a dashboard for network monito...
I need assistance with flashing my Netgear R6400v2 router with DD-WRT firmware. I do not currently have DD-WRT firmware installed on my router. I need help obtaining the correct firmware and instructions for my router and for someone to flash the router via remote logon. Ideal Skills and Experience: - Experience with flashing routers with DD-WRT firmware - Knowledge of Netgear R6400v2 router - Ability to remotely logon and install firmware on the router Preferred Method: - Remote logon and installation of firmware on the router
...“Test” and two children to store readings from Pot#1 and Pot#2 - sending two string values from two string fields in RTDB to update two string variables in Nucleo board. This will demonstrate your ability to establish a two way communication between Firebase RTDB and a Nucleo board via a wifi serial transceiver. Software/Hardware requirements: - Use Stm32CubeIDE [version 1.12.1 or higher] exclusively to program a Nucleo board [I currently have Nucleo-F091RC] - Use Arduino IDE to program ESP8266 ESP-01S WiFi Serial Transceiver Module Deliverable: STM32CubeIDE project files Arduino IDE .ino file and libraries Pinout diagram Evaluation: 1- I will connect two potentiometers to Pins A0 and A1. I will compare Firebase RTDB values to the live expression reading...
Hi I want to setup the witeless bridge of the router for my home. The main router is Huawei and the second one is Netcomm. Please let me know the cost of your setvixe. Thanks.
Hello. Im interested in recreating this design and would like the build code for it. Im looking to make it using a CNC machine. The machine requires gcode to operate. The planks are 5ft x 12 inches and 5ft x 16 inches. Notice theres a 1 inch boarder around the design. I want it to be identical. The depth of the engravings are .35 inches. The material thickness is .75 inches. The router bit is .5 inches. Please consider all the aspects when designing this. Thank you so much.
I am looking for a freelancer who can help me set up a VPN home network on my TP Link ER605 router. The desired outcome of this project is remote access to home devices. Additionally, I am looking for increased security and privacy, as well as access to geo-restricted content. I have a variety of devices and systems that need to be connected to the VPN, including computers, laptops, smartphones, tablets, and all other home devices and systems. For this project, I am specifically looking for someone with experience working with L2TP/IPsec VPN protocols. However, I am open to recommendations if you have another preferred VPN service or protocol. Overall, I am looking for a freelancer with a strong understanding of VPNs and network configuration to help me set up a secure and relia...
I am looking for a freelancer to develop a software for my Firebeetle2 (ESP32) wifi relay controller, which will be used for automation. The ideal candidate should have experience in software development and be able to work with mechanical relays. Please read the requirements in the attached files.
I am looking for a freelancer who can help me update the IOS software on my Cisco 887 router and WLAN-AP. Currently, I am not sure what the current version of the IOS software is. I would prefer the latest stable release for the upgrade. I am not looking for any additional features or configurations to be implemented during the upgrade. I just need the IOS upgrade to be completed. Ideal skills and experience for this job include: - Experience with Cisco IOS software - Knowledge of WLAN-AP IOS - Ability to troubleshoot and resolve any issues during the upgrade process - Strong communication skills to keep me updated on the progress of the project.
1. Configuring monitoring tools for the database 2 Add more nodes to make more resilient to failures. (increase reading and writing) 3. Monitor the performance of MySQL router and its ability to handle traffic from the applications
Embedded Engineer who can write firmware for an Industrial Gateway from Scratch to Hero. Understanding & Experience in a. Modbus RS485 Communication b. 4g Network Communication c. MQTT Communication d. Database for Configuration from System App Open for Fix Bid, FTE, Contract, Hiring etc,.
I am seeking a skilled firmware developer to work on the development of firmware for the MSP430F5529 microcontroller. The project involves developing firmware code to enable the UART communication with MAX485. Responsibilities: - Develop firmware code in Energia for the MSP430F5529 microcontroller. - Conduct thorough testing and debugging to ensure the reliability and stability of the firmware. - Document the firmware design, code structure, and any modifications for future reference. Requirements: - Strong experience in firmware development for microcontrollers, specifically the MSP430F5529. - Familiarity with Energia. - Knowledge of UART communication protocols. - Should have the MSP430F5529 development board. If you are an experienced ...
...receiver with the device connected to WIFI. The sensor shall have a verification loop, to ensure that a package is present. Working with multilple sensing loops, to ensure that a package is detected. This to ensure that the devise will not send a message, if a hand is triggering the sensor. When the sensor definetely has detected a package, the LED turns RED and a message is send to a defined receiver "Package in the Box". The sensor keeps detecting the package in the box. When the package is removed, the LED turns GREEN. I am asking for a complete project, including hardware and software. The hardware is supposed to be connected to mains supply via a powersupply. The LED are not included in the project. We install these. 12V output for 1 or 2 LED's. A WIFI...
I am looking for a freelancer who can install Wifite2 on my GL-Inet mt1300 OpenWrt router. I have some experience with OpenWrt routers, but I am looking for someone with more expertise in this area to ensure the installation is done correctly. The primary purpose of installing Wifite2 is for network security testing. I have already installed some other software or packages on the router. Ideal skills and experience: - Experience with OpenWrt routers - Expertise in installing and configuring Wifite2 - Knowledge of network security testing - Familiarity with other software or packages that may have been installed on the router.
IT and Beyond needed. Trying to create a powerful system with a Mac desktop and mouse to capture incoming requests from a platform. They list their tech requirements on their site. Need to review our system and office, check speeds, think creatively for gaining speed through every aspect- our Wifi, Mac, mouse, IOS system, RAM, etc. How do we close the gaps in order capture more incoming business that 100’s of people are simultaneously attempting to do the same? We need to do all of this via Facetime in order to show all of the pieces and assess properly. You must know the nuances and have extensive experience in this area. Think big time gamer/programmer. I’ve just upgraded the Mac and various mice to start. Let’s talk hard wiring, mouse nuances with ...
we will connect the arduino with two of the servo motors and will connect arduino to wifi and than make a webpage which can be accessed through local host which consist of two controllers one is 0 to 90 and other is 180.
Java, Python, C++, Kotlin, and Rust High level skills Required to Understand Google Pixel Firmware.
Hi, I'm reaching out from a company called Keycafe () We create electronic Smart boxes for keys so that car-sharing companies, apartments, or even vacation rentals can have a place to check keys in and out. Our Smartbox connects via cellular, WIFI/Ethernet, we would like to do some testing on the WIFI and cellular at one of our locations. You'll take notes and provide us with feedback as to how the system is operating. This will require an ON-site visit. The client is located in New Hampshire, US.
I need to connect the arduino with two of the servo motors and connect arduino to wifi and than make a website which consist of two controllers one is 0 to 90 and other is 180
About TRACER: Tracer is an electronic IoT device, it works as a high precision tracking/telemetry/telematics tool. It has CANBUS/GPS/4G/WIFI built-in technologies. About the company BLUE CIRCUITS: We are a tech company of hardware engineering and embedded systems applied directly to data acquisition, control and remote monitoring. About the logo: -It can be based on a font with simple details, or even a simple emblem along the name. -The design must bring the idea of technology, robustness and precision. -The logo must be clear and easy to be reproduced in small sizes. -It should look good monochromatic as well. -It is supposed to be simple, so forget the idea of a very detailed logo. -The final files pack must contain a vector format. You can find photos of the product and mor...
"M" firmware continuous streaming modification project. We need a firmware engineer to help us with firmware changes for an EFR32BG12 Gecko Bluetooth ®Low Energy SoC 32-bit ARM® Cortex®-M4? We have a working product with firmware that needs to be modified on the MCU. It is a Silicon Labs EFR32BG12P432F1024GM48 embedded into a PCB board we call the "M." This is an IoT device. he project is small but requires expertise that the engineer is familiar with Silicon Labs IDE/SDK, and C coding on the EFR32 SOMs. We can provide a completed product with the "M" PCB installed with the existing software and the source code. The engineer must provide the development environment (including the correct cable) and the know-...
Must have done it in the past for wifi device integration and voice. must show brands that were completed and also for voice. DO NOT BID IF YOU HAVE NOT DONE IT BEFORE. PLEASE BIG YES WE HAVE DONE ABC BEFORE
I am looking for a freelance writer to create an academic article on Solving the Mesh Router Nodes Placement in Wireless Mesh Networks with Optimization Algorithms. The article should be 5000 words and written in an academic format. I will provide specific sources and research materials that must be included in the article. The ideal candidate will have experience in academic writing and possess strong research skills. The article should be well-structured and provide a clear understanding of the topic. I want to use different algorithms such as Particle Swarm, Genetic Algorithm, etc I am attaching one article but we need to attach more articles depending on what we want to write. I want to work with the method of milestones, for each section of the article I will pay according to ...
I am looking for a freelancer who can assist me with data entry and validation for my OT assets. The assets I need help with include PLCs, HMIs, SCADAs, and drives, a... SCADAs, and drives, among others. I prefer to use Excel for data entry and validation, I already have a template with examples. The ideal candidate should have prior experience in data entry and control engineer with OT assets experience and be familiar with Excel. The candidate will be require to check an export of asset list and add individual assets with associated information (IP, Model, Firmware Version, etc) in a separate sheet. There will be an opportunity for the ideal candidate to work with on a long term basis. As I have over 100 assets that require validation, I need someone who can work efficiently and a...
We created new IP Range for Wifi users Our LAN Network is 193.x.x.x We can ping between networks and that works fine but users can't access the shared drivers when on the wifi network
We need someone who can work an electronics project, using arduino, ESP32. Need to develop firmware, schematics and PCB layouts, etc. related work. freelancers from Delhi, India only will be preferred.
...workers/partners) Our requirements are incredibly simple including: -Sharing pictures of equipment on deals we are collaborating on -Sharing documents, including .XLSX, .DOCX, and .PDF primarily -Ability to upload and download by all parties with any access level(Initially..later we'll work on adding permissions) -Currently we will run most computers via hardwire but this afternoon I'll be adding a router to it which will need to be setup for other computers to access it via Wi-Fi. Pretty much it! I am requiring a rather simple business server to be setup for use at my home and soon to be shared by approximately 6 in-house staff and connected with 1 additional server, with remote employees/partners needing to connect with incredible ease(Up to 10 remote workers/partn...
...scheme will consist of a DMZ in which there will be, at a minimum, one independent web server. On the other hand, there will be a LAN, composed of at least one NAS server and a Linux machine that will simulate the employees' computers. Our physical equipment will simulate connections from the outside (the WAN network) and it will be through this that all configurations will have to be made. A router/firewall will interconnect the different networks with each other. The firewall must control the following: - From the outside, you can access the DMZ, but not the LAN (except from our physical equipment). - From the LAN, you can access the DMZ and the outside. - From the DMZ, you cannot access the LAN or the outside. An intrusion detection and protection mechanism will have...
...needs to be visually appealing and sophisticated. I prefer a luxury/sophisticated style for the flyer, so the designer should have experience with creating luxury designs. The flyer must include: LOCATED IN PAPILLION NEAR 72ND & CORNHUSKER AMENITIES 24/7 Access All Utilities Included Ample Parking Custom Luxury Cabinets & Color Station Customizable LED Lighting Free Washer & Dryer High-Speed WiFi Locker & Storage Space Management On-Site Refrigerator & Microwave Soft Water System Stylist Friendly Website & Social Media Upscale Salon Chair & Anti-Fatigue Mat BENEFITS Be Your Own Boss Busiest Intersection in Sarpy County Establish Local & Digital Presence Growing Papillion Community Innovative Business Concept Strategic Location AVAILABLE SPAC...
...In-depth knowledge and expertise in working with NRF52 microcontrollers and ATEcc608A Crypto Chips. Proficiency in programming languages such as C/C++ for microcontroller firmware development. Strong understanding of cryptographic protocols, secure key storage, and hardware-based security mechanisms. Experience in integrating cryptographic chips with microcontrollers, ensuring proper communication and secure data transfer. Familiarity with development tools and platforms commonly used in embedded systems. Responsibilities: Study the project requirements and provide technical recommendations for the integration process. Develop firmware and drivers for the NRF52 microcontroller to establish communication with the ATEcc608A Crypto Chip. Implement secure storage mechanisms f...
I am in need of a freelancer who can assist me with programming tasks for the EFR32BG12 Gecko Bluetooth Low Energy SoC. Specifically, I require assistance with ARM programming. The deadline for completing the programming tasks is within 1 week. Ideal Skills and Experience: - Experience with EFR32BG12 G...assist me with programming tasks for the EFR32BG12 Gecko Bluetooth Low Energy SoC. Specifically, I require assistance with ARM programming. The deadline for completing the programming tasks is within 1 week. Ideal Skills and Experience: - Experience with EFR32BG12 Gecko Bluetooth Low Energy SoC - Proficiency in ARM programming - Ability to meet tight deadlines We have a working product with firmware that needs to be modified from sending 1 second of data to a continuous strea...
I’m looking for someone to create a project using STM32CubeIDE to read ADC value from a sensor using Nucleo. I have ESP8266 ESP-12F that I’d like to use to connect to my wifi to send the adc value to firebase.
Hi Tono, Hope you're well? I'm in the middle of shooting another project. I have two days worth of shots here. There will be some more. 120 ish in total. Would you please: -Clean skin to my usual spec. -Clean backgrounds for footprints and creases. -Clean any dust or stray threads from clothes. -Clean up any stray hairs etc. If you a...middle of shooting another project. I have two days worth of shots here. There will be some more. 120 ish in total. Would you please: -Clean skin to my usual spec. -Clean backgrounds for footprints and creases. -Clean any dust or stray threads from clothes. -Clean up any stray hairs etc. If you are unsure please give me a message. I won't be able to send the files until tomorrow because of poor wifi but you should receiv...
Problem Statement: The problem statement is to compare temperature sensor values, and the goal is to design a prototype that can support various functionalities. These functionalities include an LED light that shows the Wifi connectivity status, a 5V adapter connection through a jack, battery integration to ensure the prototype works even if power is off, a slot to connect a minimum of three sensors (DH11, DH22, 18B20, etc.), a small LCD screen to display the sensor readings, a memory card to store data locally, a reburn slot, and a reset button for wifi connection reset. The prototype uses ESP-12E and can be powered directly or indirectly through the adapter or battery. To ensure the prototype works properly, it is important to deploy the components in a way that they will ...
I work for a community center with fiber optic internet. Wifi and lines are currently down but we are receiving a signal from provider. Just need help sorting the problem and getting back online.
...computer work on mode A or B (explained later) - create Users (can be hundreds) - admin can do anything, as usual (it is a normal Windows computer) 2) User: - Computer starts on mode Standard or Limited (explained later), depending on the setting of the Admin - User cannot modify any hardware or operating system setting - Network: off - Camera: off - USBs: limited - Other ports: off - BLE: off - WiFi: off - Desktop background config (colour, wallpaper, resolution, etc): off - Games: off - Access to "regedit", "cmd" and "powershell": off - Install programs: off - Mouse changes: off - Keyboard changes: off - Touchscreen config: == YES == - Access to any folder (folder explorer): off - Access to an exchange folder: == YES == (this means, the user can c...
...material and stainless steel cladding. I have specific requirements for the design, and architectural drawings, but do not have existing plans. The dimensions of the cabinetry are custom sizes. Ideal skills and experience for this project include: - Proficiency in CAD software, SolidWorks, Mozaik CNC Cabinet Software etc. - Experience in creating shop drawings for custom cabinetry to be cut on CNC router tables. - Knowledge of materials and finishes for cabinetry - Attention to detail and ability to adhere to specifications - Strong communication skills to ensure project requirements are met. The work will consist of creating models, clear concise shop drawings for approval from Architect and all supporting files including DXF's SLDPRT as needed. Please allow for revisions...
My internet connection on my work computer is unstable despite the other devices in the home operating effectively.
