Yocto gstreamer jobs

I need some help with my Yocto Project Everything compiles perfect , but my Openssl version is 3.0.5 and i need to change it to version 1.1.1q The folder /poky/meta/recipes-connectivity/openss has 1.1.1q but it pulls 3.0.5 from somewhere . Should be a easy task for someone thats clued up with Yocto.

We have product and yocto bsp's, we need to build or develope this yocto project

We have product and yocto bsp, we need to compile and release the OS

In order to use the IMX477 camera with BalenaOS (based on Yocto), we need a developer to write the necessary kernel patch and builds us a custom BalenaOS. You can find the necessary information in this forum: Thank you! :)

We need a go lang developer for a working on a video streaming application. Experience of webrtc and gstreamer is a plus.

I would like someone who has experience in OpenCV, CUDA, GStreamer and Docker. I would like for someone to build me a docker container that will allow me to stream an RTSP feed in mp4 with bounding boxes over the faces. I am only after facial detection and NOT any facial recognition. I would like the container to be able to accept an RTSP feed using openCV and Nivida GPU CUDA cores to decode and apply bounding boxes on peoples faces, once this is done I need it to stream the video in mp4. Here is a docker container that has most of what we need, just need to add rtsp stream, bounding boxes and out a mp4 stream.

We have a RK3328 device running Yocto with linux 4.4. It has ES8316 audio codec but it is not configured properly. We need someone to configure it and fix some minor bugs. ( HDMI resolution detection error, Wake on LAN etc. ). Feel free to contact me for more information.

We are looking for someone with a lot of experience with webRTC to help our cloud team make some strides. Equity package is available for the developer who outperforms!

Hello, Im looking for experienced dev with knowledge in gstreamer ffmpeg WebRTC p2p TURN/STUN. Nice to have - Rust or Go. To do is PoC where input - HDMI video, output - video stream in web browser. Most important is low latency.

...appreciated. • Knowledge of tools like GNUMake, CMake, etc. • Yocto Project • Basic knowledge of Linux kernel, device drivers would be good plus. • Collaborating with the rest of the engineering team to design and deploy the code to test/production environment. • Debug, validate, review and test new and existing code. • Experience with Linux Environment (Kernal Level Knowledge). • In-depth knowledge of relational databases (e.g. MySQL, PostgreSQL) and NoSQL databases (e.g. MongoDB). Knowledge of distributed systems is a plus. • Experience using system monitoring tools, automated testing frameworks and implementing server-side security. • Version Control using GitLab. Benefits: • Deep-Tech Learning :– Operating System Buildin...

I am trying to get the coral devboard to boot with buildroot. There is a yocto build to use as reference.

I am trying to get the coral devboard to boot with buildroot. There is a yocto build to use as reference.

this task is only for Pion/Ion-sfu well experienced GoLang coder if you have no or very basic expereince with it, don't contact me please. need small help for existing ion-sfu to setup to save tracks to a local WebM file while using a secured connection (TLS certificate handshake) via GStreamer sink. you need to be experienced Go coder preferred with ion-sfu and knowledge of setup GStreamer on Amazon Linux 2

Based on yocto RDK B raspberry pi board coding language c environment linux

need small help for existing ion-sfu to setup to save tracks to a local WebM file while using a secured connection (TLS certificate handshake) via GStreamer sink. you need to be experienced Go coder and ion-sfu and knowledge of setup GStreamer on Amazon Linux 2

need small help for existing ion-sfu to setup to save tracks to a local WebM file while using a secured connection (TLS certificate handshake) via GStreamer sink. you need to be experienced Go coder and ion-sfu and knowledge of setup GStreamer on Amazon Linux 2

The project requires an Embedded Programmer having experience in Driver Programming for FPGA cards, PCIe Interface and YOCTO as well as upbringing the Linux OS. Please DO NOT APPLY, if you DO NOT HAVE THE REQUIRED EXPERIENCE.

need small help for existing ion-sfu to setup to save tracks to a local WebM file while using a secured connection (TLS certificate handshake) via GStreamer sink. you need to be experienced Go coder preferred with ion-sfu and knowledge of setup GStreamer on Amazon Linux 2

need small help for existing ion-sfu to setup to save tracks to a local WebM file while using a secured connection (TLS certificate handshake) via GStreamer sink. you need to be experienced Go coder preferred with ion-sfu and knowledge of setup GStreamer on Amazon Linux 2

I do have a problem that most find to difficult. The budget is up for debate if you can do the job. Wayland had a backend that streams screen content to another computer using MJPEG. As this is very CPU intense I want to encode the stream to H.265 using the GPU instead. This must all happen without copying any waw data to the CPU, only the compressed stream. The API for...that most find to difficult. The budget is up for debate if you can do the job. Wayland had a backend that streams screen content to another computer using MJPEG. As this is very CPU intense I want to encode the stream to H.265 using the GPU instead. This must all happen without copying any waw data to the CPU, only the compressed stream. The API for doing this is VAAPI although I think that gstreamer can do it...

IoT Project for Elevator Management System. Need a software developer a Python programmer to configure Single Board Computer (SBC). Configure the SBC as follows: 1. Configure the READ function to collect the Data on RS-485 port from a Daisy Chained I/O modules. Architecture diag. attached ( max. 8- I/O modules with 45 connection each, daisy chained and connected with SBC on RS-485 port) 2. Configure the Master - Slave and daisy chaining. 3. Configure the MODBUS registry. 4. Configure WRITE function to receive command from Cloud application and trigger the I/O board. 5. Push the data to third party cloud solution in JASON format. 6. Make sure the data is collected and pushed on the cloud software successfully. 7. Need assistance after deployment in case any ambiguity arises. 8. GUI for int...

...to work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: June/July 2022 Duration of projects: Between 6 to 12...

...devices, etc.) which includes streaming functionality, and the conditions required for the streaming, you are asked to use your expert opinion to make a report about what streaming technology should be used in this particular case so that the given conditions are fulfilled. That must include the choices for the streaming protocol(s) (- RTMP, WebRTC, etc.), software (- libraries, frameworks- GStreamer, etc.), encoding/ re-encoding, etc. along with the explanations regarding why the technologies that you chose are better than other similar ones. You must have deep expertise in streaming and must have done many past projects using various technologies. If you don't, please do not apply. Notes: - There is no required software development or coding for this project. The deliv...

I want my own kernel and image for the Radxa Rock PI E Board compiled with the yocto framework. there is an existing support with instruction is on this site: there are some problems when compiling raxda used and old branch dunfell and there are compiling errors with 2 packages. you got access to my linux debian server, where the yocto enviroment is installed. goal: + ready image for my sd card + bitbake -k radxa-console-image + documentation what was the solution + hourly recording about your work skills: embedded software Yocto Buildroot Linux programming C/C++

I have Ubunto VM. I have installed Yocto dunfell image, ad built it correctly (command line full image). I have been able to boot my Raspberry Pi 400 successfully with it. Now I want to setup the SDK for the same. But not able to follow the detailed procedure well on Need somebody to do the job.

Development of embedded near real time solutions on a Linux platform in a Yocto Project environment. Ability to emulate touch screen functionality from conceptual scetches, and actuate resultant hardware command instructions to analog hardware through I2C, USB, LVDS Display and SPI communications protocols will be required. Familiarity with TCP-IP over Ethernet interfacing as well as DICOM and HIS/RIS application protocols is a major plus. Project is currently centered on NXP i.Mx8m_Mini evaluation board. Familiarity with the programming of this board is a plus. Please provide a portfolio of work at this level for consideration. Projects that are actually being marketed and can be downloaded / evaluated today are preferred.

I have Ubunto VM. I have installed Yocto dunfell image, ad built it correctly (command line full image). I have been able to boot my Raspberry Pi 400 successfully with it. Now I want to setup the SDK for the same. But not able to follow the detailed procedure well on Need somebody to do the job.

Searching for Linux kernel developer, Network programmer, network device driver expert, yocto Linux expert.

I am looking for an embedded linux expert who has experience about Yocto and STM32MP157. I have a MYD-YA-157C Development board of MyiR. I am looking for someone to guide me and want to make a partnership in some projects

Please do NOT bid if you do not have the following experience This project requires an Experienced Embedded Programmer. 1. Prior experience in writing Interrupt Service Routines in Linux is a must 2. Prior experience with YOCTO is a must 3. Prior experience with Xilinx xDMA is a must 4. Prior experience with PCIe Interface is needed. 5. Familiarity with RISC-V architecture is a plus.

I need to setup a development environment on my Ubuntu VM. I will build code for Raspberry Pi 400, with yocto embedded linux. Also, I will build the code locally so I'll need the SDK. And to enable remote debug I will use Netbeans or some other platform. Currently I am using Ubuntu VM and able to run and debug on Raspian OS. But now I want to shift to real embedded, where the application will be merged with the OS that will run as a real embedded system, using yocto. I am using all peripherals of Raspberry, and I am writing code in C.

Hi, Basically, this issue needs to be resolved: It all starts when I try to follow this tutorial: issue: Reading file would overwrite reserved memory. Failed to load '

...work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: May 2022 Duration of projects: Between 6 to 12 mont...

...work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: May 2022 Duration of projects: Between 6 to 12 month...

...documented. 5. XC7Z020-1CLG400C FPGA (or better, from the same series) from the Xilinx lineup is to be used. Verification will be carried out on the Digilent Zybo Z7 Board. Necessary drivers and bring-up to be provided as a set of Yocto packages B. Software/Firmware: 1. Host device for the interface detailed above shall be a BeagleBone Black device (), with the interface provided as a Cape, following the hardware interface specification for said capes 2. Device drivers and full Linux source image shall be provided as a fully integrated Yocto package - this will be bundled with the lower-level firmware and drivers referred to in hardware specification in (A) above 3. All source code shall be extensively documented and provision for both production and debug version

I'm looking for someone to make a raspberry pi 4 yocto recipe for the driver found at this github.

(Only on Full Time Basis : 8 Hours per Day)---->Microprocessor based Board Development and Firmware is done and now application layer need to be developed for MPU requirements. Development will be using C language and Operating System is Yocto Linux. I have not provided MPU chip name as we are OK to train the person if he/she is aware of C programming and Yocto development platform. Since Hardware is available at Pune and Ahmedabad only, we need you to work from either Pune or Ahmedabad location.

Hi, Basically, this issue needs to be resolved: It all starts when I try to follow this tutorial: issue: Reading file would overwrite reserved memory. Failed to load '

I am looking for a developer that has e a good knowledge of Janus Javascript API to create REST API dynamic stream calls requests. Create RTSP Gstreamer pipeline with wetrtcbin plugin to stream multiple videos from different mount points using port 8554. JavaScript, Janus, RESTful API, API Development, Python, GStreamer MAX bid $100

Hi! I'm interested in working with you. Do you have experience with Gstreamer and Xamarin? I need a Xamarin project for Visual Studio 2019 similar to the official Gstreamer's Android Tutorial 2 (Audio player) using the C# bindings "gstreamer-sharp" if it is possible. Do you think that this is possible? Thanks in advance

Hi! I'm interested in working with you. Do you have experience with Gstreamer and Xamarin? I need a Xamarin project for Visual Studio 2019 similar to the official Gstreamer's Android Tutorial 2 (Audio player) using the C# bindings "gstreamer-sharp" if it is possible. Do you think that this is possible? Thanks in advance

I would like to port the Gstreamer Android Tutorial 2 to a Xamarin C# App.

QT hello world projects with gstreamer and ffmpeg within qt creator and or qt design studio

Require the following - An Application (langauge up to freelancer, however C+/Python probably most suitable for this) that can stitch together 3x CSI-2/MIPI cameras and output a panoramic video in realtime, ideally output to something that can be handled via gstreamer or ffmpeg (gstreamer preferred) pipe. - Requires use of CUDA (Xavier NX has both CUDA cores and discrete encoder and decoder), minimal use of CPU (20% or less) Information about system - Jetson Xavier NX (non dev kit) 8GB ram - Hosted on custom carrier board, cameras are operational on board (/dev/video0, video1, video2) - OpenCV 4.5.3 /w CUDA is built - FFMPEG with NVMPI enabled is built - Python 3.6 Do not bid on this project if you have no experience in - Real time camera stitching - OpenCV / CUDA...

We have an ARM based module that will be connected to the Internet via the Ethernet interface(eth0) and we would like to control how WiFi clients(uap0) then access the Internet via eth0. We are restricted on what modules are available as the project has a precompiled Kernel and any changes requires a Kernal compile. Software is ARM based Toradex module iMX8 with Linux Yocto running these modules: -systemd -resolved -iw -connman -hostapd -dnsmasq -dhcpd not compiled into this kernel -iptables WiFi is configured as uap0 Ethernet is eth0 The requirement is to provide the configuration files (, , etc) and scripts necessary to provide the following: -Setup eth0 to be connected to router providing the DHCP and Internet access -Setup the WiFi (uap0) as an access point to

live rist stream from device to jenus server have you ever worked on rist live stream through Gstreamer?

From an existing Yocto version, we need to improve it by adding Bluetooth and CAN communications. The embedded plateform is a SMT32MP157F with a Cortex A7.

...experienced with GStreamer (C++) - Mandatory - WebRTC experience (major advantage) - FFMpeg or other solutions that may provide what we need (advantage) 2. Video receiving application that implements following GStreamer pipeline: a. Receives data from step 1.f above b. Sends data into appsink for custom processing: i. A simple placeholder routine that decodes video frame - pull sample, get buffer, decode content to new buffer and push buffer. c. Application sends RAW data from 2.b to appsrc d. Appsrc sends data to (configurable): i. v4l2sink ii. x264enc that: 1. Encodes RAW data 2. Sends it to webrtcbin e. Full pipeline is: udpsrc -> appsink -> custom processing -> appsrc -> v4l2sink or x264enc -> webrtcbin 3. Implementation details: a. Development should t...

Hello! I seek for help in setup of Development Environment (Linux based) for SOMs made by Toradex (iMX6, Tegra T30) for Yocto Linux Embedded and for Torizon layer (over same Yocto). It is required to setup development environment and provide basic step by step on how to run/add/embed/rebuild etc tasks. Simple "Hello World" for OpenGL, GPIO, CAN and LVDS/RGB will be required. Detailed description of the project is provided in attached document. Thank you

Implement an H265 packetizer and depacketizer according to the H265 specification in the open source library Pion: A reference implementation can be found in gstreamer The pion one should function identically